1-DEC-DC

4-fold decoder for single coil turnouts for DCC Digital
and LGB- (EPL 12010) or KATO- (UNITRACK) drives
from our Digital-Professional-Series !

1-DEC-DC with the dimensions 89 x 67mm for EPL or KATO Unitrack turnout drives.

Functional extension: The 1-DEC-DC can now shift turnouts with the function keys  F1 to F4 of  loc-addresses (e.g. Lokmaus 2® and R3® from Roco)! 

• For digital control of:

  Up to 4 turnout drives EPL 12010.

          Up to 4 KATO turnout drives.

  

          Each output can be loaded with nominal current up to 1 Ampere.

   

• Simple and secure connection of electrical power supply and turnout drives by screw clips.

• The power is supplied to the decoder either from the digital circuitry or through a separate input directly from the alternating current (AC) output of a model railway transformer (14 to 18V~). Valuable digital current can be saved !

• 1-DEC-DC is a 4-fold decoder with self learning decoder address:

  The decoder address can be set by just pushing the 1-DEC-DC programming key and then a key of the turnout switchboard (also LGB Universalhandy 55015) or by a switch command through a PC with connected INTERFACE.

   

  The decoder address will be permanently stored, but can always be changed by pressing the programming key again. It’s as simple as that !

• Available as a ready for use finished module or as a kit on a 89*67 mm pc-board with 4 bores for mounting purposes (suitable installation material and a splash water protected case for outside application can be ordered under accessories).

• Switching of turnouts or signals with the LGB Universalhandy 55015 is possible. For programming the 1-DEC-DC decoder is the "Programmer" not required.

• Decoder from our Digital-Professional-Series can be operated without any difficulty from your digital controlled model railway. This decoder is 100% compatible with the DCC standard.

• The finished module comes with a 24 month warranty.

• Each 1-DEC-DC Decoder will be supplied with a detailed operating-/ assembly instruction.

• The 1-DEC-DC is available as a kit or as checked finished module:

• Order codes:

1-DEC-DC-B (Part-No. 110411): 4-fold turnout decoder for DCC digital-systems as a kit.
1-DEC-DC (Part-No. 110412): 4-fold turnout decoder for DCC digital-systems as a finished module.

 

Subject to technical changes and errors.

© 2007 by LDT