KSM-SG      

Reverse-Loop Module

with short-circuit protected reversal polarity

via

Sensor Tracks

for digital operation (all formats) from the Digital-Professional-Series !

• The polarity reversal of the Reverse-Loop will be carried out without short circuit via 2 sensor tracks at the entrance and at the exit of the Reverse-Loop.

• Both rails of the sensor tracks (A1/B1 and A2/B2) and the Reverse-Loop (AK/BK) will be completely isolated and connected to the respective marked clamps at the Reverse-Loop Module KSM-SG. 

• The optimal length of the sensor tracks will be 5 to 20cm.

• The minimum length of the reverse-loop track has to be as long as the longest train on the layout.

• The Reverse-Loop Module KSM-SG can switch up to 8 Ampere digital current.

• With reason to an external power supply possibility is a simple control of the reverse-loop with track occupancy module (e.g. RM-GB-8(-N) or RS-8) possible. The sensor tracks will be controlled as well.

• Sample Connections for the Reverse-Loop Module KSM-SG for downloading can be found here!

• Components from the Digital-Professional-Series can operate on your digital layout without any problems. The finished module and the finished module in a case come with a 24 month warranty.

• Each Reverse-Loop Module KSM-SG will be supplied with a detailed Operation- or Assembly Instruction.

• You can purchase the Reverse-Loop Module KSM-SG as a kit, as tested finished module or as tested finished module in a case.

• Order codes:

KSM-SG-B (Part-No. 700501): Reverse-Loop Module as a kit.

KSM-SG-F (Part-No. 700502): Reverse-Loop Module as a finished module.
KSM-SG-G (Part-No. 700503): Reverse-Loop Module as finished module in a case.

Available ex warehouse.

Subject to technical changes and errors.
 Märklin and Motorola are registered trade marks

© 2009 by LDT