 |
 |
|
LDT-digital components for Roco digital model railroads :
|
|
|
|
4-fold turnout decoder | accessories | 4-fold switch decoder | 4-fold decoder for motor driven turnouts | 4-fold light signal decoder | adapter for light signal decoder | 4-fold train influence module | 8-fold track occupancy detector for the Roco Feedbackmodule 10787 | decoder for switchboard lights | high-speed-interface | Boosteradapter Adap-Roco | DigitalBooster | accessories for our products
|
|||||
|
|
4-fold turnout decoder with a self learning decoder address and external power supply possibility. Turnouts can now also be shifted with the function keys F1 to F4 of loc-addresses (e.g. Lokmaus 2® or R2® of Roco)! | ||||
| S-DEC-4-DC-B | as a kit: | 21,90 € | |||
| S-DEC-4-DC-F | as a finished module: | 29,50 € | |||
| S-DEC-4-DC-G | as a finished module in a case: | 32,90 € | |||
|
|
4-fold turnout decoder for LGB-drives EPL 12010 and KATO-drives with a self learning address. Turnouts can now also be shifted with the function keys F1 to F4 of loc-addresses (e.g. Lokmaus 2® or R3® of Roco)! | ||||
| 1-DEC-DC-B | as a kit: | 35,50 € | |||
| 1-DEC-DC | as a finished module: | 48,50 € | |||
|
|||||
| Permanent-Power-Switch-Unit with bistable relay for switching lights up to 4A. Can be connected to any output of the decoder series QS-DEC or S-DEC-4. Will change the polarity of a 2-conductor turntable bridge at every 180 degree turning of the turntable if combined with the TurnTable-Decoder TT-DEC. | |||||
| DSU | as a finished module: |
9,90 € |
|||
|
|||||
| A 4-fold switch decoder (like the k84) but with a self learning decoder address and an external power supply possibility. | |||||
| SA-DEC-4-DC-B | as a kit: | 29,50 € | |||
| SA-DEC-4-DC-F | as a finished module: | 36,90 € | |||
| SA-DEC-4-DC-G | as a finished module in a case: | 40,30 € | |||
|
|||||
| A 4-fold decoder for motor driven turnouts (like the LS110 plus 4* adapter LA010) with self learning decoder address and an external power supply possibility: | |||||
| M-DEC-DC-B | as a kit: | 35,50 € | |||
| M-DEC-DC | as a finished module: | 48,50 € | |||
|
|||||
|
|
A light signal decoder for 4 LED lamps equipped DB and SBB train signals. With a self learning decoder address and an external power supply possibility. | ||||
| LS-DEC-DB-B | as a kit: | 38,90 € | |||
| LS-DEC-DB-F | as a finished module: | 49,50 € | |||
| LS-DEC-DB-G | as a finished module in a case: | 52,90 € | |||
|
|
A light signal decoder for up to 4 LED lamps equipped DR train signals. With a self learning decoder address and an external power supply possibility. | ||||
| LS-DEC-DR-B | as a kit: | 42,90 € | |||
| LS-DEC-DR-F | as a finished module: | 53,50 € | |||
| LS-DEC-DR-G | as a finished module in a case: | 56,90 € | |||
|
|
A light signal decoder for up to 4 LED lamps equipped OEBB train signals. With a self learning decoder address and an external power supply possibility. | ||||
| LS-DEC-OEBB-B | as a kit: | 42,90 € | |||
| LS-DEC-OEBB-F | as a finished module: | 53,50 € | |||
| LS-DEC-OEBB-G | as a finished module in a case: | 56,90 € | |||
|
|
A light signal decoder for 2 LED lamps equipped SBB train signals with 5 or 7 lamps. With a self learning decoder address and an external power supply possibility. | ||||
| LS-DEC-SBB-B | as a kit: | 42,90 € | |||
| LS-DEC-SBB-F | as a finished module: | 53,50 € | |||
| LS-DEC-SBB-G | as a finished module in a case: | 56,90 € | |||
|
|
A light signal decoder for 4 LED lamps equipped NS train signals with 2 or 3 lamps plus speedlamp. With a self learning decoder address and an external power supply possibility. | ||||
| LS-DEC-NS-B | as a kit: | 42,90 € | |||
| LS-DEC-NS-F | as a finished module: | 53,50 € | |||
| LS-DEC-NS-G | as a finished module in a case: |
56,90 € |
|||
|
|
A light signal decoder for home signals with 4 or 5 lamps and shunting signals of the National Maatschapping of the Belgian Spoorwegen (NMBS). With a self learning decoder address and an external power supply possibility. | ||||
| LS-DEC-NMBS-B | as a kit: | 42,90 € | |||
| LS-DEC-NMBS-F | as a finished module: | 53,50 € | |||
| LS-DEC-NMBS-G | as a finished module in a case: | 56,90 € | |||
|
|||||
|
|
