Detailed operating instructions, assembly instructions and
sample connections for all our products are available for downloading
on your PC. All files are stored in ZIP-format. With the operation system
Windows XP you can unpack the zip-files directly. If you use another
operation system which does not offer this feature you can find a
freeware-program for unpacking the zip-files at
www.7-zip.org.
There is also our current price list and an order form available for
downloading.
All ZIP archives contain PDF-files, which can be red
and printed with the
Adobe Acrobat Reader
.
Further examples are available on the following page:
Sample Connections.
If you have any question, please send us an in english language.
|
|
|||
|---|---|---|---|
| QS-DEC-II | A 4-fold turnout decoder like the k83 but with self learning decoder address. | ||
| Assembly instruction (kit): | |||
| qsdec_05_30_engl.zip | 20KB | edition 01/07 | |
| Operating instruction: | |||
| qsdec_04_30_engl.zip | 71KB | edition 01/07 | |
| S-DEC-4 | A 4-fold turnout decoder (like the S4, k87N, k83 or LS110) but with self learning decoder address. With an external power supply. | ||
| Assembly instruction (kit): | |||
| sdec4_05_mm_21_engl.zip (Märklin Motorola) | 39KB | edition 01/07 | |
| sdec4_05_dc_21_l_engl.zip (DCC) | 21KB | edition 01/07 | |
| Operating instruction: | |||
| sdec4_04_mm_21_engl.zip (Märklin Motorola) | 94KB | edition 01/07 | |
| sdec4_04_dc_21_l_engl.zip (DCC) | 77KB | edition 01/07 | |
| sdec4_06_mm_21_engl.zip (Märklin Motorola) | 70KB | edition 01/07 | |
| sdec4_06_dc_21_l_engl.zip (DCC) | 58KB | edition 01/07 | |
| Sample Connections: | |||
| Feedback of the turnout position: | |||
| turnout_feedback.zip | 173KB | edition 08/04 | |
| Switching of Viessmann semaphore signals with solenoids and air pressure cylinder: | |||
| viessmann-formsignale-2l_engl.zip | 180KB | edition 08/04 | |
| viessmann-formsignale-3l_engl.zip | 180KB | edition 08/04 | |
| Digital switching of Minitrix semaphore signals: | |||
| trix-formsignale_01.zip (in German language) | 43KB | edition 09/04 | |
| Assembling and programming of the turnout decoder S-DEC-4: | |||
| 220dasjournal_ausgabe_19_ldt.zip (in German language) | 627KB | edition 07/05 | |
| 1-DEC | A 4-fold turnout decoder (for EPL 12010) with a self learning decoder address: | ||
| Assembly instruction (kit): | |||
| 1dec_05_dc_13_engl.zip | 21KB | edition 04/06 | |
| Operating instruction: | |||
| 1dec_04_dc_13_engl.zip | 80KB | edition 04/06 | |
| DSU | The Permanent Power Switch Unit DSU can be connected to each output of our turnout decoder. | ||
| Operating instruction: | |||
| dsu_04_30_engl.zip | 284KB | edition 10/08 | |
|
|
|||
|---|---|---|---|
| SA-DEC-4 | A 4-fold switch decoder (like the k84) but with a self learning decoder address. | ||
| Assembly instruction (kit): | |||
| sadec4_05_mm_22_engl.zip (Märklin Motorola) | 40KB | edition 01/07 | |
| sadec4_05_dc_22_l_engl.zip (DCC) | 21KB | edition 01/07 | |
| Operating instruction: | |||
| sadec4_04_mm_22_engl.zip (Märklin Motorola) | 97KB | edition 01/07 | |
| sadec4_04_dc_22_l_engl.zip (DCC) | 75KB | edition 01/07 | |
| sadec4_06_mm_22_engl.zip (Märklin Motorola) | 79KB | edition 01/07 | |
| sadec4_06_dc_22_l_engl.zip (DCC) | 61KB | edition 01/07 | |
| Sample Connections: | |||
| Monitor track sections and switching voltage-free: | |||
