KeyCom 

KeyCommander

Creates a digital switch command by a key stroke e.g. for turnout- or signal decoder!

Analogue controlled layouts required previously a considerable large effort of wiring to switch turnouts and signals. For each turnout-drive it was required to install a minimum of two wires from the drive to the turnout control key.

Thanks to the KeyCommander (KeyCom) it is now possible to use the advantage of simple wiring of a digital layout on your analogue layout.

The KeyCommander translates a key-stroke into a digital switch command (data format Märklin-Motorola or DCC). Just two wires will transmit the information to a turnout decoder installed near the turnout which will switch the turnout as required.

The key switch information will come via the 16-fold standard feedback module (RM-DEC-88) to the KeyCommander. The digital information created by the KeyCommander (KeyCom) will come via a standard digital booster (DB2) to the turnout- and signal decoder. Therefore are low-cost standard digital components in action. Those components can be eventually used for a real digital layout in future.

Further sample connection of the KeyCommander for downloading can be found here!

Each KeyCommander KeyCom will be supplied with a detailed operating- /assembly instruction.

 With the KeyCommander is it possible to switch up to 8 complete turnout drive ways by key-stroke. For each turnout drive way can be 16 digital addresses transmitted for switching turnouts or signals. For the required adjustments is it possible to adapt a ServiceModule with LCD-display and control keys to the KeyCommander.

KeyCommander with adapted ServiceModule (GBS-Service) for system adjustments.

• The KeyCommander is available as kit, as tested finished module or as tested finished module in a case for the data system format Märklin-Motorola or DCC:
  

  	kit (-B)	finished module (-F)	finished module in a case (-G)
  KeyCom-MM KeyCom-DC	each € 42,90	each € 56,90	each €59,90
  KeyCom-Startset consisting of: 1 pc. KeyCom (MM or DC) 1 pc. GBS-Service	€ 64,90	€ 89,90	€ 92,90

• Order codes:

KeyCom-MM-B (Part-No. 090301): KeyCommander for Märklin-Motorola as a kit.

KeyCom-MM-F (Part-No. 090302): KeyCommander for Märklin-Motorola as a finished module.

KeyCom-MM-G (Part-No. 090303): KeyCommander for Märklin-Motorola as a finished module in a case.

 

KeyCom-DC-B (Part-No. 090201): KeyCommander for DCC as a kit.

KeyCom-DC-F (Part-No. 090202): KeyCommander for DCC  as a finished module.

KeyCom-DC-G (Part-No. 090203): KeyCommander for DCC as a finished module in a case.

 

KeyCom-Startset-MM-B (Part-No. 090351): KeyCommander Startset for Märklin-Motorola as a kit.

KeyCom-Startset-MM-F (Part-No. 090352): KeyCommander Startset for Märklin-Motorola as a finished module.

KeyCom-Startset-MM-G (Part-No. 090353): KeyCommander Startset for Märklin-Motorola as a finished module in a case.

 

KeyCom-Startset-DC-B (Part-No. 090251): KeyCommander Startset for DCC as a kit.

KeyCom-Startset-DC-F (Part-No. 090252): KeyCommander Startset for DCC as a finished module.

KeyCom-Startset-DC-G (Part-No. 090253): KeyCommander Startset for DCC as a finished module in a case.

Available ex warehouse.

Subject to technical changes and errors.

© 2007 by LDT