By extending the light signal decoder LS-DEC with Adap-LS adapters it is possible of realistic digital switching signals with small incandescent lamps or with light-emitting diodes which have to be operated with constant operating voltage. | ||||
|
|
The adapter Adap-LS-A is suitable for light signals with incandescent lamps, light signals with light-emmitting diodes and incandescent lamps (e.g. OEBB-light signals of mnfg. alphamodell) or DR-light signals with light bar of mnfg. Erbert. | ||||
| Adap-LS-A-B | as a kit: (2 pieces) | 16,90 € | |||
| Adap-LS-A | as a finished module: (2 pieces) | 25,90 € | |||
|
|
The adapter Adap-LS-K is suitable for light signals with light-emitting diodes of manufacturer Besig. | ||||
| Adap-LS-K-B | as a kit: (2 pieces) | 20,90 € | |||
| Adap-LS-K | as a finished module: (2 pieces) | 31,50 € | |||
|
|||||
| A 4-fold train influence module to be combined with LDT light signal decoder LS-DEC. Cut off power supply when signal on red. | |||||
| ZBM-B | as a kit: | 32,90 € | |||
| ZBM-F | as a finished module: | 38,50 € | |||
| ZBM-G | as a finished module in a case: | 41,90 € | |||
|
|||||
|
|
If you use Roco-Digital together with Interface and Software (Rocomotion), you can use the GBM-8 as an extension of the Roco Feedbackmodule 10787 to receive a comfortable and low-cost track occupancy report system. | ||||
| GBM-8-B | as a kit: | 22,90 € | |||
| GBM-8-F | as a finished module: | 36,50 € | |||
| GBM-8-G | as a finished module in a case: | 39,90 € | |||
|
|||||
|
|
The Decoder for Switchboard Lights GBS-DEC supplies current to the
light emitting diodes or to the incandescent lamps of the track switchboard
panel.
The GBS-DEC is available for the digital formats Märklin-Motorola and DCC as well for the s88-feedback bus. The Decoder for Switchboard Lights GBS-DEC consist of a GBS-Master Module, a GBS-Display Module and the GBS-Service Module. |
||||
| GBS-Master-DC-B | as a kit: | 49,90 € | |||
| GBS-Master-DC | as a finished module: | 75,90 € | |||
| GBS-Master-s88-B | as a kit: (suitable if HSI-88 used for feedback) | 49,90 € | |||
| GBS-Master-s88 | as a finished module: (suitable if HSI-88 used for feedback) | 75,90 € | |||
| GBS-Display-B | as a kit: | 59,90 € | |||
| GBS-Display | as a finished module: | 79,90 € | |||
| GBS-Service-B | as a kit: | 26,90 € | |||
| GBS-Service | as a finished module: | 39,90 € | |||
|
|
GBS-Startset: Consisting of: 1 piece GBS-Master, 1 piece GBS-Display and 1 piece GBS-Service. | ||||
| GBS-Startset-DC-B | as a kit: | 129,90 € | |||
| GBS-Startset-DC | as a finished module: | 184,90 € | |||
| GBS-Startset-s88-B | as a kit: | 129,90 € | |||
| GBS-Startset-s88 | as a finished module: | 184,90 € | |||
|
|||||
| High-Speed-Computer-Interface for fast report of s88 feedback modules to the PC via the COM-interface (HSI-88-X) or the USB-interface (HSI-88-USB-G). It can be build three s88-bus lines. | |||||
| HSI-88-B | as a kit: | 69,90 € | |||
| HSI-88-F | as a finished module: | 91,10 € | |||
| HSI-88-G | as a finished module in a case: | 94,50 € | |||
| HSI-88-USB-G | as a finished module in a case: | 124,90 € | |||
|
|||||
|
|
If you want to use our low-cost DigitalBooster DB-2 as well on a Roco-digital central unit 10761 or 10764 you can apply now the Adapter Adap-Roco. Up to 10 DigitalBoosters DB-2 can be connected to each Adapter Adap-Roco. |
||||
| Adap-Roco-B | as a kit: | 19,90 € | |||
| Adap-Roco-F | as a finished module: | 29,90 € | |||
| Adap-Roco-G | as a finished module in a case: | 32,90 € | |||
|
|||||
|
|
The short-circuit proof DigitalBooster DB-2 supplies 2,5 Ampere digital current. Connected to the digital control center via a 5-poles booster bus. The DB-2 supports the digital formats Märklin-Motorola and DCC. | ||||
| DB-2-B | as a kit: | 44,90 € | |||
| DB-2-F | as a finished module: | 66,90 € | |||
| DB-2-G | as a finished module in a case: | 69,90 € | |||
|
|||||
| MON-SET | Assembly kit for fitting devices under the layout we supply suitable installation material consisting of four spacers each 5mm long and four 13mm screws. | 0,90 € | |||
| LDT-01 | Case for LDT-decoder. Suitable for COL-10, DB-2, DSW-88, GBM-8, HSI-88, KeyCom, LS-DEC, RM-DEC-88, RM-DEC-88-O, S-DEC-4, SA-DEC-4, RS-16-O, TD-88, TT-DEC, WD-DEC and ZBM. | 4,10 € | |||
| G-1-DEC | Splash-water protected housing for the turnout decoder 1-DEC-DC. | 15,90 € | |||
© 2008 by LDT
Functional
extension!