| monitoring-switching_01_22_engl.zip | 320KB | edition 08/04 | |
| Switching and illumination of waiting signs: | |||
| wartezeichen_engl.zip | 51KB | edition 08/04 | |
| Switching of Viessmann semaphore signals with solenoids and air pressure cylinder: | |||
| viessmann-formsignale-2l_engl.zip | 180KB | edition 08/04 | |
| viessmann-formsignale-3l_engl.zip | 180KB | edition 08/04 | |
|
|
|||
|---|---|---|---|
| M-DEC | A 4-fold decoder (like the LS110 plus 4* adapter LA010) with self learning decoder adress. | ||
| Assembly instruction (kit): | |||
| mdec_05_mm_13_engl.zip (Märklin Motorola) | 21KB | edition 05/06 | |
| mdec_05_dc_13_l_engl.zip (DCC) | 21KB | edition 05/06 | |
| Operating instruction: | |||
| mdec_04_mm_13_engl.zip (Märklin Motorola) | 93KB | edition 02/08 | |
| mdec_04_dc_13_l_engl.zip (DCC) | 93KB | edition 02/08 | |
| Sample Connections: | |||
| Fulfurex- or Lemaco-drives with motor driven turnout decoder M-DEC: | |||
| mdec-fulgurex_01_engl.zip | 73KB | edition 08/04 | |
|
|
|||
|---|---|---|---|
| LS-DEC-DB | A light-signal decoder for 4 LED lamps equipped DB and SBB train signals. With a self learning decoder address and an external power supply possibility. | ||
| Assembly instruction (kit): | |||
| lsdec_05_41_engl.zip | 186KB | edition 03/09 | |
| Operating instruction: | |||
| lsdec_04_db_41_engl.zip | 326KB | edition 04/08 | |
| lsdec_06_db_41_engl.zip | 250KB | edition 04/08 | |
| Sample Connections: | |||
| Light-signal decoder and DB tains signals: | |||
| lsdec-db_info_engl.zip | 363KB | edition 05/09 | |
|
|
|||
|---|---|---|---|
| LS-DEC-DR | A light-signal decoder for up to 4 LED lamps equipped DR train signals. With a self learning decoder address and an external power supply possibility. | ||
| Assembly instruction (kit): | |||
| lsdec_05_41_engl.zip | 186KB | edition 03/09 | |
| Operating instruction: | |||
| lsdec_04_dr_41_engl.zip | 323KB | edition 04/08 | |
| lsdec_06_dr_41_engl.zip | 247KB | edition 04/08 | |
| Sample Connections: | |||
| Light-signal decoder and DR train signals: | |||
| lsdec-dr_info_engl.zip | 516KB | edition 05/09 | |
|
|
|||
|---|---|---|---|
| LS-DEC-OEBB | A light-signal decoder for up to 4 LED lamps equipped OEBB train signals. With a self learning decoder address and an external power supply possibility. | ||
| Assembly instruction (kit): | |||
| lsdec_05_41_engl.zip | 186KB | edition 03/09 | |
| Operating instruction: | |||
| lsdec_04_oebb_41_engl.zip | 316KB | edition 04/08 | |
| lsdec_06_oebb_41_engl.zip | 268KB | edition 04/08 | |
| Sample Connections: | |||
| Light-signal decoder and OEBB train signals: | |||
| lsdec-oebb_info_engl.zip | 812KB | edition 05/09 | |
|
|
|||
|---|---|---|---|
| LS-DEC-SBB | A light-signal decoder for 2 LED lamps equippes SBB train signals with 5 or 7 lamps. With a self learning decoder address and an external power supply possibility. | ||
| Assembly instruction (kit): | |||
| lsdec_05_41_engl.zip | 186KB | edition 03/09 | |
| Operating instruction: | |||
| lsdec_04_sbb_41_engl.zip | 270KB | edition 04/08 | |
| lsdec_06_sbb_41_engl.zip | 224KB | edition 04/08 | |
| Sample Connections: | |||
| Light-signal decoder and SBB train signals: | |||
| lsdec-sbb_info_engl.zip | 697KB | edition 04/09 | |
|
|
|||
|---|---|---|---|
| LS-DEC-NS | A light-signal decoder for 4 LED lamps equipped NS train signals with 2 or 3 lamps plus speedlamp. With a self learning decoder address and an external power supply possibility. | ||
| Assembly instruction (kit): | |||
| lsdec_05_41_engl.zip | 186KB | edition 03/09 | |
| Operating instruction: | |||
| lsdec_04_ns_41_engl.zip | 312KB | edition 04/08 | |
| lsdec_06_ns_41_engl.zip | 235KB | edition 04/08 | |
| Sample Connections: | |||
| Light-signal decoder and NS train signals: | |||
| lsdec-ns_info_engl.zip | 378KB | edition 05/09 | |
|
|
|||
|---|---|---|---|
| LS-DEC-NMBS | Lightsignal-Decoder for Home Signals with 4 or 5 lamps and Shunting Signals of the National Maatschapping of the Belgian Spoorwegen (NMBS). With a self learning decoder address and an external power supply possibility. | ||
| Assembly instruction (kit): | |||
| lsdec_05_41_engl.zip | 186KB | edition 03/09 | |
| Operating instruction: | |||
| lsdec_04_nmbs_41_engl.zip | 323KB | edition 04/08 | |
| lsdec_06_nmbs_41_engl.zip | 249KB | edition 04/08 | |
|
|
|||
|---|---|---|---|
| By extending the light-signal decoder LS-DEC with Adapter-LS adapters it is possible to create realistic digital switching signals with small incandescent lamps or with light-emitting diodes which have to be operated with constant operating voltage. | |||
| Adap-LS-A | The adapter Adap-LS-A is suitable for light signals with incandescent lamps, light signals with light-emmitting diodes and incandescent lamps (e.g. OEBB-light signals of mnfg. alphamodell) or DR-light signals with light bar of mnfg. Erbert. | ||
| Assembly instruction (kit): | |||
| adap-ls-a_05_10_engl.zip | 167KB | edition 03/09 | |
| Operating instruction: | |||
| adap-ls-a_04_10_engl.zip | 270KB | edition 04/06 | |
| Adap-LS-K | The adapter Adap-LS-K is suitable for light signals with light-emitting diodes of manufacturer Besig. | ||
| Assembly instruction (kit): | |||
| adap-ls-k_05_10_engl.zip | 169KB | edition 03/09 | |
| Operating instruction: | |||
| adap-ls-k_04_10_engl.zip | 167KB | edition 04/06 | |
|
|
|||
|---|---|---|---|
| ZBM | Train influence-module for 4 stop-sections. Interrupts the drive voltage if the relative signal stays on "red". | ||
| Assembly instruction (kit): | |||
| zbm_05_engl.zip | 18KB | edition 01/07 | |
| Operating instruction: | |||
| zbm_04_engl.zip | 183KB | edition 05/06 | |
|
|
|||
|---|---|---|---|
| GBS-DEC | The Decoder for Switchboard
Lights GBS-DEC supplies current to the light emitting diodes
or to the incandescent lamps of the track switchboard panel. The GBS-DEC is available for the digital formats Märklin-Motorola and DCC as well for the s88-feedback bus. The Decoder for Switchboard Lights GBS-DEC consist of a GBS-Master Module, a GBS-Display Module and the GBS-Service Module. |
||
| Assembly instruction (kit): | |||
| gbs-master_05_12_engl.zip | 175KB | edition 03/09 | |
| Operating instruction: | |||
| gbs-master-mm_04_12_engl.zip (Märklin Motorola) | 141KB | edition 01/07 | |
| gbs-master-dc_04_12_engl.zip (DCC) | 141KB | edition 01/07 | |
| gbs-master-s88_04_12_engl.zip (s88-mode) | 336KB | edition 01/07 | |
| Assembly instruction (kit): | |||
| gbs-display_05_15_engl.zip | 191KB | edition 03/09 | |
| Operating instruction: | |||
| gbs-display_04_15_engl.zip | 394KB | edition 01/07 | |
| Assembly instruction (kit): | |||
| gbs-service_05_10_engl.zip | 25KB | edition 01/07 | |
