NEW     Adap-CDE   NEW

For the DigitalBooster DB-2 from the Digital-Professional-Series !

The Booster Adapter Adap-CDE-F as a  finished module on a  76 * 43 mm printed circuit board.

If you want to use our low-cost DigitalBooster DB-2 as well on a digital central unit which does not support a 5-poles booster bus but the 3-poles DCC-booster bus only you can apply now the Booster Adapter Adap-CDE.

The application of the DigitalBooster DB-2 on e.g. Lenz Digital plus Systems or together with the PIKO Digi-Power-Box is now possible via the Adapter Adap-CDE.

Up to 10 DigitalBooster DB-2 can be connected to each Adapter Adap-CDE.

Opto-couplers at the Adapter Adap-CDE will provide a galvanical separation between booster and digital central unit and will therefore assure a safe electrical operation.

The Adapter Adap-CDE will be supplied as kit, as tested finished module or as tested finished module in a case. Suitable  installation material and an empty case LDT-01 for the installation of up to two Adapter Adap-CDE for a kit or a finished module can be found under Accessories.

Further sample connections of the Booster Adapter Adap-CDE for downloading can be found here!

Each Booster Adapter Adap-CDE will be supplied with a detailed operating- /assembly instruction.

 

The Booster Adapter Adap-CDE-G as a finished module in a case for operating up to 10 Digital Boosters DB-2 on DCC-Digital Central Units.
 

 

Two Booster Adapters Adap-CDE for the operation of up to 20 Digital Boosters DB-2 on DCC-Digital Central Units can be assembled into one Case LDT-01.

 

   kit
(-B)
 finished module
(-F)
finished module in a case
(-G)
Adap-CDE € 19,90 € 29,90 € 32,90

Subject to technical changes and errors.

© 2007 by LDT