Littfinski DatenTechnik (LDT) - Become a Digital-Professional!

LS-DEC-NMBS

For light signals of the Nationale Maatschapping of the Belgian Spoorwegen (NMBS)

Light-Signal-Decoder

for signals equiped with LED (light emmitting diodes) for the data formats Märklin-Motorola and DCC from our Digital-Professional-Series !

The light-signal decoder LS-DEC-NMBS can perform a realistic control of up to 4 signals of the Nationale Maatschapping of the Belgian Spoorwegen (NMBS).

Realistic switching of light-signals via decoder addresses:

For the first time is it possible to switch train light-signals with our LS-DEC light-signal decoder directly by using the decoder addresses. Ideal for Memory- (IB-switch) und PC-control. No further circuitry required. The signal wiring is simply connected to the signal module with practical and secure clamps.

With just one light-signal decoder LS-DEC-NMBS is it possible to control up to four main signals (two signals with 5 and two signals with 4 lamps) or four shunting signals.

Sample connection for downloading can be found here!

Signal aspects will not simply be cross faded but as realistic the prior aspect will be firstly dimmed and after a short dark phase the new signal aspect will appear. The light emitting diodes will be dimmed up and down during this process.

above: conventional signal change by simple switching.
below: realistic signal change with dim- and dark phase with the light-signal decoder LS-DEC.

With integrated series resistor for the light emitting diodes.

Suitable for all LED-light signals with common anode or common cathode.

The signal current has not necessarily to be supplied by a booster but can be directly fed into a separate input from a model railroad transformer. This saves expensive digital current.

By using a connector plug you can choose if you want to operate the decoder on a Märklin-Motorola system or on a digital system with DCC Standard.

Decoder of the Digital-Professional-Series can be used on your digital system without any problems because they are compatible to the Märklin-Motorola-Dataformat respectively to the DCC Standard.
You will get a 24-month warranty on the finished modules and on the finished modules in a case.

Each decoder LS-DEC-NMBS will be supplied with a detailed Operating- respectively Assembly Instruction. Additionally to the Operating Instruction please load the file "LS-DEC-NMBS_xxx_yy_engl" from our "Digital-Compendium" onto your PC. Within this info-file you will find detailed tips and various hints for the digital operation of NMBS-light signals.

You can purchase the light-signal decoder as a kit, as tested finished module or as tested finished module in a case. Suitable assembly material for the kit or the finished module is available under Accessories.

	kit (-B)	finished module (-F)	finished module in a case (-G)
LS-DEC-NMBS	€ 42,90	€ 53,50	€ 56,90

Order codes:

LS-DEC-NMBS-B (Part-No. 518011): Light signal decoder for NMBS-Signals as a kit.

LS-DEC-NMBS-F (Part-No. 518012): Light-signal decoder for NMBS-Signals as a finished module.

LS-DEC-NMBS-G (Part-No. 518013): Light-signal decoder for NMBS-Signals as a finished module in a case.

( All decoders are suitable for Märklin-Motorola and DCC digital-model rail roads.)

Subject to technical changes and errors.
Märklin and Motorola are registered trade marks