| Operating instruction: | |||
| gbs-service_04_10_engl.zip | 116KB | edition 01/07 | |
|
|
|||
|---|---|---|---|
| TT-DEC | The TurnTable-Decoder TT-DEC is suitable for the digital control of Fleischmann-Turntable 6052, 6152, 6154, 6651, 9152, 6680 (each with and without "C"), 6652 (with 3-rail conductor), the Roco-Turntable 35900 and the Märklin-Turntable 7286. | ||
| Assembly instruction (kit): | |||
| ttdec_05_12_engl.zip | 180KB | edition 06/09 | |
| Operating instruction: | |||
| ttdec_04_12_engl.zip | 896KB | edition 09/09 | |
| DSU | Permanent-Power-Switch-Unit will change the polarity of a 2-conductor turntable bridge at every 180 degree turning of the turntable if combined with the TurnTable-Decoder TT-DEC. | ||
| Operating instruction: | |||
| dsu_04_30_engl.zip | 284KB | edition 10/08 | |
|
|
|||
|---|---|---|---|
| WD-DEC | The WatchDog decoder WD-DEC is a watch-dog for your pc supported digital model-train-railroad. The WD-DEC will stop immediately all trains during a pc or central control software crash. | ||
| Assembly instruction (kit): | |||
| wddec_05_21_engl.zip | 175KB | edition 03/09 | |
| Operating instruction: | |||
| wddec_04_21_engl.zip | 189KB | edition 05/06 | |
|
|
|||
|---|---|---|---|
| Four fold address blocks: | |||
| vierer-adressbloecke.zip | 14KB | edition 06/06 | |
|
|
|||
|---|---|---|---|
| RM-88-N | 16-fold Standard-Feedback Module (switching against ground) for s88-standard connections via 6-poles s88-pin bars or s88-N via RJ-45 sockets. | ||
| Assembly instruction (kit): | |||
| rm88n_05_10_engl.zip | 186KB | edition 03/09 | |
| Operating instruction: | |||
| rm88n_04_10_engl.zip | 323KB | edition 02/09 | |
| RM-88-N Opto | 16-fold Feedback Module with opto-coupling inputs for potential separation and for high interference protection. For s88-standard connections via 6-poles s88-pin bars or s88-N via RJ-45 sockets. | ||
| Assembly instruction (kit): | |||
| rm88no_05_10_engl.zip | 188KB | edition 03/09 | |
| Operating instruction: | |||
| rm88no_04_10_engl.zip | 354KB | edition 02/09 | |
| Sample Connections: | |||
| Sample Connections for Feedback module: | |||
| rm88_info_engl.zip | 924KB | edition 02/09 | |
|
|
|||
|---|---|---|---|
| RM-DEC-88 | A feedback module with 16 inputs (like the s88) with 75cm connection cable and original s88 connector. | ||
| Assembly instruction (kit): | |||
| rmdec_05_30_engl.zip | 14KB | edition 05/06 | |
| Operating instruction: | |||
| rmdec_04_30_engl.zip | 162KB | edition 05/06 | |
| rmdec_06_30_engl.zip | 47KB | edition 05/06 | |
| RM-DEC-88 Opto | A feedback module with 16 opto isolated inputs for the s88 feedback bus with 75cm connection cable and original s88 connector. | ||
| Assembly instruction (kit): | |||
| rmdec-o_05_21_engl.zip | 179KB | edition 03/09 | |
| Operating instruction: | |||
| rmdec-o_04_21_engl.zip | 194KB | edition 02/07 | |
| rmdec-o_06_21_engl.zip | 54KB | edition 02/07 | |
| Sample Connections: | |||
| Sample Connections for Feedback module: | |||
| rmdec_info_engl.zip | 563KB | edition 08/04 | |
| Feedback of the turnout position: | |||
| turnout_feedback.zip | 173KB | edition 08/04 | |
|
|
|||
|---|---|---|---|
| RM-GB-8-N | 8-fold Feedback Module with integrated track occupancy report for s88-standard connections via 6-poles s88-pin bars or s88-N via RJ-45 sockets. | ||
