LS-DEC-DB

For light-signals of the Deutsche Bundesbahn (DB) (German Federal Railway)

Light-Signal-Decoder

for train signals equipped with LED (light emitting diodes) for the data formats Märklin-Motorola and DCC from our Digital-Professional-Series !

You can purchase the light-signal decoder LS-DEC-DB from us as a kit, as a finished module (right) or as a finished module in a case (left).

Realistic switching of light-signals via decoder-addresses:

• For the first time is it possible to switch train light-signals with our LS-DEC light-signal decoder directly by using the decoder addresses. Ideal for Memory- (IB-switch) and PC-control. No further circuitry required. The signal wiring will be simply connected to the signal module with practical and secure clamps.

• Up to two 7-aspect signals (advance- and main-signal on one common signal post) or four 2-aspect signals (e.g. block- or shunting signals) or two 3-aspect signals (e.g. main-signals) and two 2-aspect signals can be controlled by one light-signal decoder LS-DEC.

The light-signal decoder LS-DEC-DB is able of realistic control of 4 DB light-signals via decoder addresses.

Sample connection for downloading can be found here!

• Dark switching programable, if advance- and main signal are arranged on one common signal post.

• Signal aspects will not simply be cross faded but as realistic the prior aspect will be firstly dimmed and after a short dark phase the new signal aspect will appear. The light emitting diodes will be dimmed up and down during this process.

above: conventional signal change by simple switching on and off.
below: realistic signal change with dim- and dark phase with the light-signal decoder LS-DEC.

• With integrated series resistor for the light emitting diodes.

• Suitable for all LED light-signals with common anode or common cathode.

• In case you want to use light signals with incandescent lamps or light signals with light emitting diodes of company Besig (with constant working voltage) you can extend the light signal decoder LS-DEC-DB simply with our Adapter Adap-LS.

• The signal current has not necessarily to be supplied by a booster but can be directly feeded into a separate input from a model railroad transformer. This saves expensive digital current.

• By using a connector plug you can choose if you want to operate the decoder on a Märklin-Motorola system or on a digital system with the DCC Standard.

• Decoder of the Digital-Professional-Series can be used on your digital system without any problems because they are compatible to the Märklin-Motorola-Dataformat respectively to the DCC Standard.
  You will get a 24 month warranty on the finished modules and on the finished modules in a case.

• Each decoder LS-DEC-DB will be supplied with a detailed operating- /respectively assembly-instruction. Additionally to the Operating Instruction please load the file "lsdec-db_info" onto your PC. Within this info-file you will find detailed tips and various hints for the digital operation of DB-light signals.

• You can purchase the light-signal decoder as a kit, as tested finished module or as tested finished module in a case. Suitable assembly material for the kit or the finished module is available under Accessories.
   

  	kit (- B)	finished module (- F)	finished module in a case (- G)
  LS-DEC-DB	€ 38,90	€ 49,50	€ 52,90

• Order codes:

LS-DEC-DB-B (Part-No. 512011): Light-signal decoder for DB-Signals as a kit.

LS-DEC-DB-F (Part-No. 512012): Light-signal decoder for DB-Signals as a finished module.

LS-DEC-DB-G (Part-No. 512013): Light-signal decoder for DB-Signals as a finished module in a case.

( All decoders are suitable for Märklin-Motorola and DCC digital-model rail roads.)

Subject to technical changes and errors.
 Märklin and Motorola are registered trade marks

© 2007 by LDT