RM-88-N      

16-fold Standard-Feedback Module

for the s88-feedback bus for s88-standard connection and RJ-45 sockets in accordance to

from the Digital-Professional-Series !

The feedback module RM-88-N is equipped for s88-standard connections with 6-poles pin bars and for bus connections
according to with screened  RJ-45 sockets.

• For the connection to command stations and interfaces, which supports the s88-feedback bus: e.g. Märklin Interface (up to 31 units), Märklin Memory (up to 3 units), Central Station 1 and 2 (up to 31 units), Intellibox / TWIN-CENTER (up to 31 units), EasyControl (up to 31 units),  ECoS (up to 31 units), Commander (up to 31 units), HSI-88(-USB) (up to 31 units) and DiCoStation (up to 31 units).

• The feedback RM-88-N contains 16 inputs, which are switching against ground (as Märklin s88).

• Simple and safe connection of switch rails, contact rails, occupancy sensors and reed contacts etc. via screw clamps.

• The feedback module RM-88-N is suitable for s88-standard connections with 6-poles pin bars and for bus connections according to  equipped with screened RJ-45 sockets. Additional information about the standard which will be supported by other manufacturers as well can be found here: http://www.s88-N.eu.

• If the screening of the bus connections in accordance torequires a connection to the layout ground is it possible to solder a grounded cable to the metal housing of a RJ-45 socket. 

  

• The feedback module RM-88-N can be combined as required with the feedback module RM-88-N-O, RM-GB-8-N and RM-DEC-88 / RM-DEC-88-O / RM-GB-8 with the s88-feedback module from Märklin and other suppliers.

• The unit is available as ready to use finished module, as finished module in a case or as kit on a 86*76 mm printed circuit board with four fastening bores. (an empty case LDT-01 for kits and suitable assembly material can be found under Accessory).

• The feedback module RM-88-N from the Digital-Professional-Series can be operated without any problem on your digital controlled layout because it is 100% compatible to the s88-feedback bus. The finished module and the finished module in a case comes with a 24 month warranty.

• Each feedback module will be supplied with a detailed operating-/ assembly instruction.

• Sample connections for RM-88-N can be found here and at the file RM88_INFO_engl!

• The feedback modules are available as kit, as tested finished module or as tested finished module in a case:

• Order Codes:

  RM-88-N-B (Part No. 310111): 16-fold Feedback Module as kit.

  RM-88-N-F (Part No. 310112): 16-fold Feedback Module as finished module.

  RM-88-N-G (Part No. 310113): 16-fold Feedback Module as finished module in a case.

  Available ex warehouse.

  ---

To assure a good connection:

s88-Bus Cable!

• The feedback module RM-88-N will be supplied without s88-bus cable. Please select a suitable bus cable (length and style) at the following table. For the s88-standard connection we supply an interference protected, twisted s88-bus cable with original s88-plugs at length of 0,5m, 1m and 2m. s88-standard connections are always required for the connection of the first feedback module to the command station or interface.
• We offer for s88-bus connections in accordance to a blue screened patch cable with RJ-45 plugs at four different length of 0,5 to 3m.
• The feedback module RM-88-N, RM-88-N-O and RM-GB-8-N can be connected between each other either via s88-standard connection "Kabel s88" or via "Kabel Patch" according to.

s88-standard connection in direction of command station or interface (left) and to the next feedback module (right).	s88-standard connection in direction of command station or interface (left) and via to the next feedback module (right).
Bus connection to the prior feedback module via in direction of the command station or interface (left) and s88-standard connection to the next feedback module (right).	Bus connection to the prior feedback module in direction of the command station or interface (left) and to  the next feedback module (right) via .

s88-standard connection with 2 original s88-plugs, gray cable, twisted, round. Plus pin bar for bus extension.
Kabel s88 0,5m	€ 5,50
Kabel s88 1m	€ 7,50
Kabel s88 2m	€ 9,50
s88-connection according to with 2 RJ-45 plugs, blue cable, screened.
Kabel Patch 0,5m	€ 2,50
Kabel Patch 1m	€ 3,40
Kabel Patch 2m	€ 4,80
Kabel Patch 3m	€ 6,80

• Order Codes:

  Kabel s88 0,5m (Part No. 000102): With original s88-plugs, gray cable, twisted, round.

  Kabel s88 1m (Part No. 000106): With original s88-plugs, gray cable, twisted, round.

  Kabel s88 2m (Part No. 000101): With original s88-plugs, gray cable, twisted, round.

   

  Kabel Patch 0,5m (Part No. 000130): With RJ-45 plugs, blue, screened.

  Kabel Patch 1m (Part No. 000131): With RJ-45 plugs, blue, screened.

  Kabel Patch 2m (Part No. 000132): With RJ-45 plugs, blue, screened.

  Kabel Patch 3m (Part No. 000133): With RJ-45 plugs, blue, screened.

Available ex warehouse.

Subject to technical changes and errors.
Märklin und Arnold are registered trade marks.

© 2011 by LDT