| Assembly instruction (kit): | |||
| rmgb8n_05_10_engl.zip | 201KB | edition 03/09 | |
| Operating instruction: | |||
| rmgb8n_04_10_engl.zip | 342KB | edition 05/09 | |
| Sample Connections: | |||
| Reversing loop monitoring: | |||
| kehrschleife_30_engl.zip | 1360KB | edition 02/09 | |
|
|
|||
|---|---|---|---|
| RM-GB-8 | A 8-fold feedback module with integrated occupancy detectors for the s88-feedback bus. | ||
| Assembly instruction (kit): | |||
| rmgb8_05_21_engl.zip | 17KB | edition 04/07 | |
| Operating instruction: | |||
| rmgb8_04_21_engl.zip | 80KB | edition 04/07 | |
| Sample Connections: | |||
| Reversing loop monitoring: | |||
| kehrschleife_21_engl.zip | 453KB | edition 07/05 | |
| Monitor track sections and switching voltage-free: | |||
| monitoring-switching_01_22_engl.zip | 320KB | edition 08/04 | |
|
|
|||
|---|---|---|---|
| DSW-88 | With the Data switch DSW-88 for the s88-feedback bus can be splitted into two lines at any place of the model railway layout. Several DSW-88 can be used to build one ore more feedback lines. | ||
| Assembly instruction (kit): | |||
| dsw88_05_engl.zip | 172KB | edition 03/09 | |
| Operating instruction: | |||
| dsw88_04_engl.zip | 284KB | edition 04/06 | |
|
|
|||
|---|---|---|---|
| Kabel s88 | Connection cable (0,5m, 1m or 2m) for connection of s88-feedback modules; twisted and interference protected. Including 2 original s88-plugs. | ||
| Operating instruction: | |||
| kabel_0,5m_04_engl.zip | 344KB | Stand 03/09 | |
| Operating instruction: | |||
| kabel_1m_04_engl.zip | 343KB | Stand 03/09 | |
| Operating instruction: | |||
| kabel_2m_04_engl.zip | 343KB | Stand 03/09 | |
|
|
|||
|---|---|---|---|
| RS-16-Opto | Feedback module with 16 galvanic seperated inputs (via opto coupler) for the RS-feedback bus. | ||
| AIssembly instruction (kit): | |||
| rs16_05_20_engl.zip | 174KB | edition 03/09 | |
| Operating instruction: | |||
| rs16_04_20_engl.zip | 201KB | edition 05/06 | |
| rs16_06_20_engl.zip | 81KB | edition 05/06 | |
| Sample Connections: | |||
| Sample Connections: | |||
| rs16o_info_engl.zip | 646KB | edition 08/04 | |
|
|
|||
|---|---|---|---|
| RS-8 | A 8-fold feedback module with integrated occupancy detectors. Compatible with LENZ RS-feedback bus. | ||
| Assembly instruction (kit): | |||
| rs8_05_22_engl.zip | 21KB | edition 05/06 | |
| Operating instruction: | |||
| rs8_04_22_engl.zip | 250KB | edition 10/08 | |
| Sample Connections: | |||
| Sample Connections: | |||
| rs-8_22_info_engl.zip | 575KB | edition 08/04 | |
| Reversing loop monitoring: | |||
| kehrschleife_30_engl.zip | 1360KB | edition 02/09 | |
|
|
|||
|---|---|---|---|
| DiCoStation | For the USB-Interface with the Digital Formats DCC and Märklin-Motorola plus three s88 Feedback Lines. | ||
| Instructions: | |||
| dicostation_handbuch_16_engl.zip | 1734KB | edition 06/08 | |
| ServiceTool with Firmware 1.05: | |||
| DiCoStation HSI-88.exe | 172KB | edition 03/08 | |
|
|
|||
|---|---|---|---|
| HSI-88 | High-Speed-Computer-Interface for fast feedback data transfer between the s88 modules and the PC. Three s88 bus-lines can be build. | ||
| Assembly instruction (kit): | |||
| hsi88_05_21_engl.zip | 18KB | edition 04/06 | |
| Operating instruction: | |||
| hsi88_04_21_engl.zip | 194KB | edition 04/07 | |
| Command codes: | |||
| hsi88_befehlssatz_engl.zip | 13KB | edition 06/06 | |
