Adap-Roco   

For the DigitalBooster DB-2 from the Digital-Professional-Series !

If you want to use our low-cost DigitalBooster DB-2 as well on a Roco-digital central unit 10761 or 10764 you can apply now the Adapter Adap-Roco.

Up to 10 DigitalBoosters DB-2 can be connected to each Adapter Adap-Roco.

Opto-couplers at the Adapter Adap-Roco will provide a galvanical separation between booster and digital central unit 10761/10764 and will therefore assure a safe electrical operation.

The Adapter Adap-Roco will be supplied as kit, as tested finished module or as tested finished module in a case. Suitable installation material and an empty case LDT-01 for the installation of up to two Adapter Adap-Roco for a kit or a finished module can be found under Accessories.

Further sample connections of the Booster Adapter Adap-Roco for downloading can be found here!

Each Booster Adapter Adap-Roco will be supplied with a detailed operating- /assembly instruction.

Each Adapter Adap-Roco will be supplied together with a cable for the connection to the digital central unit 10761/10764.

• Order Codes:

  Adap-Roco-B (Part No. 088401): Adapter from Roco-Booster bus to the 5-poles (DB-2) Booster bus as kit.
  Adap-Roco-F (Part No. 088402): Adapter from Roco-Booster bus to the 5-poles (DB-2) Booster bus as finished module.
  Adap-Roco-G (Part No. 088403): Adapter from Roco-Booster bus to the 5-poles (DB-2) Booster bus as finished module in a case.

  Available ex warehouse.