DB-2

DigitalBooster
from the Digital-Professional-Series !

Amplification of the data formats Märklin-Motorola, mfx®, M4 and DCC.

The DigitalBooster DB-2 is a short circuit protected Power-Amplifier (Booster) for digital model railway layouts.

It supplies a digital current of 2,5 Ampere.

The DB-2 shall be connected to the command station (e.g. Control Unit, Central Station 1 and 2, ECoS, Intellibox 1 and 2, TWIN-CENTER, Commander, EasyControl) or to another booster (e.g. DB-2, DB-4, 6015, 6017, Power 2, Power 3) with the supplied 5-poles booster-bus cable. The first booster shall be always directly connected to the command station via the 5-poles cable. The second booster shall be connected to the first booster etc.

The DigitalBooster DB-4 amplifies the data formats Märklin-Motorola, mfx®, M4 and DCC.
 
The DB-2 can be connected to any command station which supports the 5-poles booster bus:
Control Unit, Central Station 1 and 2, Intellibox 1 and 2, EasyControl, ECoS 1 and 2, Commander, DiCoStation, KeyCommander and TWIN-CENTER.
 
Each Power-Amplifier DB-2 will be supplied with a 5-poles boosterbus-cable (1m length).
 
For the supply of the DigitalBooster DB-2 are model railway transformers suitable with a capacity of min. 50VA and an alternating current of 16 to 18 Volt (e.g. from Conrad Electronic Part No. 21 27 28 with 52VA / 18V).
 
If you want to use the DigitalBooster DB-2 on a command station which does not supports the 5-poles booster bus but only the 3-poles DCC-Boosterbus (clamp marking DCE) (e.g. Lenz Digital plus, IB-Basic and IB-COM) you can use the Booster-Adapter Adap-CDE.
 
If you want to use our low cost DigitalBooster DB-2 as well on Roco- or Fleischmann command stations (Roco Part No. 10761 and 10764 / Fleischmann Part No. 680901) and multiZENTRALEpro you can use the Booster-Adapter Adap-Roco.
 
LDT-Components from the Digital-Professional-Series can operate on your digital layout without any problems. The finished module in a case comes with 2 years limited warranty.
 
Each DigitalBooster DB-2 will be supplied with a detailed operation- respectively assembly-instruction.
 
The DigitalBooster DB-2 can be purchased as kit or as checked finished module in a case:
  kit (-B) finished module in a case (-G)
DB-2 € 47,90 € 73,30
DB-2-B (Part No. 080061): short circuit protected DigitalBooster (2,5 Ampere) as kit.
DB-2-G (Part No. 080063): short circuit protected DigitalBooster (2,5 Ampere) as  finished module in a case.
 

Subject to technical changes and errors.

© 2011 by LDT