| Sample Connections: | |||
| Feedback acceleration at existing Märklin Digital-Systems: | |||
| hsi-88_info_engl.zip | 271KB | edition 08/04 | |
|
|
|||
|---|---|---|---|
| HSI-88-USB | Transmits the Feedback-Information from the s88-Feedback-bus without any detours directly via the digital central unit and the USB-Interface to the PC. | ||
| Instructions: | |||
| hsi88usb_handbuch_12_engl.zip | 851KB | edition 03/08 | |
| ServiceTool with Firmware 1.05: | |||
| DiCoStation HSI-88.exe | 172KB | edition 03/08 | |
| Command codes: | |||
| hsi88usb_befehlssatz_engl.zip | 21KB | edition 04/07 | |
|
|
|||
|---|---|---|---|
| DB-2 | The short-circuit proofed DigitalBooster DB-2 supplies 2,5 Ampere digital current. Connected to the digital control center via a 5-poles booster bus. The DB-2 supports the digital formats Märklin-Motorola and DCC. | ||
| Assembly instruction (kit): | |||
| db2_05_23_engl.zip | 233KB | edition 06/09 | |
| Operating instruction: | |||
| db2_04_23_engl.zip | 373KB | edition 06/09 | |
|
|
|||
|---|---|---|---|
| Adap-CDE | Operate up to ten low-cost DigitalBoosters DB-2 by each Adapter Adap-CDE on digital central units containing a DCC-Boosterbus-output (Clamp identification CDE). | ||
| Assembly instruction (kit): | |||
| adap-cde_05_10_engl.zip | 184KB | edition 03/09 | |
| Operating instruction: | |||
| adap-cde_04_10_engl.zip | 167KB | edition 07/07 | |
|
|
|||
|---|---|---|---|
| Adap-Roco | Operate up to ten low-cost DigitalBoosters DB-2 by each Adapter Adap-Roco on Roco digital central units. | ||
| Assembly instruction (kit): | |||
| adap-roco_05_11_engl.zip | 184KB | edition 03/09 | |
| Operating instruction: | |||
| adap-roco_04_11_engl.zip | 202KB | edition 05/07 | |
|
|
|||
|---|---|---|---|
| KeyCom | The KeyCommander makes a digital switching by push button of turnouts and signals on analog layouts possible. Advantage: considerable less wiring required and a better circuit identification. | ||
| Assembly instruction (kit): | |||
| keycom_05_11_engl.zip | 186KB | edition 03/09 | |
| Operating instruction: | |||
|
|
|||
| keycom-mm_04_11_engl.zip (Märklin Motorola) | 176KB | edition 11/06 | |
| keycom-dc_04_11_engl.zip (DCC) | 177KB | edition 11/06 | |
|
|
|||
| keycom-mm_06_11_engl.zip (Märklin Motorola) | 94KB | edition 11/06 | |
| keycom-dc_06_11_engl.zip (DCC) | 94KB | edition 11/06 | |
| Address assignment: | |||
| keycommander adresszuordnung.zip | 13KB | edition 06/06 | |
|
|
|||
|---|---|---|---|
| Soldering instruction: | |||
| loetanw_engl.zip | 9KB | edition 11/05 | |
|
|
|||
|---|---|---|---|
| LDT-01 | Case for LDT-decoder. Suitable for Adap-CDE, Adap-Roco, COL-10, DB-2, DiCoStation, DSW-88, GBM-8, HSI-88(-USB), KeyCom, KSM-SG, LS-DEC, RM-88-N, RM-88-N-O, RM-DEC-88, RM-DEC-88-O, S-DEC-4, SA-DEC-4, RS-16-O, TD-88, TT-DEC, WD-DEC and ZBM. | ||
| Installation instruction: | |||
| ldt-01_04_engl.zip | 223KB | edition 02/09 | |
| Device identification label: | |||
| ldt-01_beschriftung_engl.zip | 387KB | edition 06/09 | |
|
|
|||
|---|---|---|---|
| SX-GB-8 | A 8-fold feedback module with integrated occupancy detectors for the Sx-bus (Selectrix®). | ||
| Assembly instruction (kit): | |||
| sxgb8_05_11_engl.zip | 194KB | edition 03/09 | |
| Operating instruction: | |||
| sxgb8_04_11_engl.zip | 224KB | edition 05/06 | |
| Code-Table for Occupancy-Sensor-Adresses: | |||
