INTER-10 

TrainDetect:
Train number identification via serial PC-Interface (RS232)

from the Digital-Professional-Series !

The train-number identification system TrainDetect makes it possible to identify every train automatically. 

The trains have to be equipped with transponders and on strategic convenient identification locations transponder readers (order code: COL-10) have to be assembled. The flat external antenna of only 1,6mm thickness has to be assembled near the track.

INTER-10 is the interface for the serial PC-Interface. It can manage up to 99 transponder reader COL-10 and reports the train-number information directly to the PC.

The Interface INTER-10 has to be connected via the serial Interface RS232 directly to the PC. The INTER-10 can manage up to a maximum of 99 connected transponder reader COL-10.

Further sample connections for downloading can be found here!

Information about the train-number identification in accordance to the transponder method can be found here.

 

LDT-Components from the Digital-Professional-Series can operate on your digital layout without any problems. The finished module in a case comes with a 2 years limited warranty.

 

Each INTER-10 will be supplied with a detailed operation instruction.

 

The serial interface INTER-10 can be purchased as tested finished module in a case:

• Order code:

INTER-10-G (Part-No. 060823): Serial (RS232) Interface for Train-Number-Identification  as a finished module in a case.

Available ex warehouse.

---

INTER-10 software compatibility

The below table indicates which model railroad software supports the INTER-10: