LDT-digital components for the TWIN-CENTER:

DCC-Logo Twin-Center LDT-Decoder sind multiprotokollfähig. Sie arbeiten auch in mehrsprachiger Umgebung, wie z.B. an der Intellibox und am Twin-Center.

4-fold turnout decoder  |  accessories  |   4-fold switch decoder  |   4-fold decoder for motor driven turnouts  |  4-fold light signal decoder  adapter for light signal decoder  |  4-fold train influence module  |  decoder for switchboard lights  |  Turntable decoder  |  WatchDog decoder  |  16-fold feedback module for the s88 feedback bus  8-fold feedback module with integrated occupancy detectors for the s88-feedback bus  data switch for the s88-feedback bus  |  accessories  high-speed-interface  digitalbooster  |   accessories for boosters  |  accessories for our products

Aufzählung 4-fold turnout decoder
  A 4-fold turnout decoder (like the S4, k87N  or LS110) but with a self learning decoder address. With  an external power supply possibility.
 S-DEC-4-DC-B as a kit:   21,90 €
 S-DEC-4-DC-F as a finished module:   29,50 €
 S-DEC-4-DC-G as a finished module in a case: 32,90 €
       
  A 4-fold decoder for single coil turnouts (LGB-Drive EPL 12010 and KATO-Drive) with a self learning decoder address.
 1-DEC-DC-B as a kit:   35,50 €
 1-DEC-DC as a finished module:   48,50 €
     

 top

Aufzählung Permanent Power Switch Unit: for Turnout-Decoder and TurnTable-Decoder
  Permanent-Power-Switch-Unit with bistable relay for switching lights up to 4A. Can be connected to any output of the decoder series QS-DEC or S-DEC-4. Will change the polarity of a 2-conductor turntable bridge at every 180 degree turning of the turntable if combined with the TurnTable-Decoder TT-DEC.
 DSU as a finished module:  

9,90 €

     

  top

Aufzählung 4-fold switch decoder
  A 4-fold switch decoder (like the k84) but with a self learning decoder address and an external power supply possibility.
 SA-DEC-4-DC-B as a kit: 29,50 €
 SA-DEC-4-DC-F as a finished module:   36,90 €
 SA-DEC-4-DC-G as a finished module in a case:   40,30 €

 top

Aufzählung 4-fold decoder for motor driven turnouts
  A 4-fold decoder for motor driven turnouts (like the LS110 plus 4* adapter LA010) with self learning decoder address and an external power supply possibility:
 M-DEC-DC-B as a kit: 35,50 €
 M-DEC-DC as a finished module:   48,50 €

 top

Aufzählung 4-fold light signal decoder

    

A light signal decoder for 4 LED lamps equipped DB and SBB train signals. With a self learning decoder address and an external power supply possibility.
 LS-DEC-DB-B as a kit: 38,90 €
 LS-DEC-DB-F as a finished module: 49,50 €
 LS-DEC-DB-G as a finished module in a case:  52,90 €
   

 

A light signal decoder for up to 4 LED lamps equipped DR train signals. With a self learning decoder address and an external power supply possibility.
 LS-DEC-DR-B as a kit: 42,90 €
 LS-DEC-DR-F as a finished module: 53,50 €
 LS-DEC-DR-G as a finished module in a case: 56,90 €
   

Digital-Neuheit von LDT: Lichtsignal-Decoder.

A light signal decoder for up to 4 LED lamps equipped OEBB train signals. With a self learning decoder address and an external power supply possibility.
 LS-DEC-OEBB-B as a kit: 42,90 €
 LS-DEC-OEBB-F as a finished module: 53,50 €
 LS-DEC-OEBB-G as a finished module in a case: 56,90 €
   

 

A light signal decoder for 2 LED lamps equipped SBB train signals with 5 or 7 lamps. With a self learning decoder address and an external power supply possibility.
 LS-DEC-SBB-B as a kit: 42,90 €
 LS-DEC-SBB-F as a finished module: 53,50 €
 LS-DEC-SBB-G as a finished module in a case: 56,90 €
   

 

A light signal decoder for 4 LED lamps equipped NS train signals with 2 or 3 lamps plus speedlamp. With a self learning decoder address and an external power supply possibility.
 LS-DEC-NS-B as a kit: 42,90 €
 LS-DEC-NS-F as a finished module: 53,50 €
 LS-DEC-NS-G as a finished module in a case:

56,90 €

Digital-Neuheit von LDT: Lichtsignal-Decoder.

A light signal decoder for home signals with 4 or 5 lamps and shunting signals of the National Maatschapping of the Belgian Spoorwegen (NMBS). With a self learning decoder address and an external power supply possibility.
 LS-DEC-NMBS-B as a kit: 42,90 €
 LS-DEC-NMBS-F as a finished module: 53,50 €
 LS-DEC-NMBS-G as a finished module in a case: 56,90 €

 top

Aufzählung Adapter for light signal decoder

 

By extending the light signal decoder LS-DEC with Adap-LS adapters it is  possible of realistic digital switching signals with small incandescent lamps or with light-emitting diodes which have to be operated with constant operating voltage.

 

The adapter Adap-LS-A is suitable for light signals with incandescent lamps, light signals with light-emmitting diodes and incandescent lamps (e.g. OEBB-light signals of mnfg. alphamodell) or DR-light signals with light bar of mnfg. Erbert.
 Adap-LS-A-B as a kit: (2 pieces) 16,90 €
 Adap-LS-A as a finished module: (2 pieces) 25,90 €
   

 

The adapter Adap-LS-K is suitable for light signals with light-emitting diodes of manufacturer Besig.
 Adap-LS-K-B as a kit: (2 pieces) 20,90 €
 Adap-LS-K as a finished module: (2 pieces)   31,50 €

 top

Aufzählung 4-fold train influence module for light signal decoder
  A 4-fold train influence module to be combined with LDT light signal decoder LS-DEC. Cut off power supply when signal on red.
 ZBM-B as a kit: 32,90 €
 ZBM-F as a finished module: 38,50 €
 ZBM-G as a finished module in a case: 41,90 €

 top

Aufzählung Decoder for Switchboard Lights (GBS-DEC)

 

The Decoder for Switchboard Lights GBS-DEC supplies current to the light emitting diodes or to the incandescent lamps of the track switchboard panel.
The GBS-DEC is available for the digital formats Märklin-Motorola and DCC as well for the s88-feedback bus. The Decoder for Switchboard Lights GBS-DEC consist of a GBS-Master Module, a GBS-Display Module and the GBS-Service Module.
 GBS-Master-DC-B as a kit: 49,90 €
 GBS-Master-DC as a finished module: 75,90 €
   
 GBS-Master-s88-B as a kit: 49,90 €
 GBS-Master-s88 as a finished module: 75,90 €
   
 GBS-Display-B as a kit: 59,90 €
 GBS-Display as a finished module: 79,90 €
   
 GBS-Service-B as a kit: 26,90 €
 GBS-Service as a finished module: 39,90 €
   

 

GBS-Startset: Consisting of: 1 piece GBS-Master, 1 piece GBS-Display and 1 piece GBS-Service.
 GBS-Startset-DC-B as a kit: 129,90 €
 GBS-Startset-DC as a finished module: 184,90 €
   
 GBS-Startset-s88-B as a kit: 129,90 €
 GBS-Startset-s88 as a finished module: 184,90 €

 top

Aufzählung Turntable decoder TT-DEC

 Digital-Neuheit von LDT: Lichtsignal-Decoder.

The Turntable-Decoder TT-DEC is suitable for the digital control of Fleischmann-Turntable 6052C, 6152C, 6154C, 6651C, 9152, 9152C, 6680C and the Märklin-Turntable 7286.
 TT-DEC-B as kit: 64,90 €
 TT-DEC-F as a finished module: 85,50 €
 TT-DEC-G as a finished module in a case: 88,90 €

 top

Aufzählung WatchDog decoder WD-DEC

 

The WatchDog decoder WD-DEC is a watch-dog for your pc supported digital model-train-railroad. The WD-DEC will stop immediately all trains during a pc or central control software crash.
 WD-DEC-B as kit: 50,50 €
 WD-DEC-F as a finished module: 65,50 €
 WD-DEC-G as a finished module in a case: 68,90 €

 top

Aufzählung 16-fold feedback module for the s88 feedback bus
  A feedback module with 16 inputs (like the s88) with 75cm connection cable and original s88 connector.
 RM-DEC-88-B as a kit: 26,50 €
 RM-DEC-88-F as a finished module: 33,50 €
 RM-DEC-88-G as a finished module in a case: 36,90 €
   
  A feedback module with 16 opto isolated inputs for the s88 feedback bus with 75cm connection cable and original s88 connector.
 RM-DEC-88-O-B as a kit: 37,90 €
 RM-DEC-88-O-F as a finished module: 48,50 €
 RM-DEC-88-O-G as a finished module in a case:   51,90 €

 top

Aufzählung 8-fold feedback module with integrated occupancy detectors for the s88-feedback bus

 

A 8-fold feedback module with integrated occupancy detectors. Compatible with the s88-feedback bus.
 RM-GB-8-B as a kit: 46,90 €
 RM-GB-8 as a finished module:   59,90 €

 top

Aufzählung data switch for the s88-feedback bus

 

Data switch to split the s88 feedback bus. With the data switch DSW-88 the s88 feedback bus can be ramified at any position on the track.
 DSW-88-B as a kit:    29,50 €
 DSW-88-F as a finished module:    40,90 €
 DSW-88-G as a finished module in a case:  44,30 €

top

Aufzählung accessories for connecting s88 modules
 Kabel s88 2m Extension cable for connection of s88-feedback modules, twisted and interference protected. Including 2 original s88-plugs. Lenght 2m.

9,50 €

 Kabel s88 0,5m Extension cable for connection of s88-feedback modules, twisted and interference protected. Including 2 original s88-plugs. Lenght 0,5m.

5,50 €

 top

Aufzählung high-speed-interface for the s88-feedbackbus
  High-Speed-Computer-Interface for fast report of s88 feedback modules to the PC via the COM-interface (HSI-88-X) or the USB-interface (HSI-88-USB-G). It can be build three s88-bus lines.
 HSI-88-B  as a kit:   69,90 €
 HSI-88-F as a  finished module:   91,10 €
 HSI-88-G as a finished module in a case:   94,50 €
 HSI-88-USB-G as a finished module in a case:   124,90

 top

Aufzählung DigitalBooster for the data formats Märklin-Motorola and DCC

 

The short-circuit proof DigitalBooster DB-2 supplies 2,5 Ampere digital current. Connected to the digital control center via a 5-poles booster bus. The DB-2 supports the digital formats Märklin-Motorola and DCC.
 DB-2-B as a kit: 44,90 €
 DB-2-F as a  finished module:   66,90 €
 DB-2-G as a finished module in a case: 69,90 €

top

Aufzählung accessories for digital control units and boosters
  Kabel Booster 5-poles booster bus cable with twisted wires and therefore interference protected for the connection of digital control units (e.g. Control Unit, Intellibox, TWIN-CENTER) with boosters (e.g. 6015 / 6017, Power 3, TWIN-BOOSTER, DB-2) and for connecting boosters to each other. Each DigitalBooster DB-2 will be suplied with one Kabel Booster.
 Length 100cm.
6,90 €

 top

Aufzählung accessories for our products
 MON-SET Assembly kit for fitting devices under the layout we supply suitable installation material consisting of four spacers each 5mm long and four 13mm screws. 0,90 €
 LDT-01 Case for LDT-decoder. Suitable for  COL-10, DB-2, DSW-88, GBM-8, HSI-88, KeyCom, LS-DEC, RM-DEC-88, RM-DEC-88-O, S-DEC-4, SA-DEC-4, RS-16-O, TD-88, TT-DEC, WD-DEC and ZBM. 4,10 €
 G-1-DEC Splash-water protected housing for the turnout decoder 1-DEC-DC. 15,90 €

 top

© 2008 by LDT