LS-DEC-NS

For light signals of the Nederlandse Spoorwegen  (NS)

Light-Signal-Decoder

for NS train signals equiped with LED (light emmitting diodes) for the data formats Märklin-Motorola and DCC from our Digital-Professional-Series !

The light-signal decoder LS-DEC-NS can perform a realistic control of up to 4 signals of the Nederlandse Spoorwegen (NS).

Realistic switching of light-signals via decoder addresses:

• For the first time is it possible to switch train light-signals with our LS-DEC light-signal decoder directly by using the decoder addresses. Ideal for Memory- (IB-switch) und PC-control. No further circuitry required. The signal wiring is simply connected to the signal module with practical and secure clamps.

• Up to four 3-aspect signals can be controlled by one light-signal decoder LS-DEC-NS. Is there a indicator sign installed this signal will lighten by slow proceed aspect as well.

• The signal lamps will be switched realistic from STOP (red) to PROCEED (green) via the aspect SLOW PROCEED (yellow).

Sample connection for downloading can be found here!

• Signal aspects will not simply be cross faded but as realistic the prior aspect will be firstly dimmed and after a short dark phase the new signal aspect will appear. The light emitting diodes will be dimmed up and down during this process.

above: conventional signal change by simple switching.
below: realistic signal change with dim- and dark phase with the light-signal decoder LS-DEC.

• With integrated series resistor for the light emitting diodes.

• Suitable for all LED-light signals with common anode or common cathode.

• The signal current has not necessarily to be supplied by a booster but can be directly fed into a separate input from a model railroad transformer. This saves expensive digital current.

• By using a connector plug you can choose if you want to operate the decoder on a Märklin-Motorola system or on a digital system with DCC Standard.

• Decoder of the Digital-Professional-Series can be used on your digital system without any problems because they are compatible to the Märklin-Motorola-Dataformat respectively to the DCC Standard.
  You will get a 24 month warranty on the finished modules and on the finished modules in a case.

• Each decoder LS-DEC-NS will be supplied with a detailed Operating- respectively Assembly Instruction. Additionally to the Operating Instruction please load the file "lsdec-ns_info" onto your PC. Within this info-file you will find detailed tips and various hints for the digital operation of NS-light signals.

• You can purchase the light-signal decoder as a kit, as tested finished module or as tested finished module in a case. Suitable assembly material for the kit or the finished module is available under Accessories.

• Order codes:

LS-DEC-NS-B (Part-No. 515011): Light signal decoder for NS-Signals as a kit.

LS-DEC-NS-F (Part-No. 515012): Light-signal decoder for NS-Signals as a finished module.

LS-DEC-NS-G (Part-No. 515013): Light-signal decoder for NS-Signals as a finished module in a case.

( All decoders are suitable for Märklin-Motorola and DCC digital-model rail roads.)

Subject to technical changes and errors.
 Märklin and Motorola are registered trade marks

© 2007 by LDT