Adap-LS

For all LDT Light-Signal-Decoder of the Digital-Professional-Series !

Now is the digital switching of signals containing incandescent lamps with the LDT Light- Signal-Decoder LS-DEC possible by application of the Adapter Adap-LS.

If you use light signals containing light emitting diodes and incandescent lamps (e.g. OEBB-light signals of company alphamodell) you can connect them via the Adapters Adap-LS to the Light-Signal-Decoder LS-DEC as well.

Also light signals with light emitting diodes which require a constant operating voltage (e.g. gauge 1 signals of company Besig or DR-light signals with light bars of company Erbert) can be controlled with the Adapters Adap-LS.

The Adapters Adap-LS will just be plugged into the clamp-bar of the Light-Signal-Decoder LS-DEC and secured with screws.

---

Sample connection for downloading can be found here!

---

Each adapter Adap-LS-A  or Adap-LS-K comes with a detailed operating-/ respectively assembly- instruction.
 

You can choose from the below table which adapter Adap-LS you require for your light signals:

 

The Adapters Adap-LS are available as low cost  kits or as controlled finished modules:

• Order Codes:

  Adap-LS-A-B (Part No. 540011): 2 adapters version A for all LDT Light Signal-Decoders as kits.
  Adap-LS-A (Part No. 540012): 2 adapters version A for all LDT Light Signal-Decoders as finished modules.

  Adap-LS-K-B (Part No. 550011): 2 adapters version K for all LDT Light Signal-Decoders as kits.
  Adap-LS-K (Part No. 550012): 2 adapters version K for all LDT Light Signal-Decoders as finished modules.