| sx-gb-8_codiertabelle1_engl.zip | 9KB | edition 08/04 | |
| Code-Table for Release-Delay: | |||
| sx-gb-8_codiertabelle2_engl.zip | 7KB | edition 08/04 | |
|
|
|||
|---|---|---|---|
| GBM-8 | If you use the Roco-Digital-System together with the Interface 10785 and the Software Rocomotion, you can use the track occupancy detector GBM-8 as an extension of the Roco Feedback module 10787 to receive a comfortable and low-cost track occupancy report system. | ||
| Assembly instruction (kit): | |||
| gbm8_05_10_engl.zip | 14KB | edition 04/06 | |
| Operating instruction: | |||
| gbm8_04_10_engl.zip | 475KB | edition 04/09 | |
|
|
|||
|---|---|---|---|
| KSM-SG | Reverse-Loop Module KSM-SG with short circuit protected polar reversal via 2 sensor tracks. With reason to an external power supply possibility is a simple combination with feedback module with integrated track occupancy report (e.g. RM-GB-8(-N) and RS-8) possible for the control of the reverse-loop. | ||
| Assembly instruction (kit): | |||
| ksmsg_05_10_engl.zip | 178KB | edition 03/09 | |
| Operating instruction: | |||
| ksmsg_04_10_engl.zip | 424KB | edition 02/09 | |
|
|
|||
|---|---|---|---|
| Light@Night | |||
| Assembly instruction (kit): | |||
| light-interface_05_10_engl.zip | 149KB | edition 03/09 | |
| Operating instruction: | |||
| light-interface_04_10_engl.zip | 71KB | edition 03/08 | |
| Assembly instruction (kit): | |||
| gbs-display_05_15_engl.zip | 175KB | edition 03/09 | |
| Operating instruction: | |||
| light-display_04_15_engl.zip | 437KB | edition 04/06 | |
| Assembly instruction (kit): | |||
| light-power_05_11_engl.zip | 153KB | edition 03/09 | |
| Operating instruction: | |||
| light-power_04_11_engl.zip | 541KB | edition 07/06 | |
| light-at-night_timing_engl.zip | 14KB | edition 08/05 | |
| Manual for the complete software version 2.0: | |||
| LightAtNight2_engl.zip | 2139KB | edition 07/07 | |
| Kabel Light@Night | Connection cable (0,5m, 1m or 2m) for the Light-Display and the Light-Power Module if an installation distance of 0,5m, 1m or 2m is required instead of a direct connection. | ||
| Operating instruction: | |||
| kabel_0,5m_04_engl.zip | 344KB | Stand 03/09 | |
| Operating instruction: | |||
| kabel_1m_04_engl.zip | 343KB | Stand 03/09 | |
| Operating instruction: | |||
| kabel_2m_04_engl.zip | 343KB | Stand 03/09 | |
|
|
|||
|---|---|---|---|
| TD-88 | Interface for the s88-feedback bus | ||
| Assembly instruction (kit): | |||
| td88_15_22_engl.zip | 148B | edition 03/09 | |
| Operating instruction: | |||
| td88_14_22_engl.zip | 478KB | edition 10/08 | |
| INTER-10 | Serial RS232 Interface | ||
| Operating instruction: | |||
| inter10_14_13_engl.zip | 326KB | edition 10/08 | |
| COL-10 | Transponder-Reader for EM-4102 (125kHz) compartible Transponder | ||
| Assembly instruction (kit): | |||
| col10_15_14_engl.zip | 166KB | edition 03/09 | |
| Operating instruction: | |||
| col10_14_14_engl.zip | 294KB | edition 10/08 | |
| SNG-10 | Plug-In Power Supply Device for the supply to the Transponder-Reader COL-10! | ||
| Operating instruction: | |||
| sng-10_14_engl.zip | 376KB | edition 10/08 | |
|
|
|||
|---|---|---|---|
| Price list: | |||
| pl_0109_engl.zip | 223KB | edition 06/09 | |
|
|
|||
|---|---|---|---|
| Order form: | |||
| order.zip | 99KB | edition 05/09 | |
© 2009 by LDT