RM-88-N-O      

16-fold Feedback Module

mit galvanic separated

Opto-coupling-Inputs

for the s88-feedback bus for s88-standard connections and RJ-45 sockets in accordance to from the

 Digital-Professional-Serie !

The feedback module RM-88-N-O is suitable for s88-standard connections with 6-poles pin bars
and for bus-connections according to  equipped with screened RJ-45 sockets.

• For the connection to command stations and interfaces, which supports the s88-feedback bus: i.g Märklin Interface (up to 31 units), Märklin Memory (up to 3 units), Central Station 1 and 2 (up to 31 units), Intellibox / TWIN-CENTER (up to 31 units), EasyControl (up to 31 units),  ECoS (up to 31 units), Commander (up to 31 units), HSI-88(-USB) (up to 31 units) and DiCoStation (up to 31 units).

• The feedback module RM-88-N-O contains 16 opto-coupling-inputs for the potential separation and high interference protection.

• Simple and safe connection of switch-rails, contact-rails, occupancy sensors and reed-contacts etc. via screw clamps.

• The feedback module RM-88-N-O is suitable for s88-standard connections with 6-poles pin bars and for bus connections according to equipped with screened RJ-45 sockets. Additional information about the standard which will be supported by other manufacturers as well can be found here: http://www.s88-N.eu.

• If the screening of the bus connections in accordance torequires a connection to the layout ground is it possible to solder a grounded cable to the metal housing of a RJ-45 socket. 

  

• The feedback module RM-88-N-O can be combined as required with the feedback module RM-88-N, RM-GB-8-N and RM-DEC-88 / RM-DEC-88-O / RM-GB-8 with the s88-feedback module from Märklin and other suppliers.

• The unit is available as ready to use finished module or as finished module in a case or as a kit on a 86*76 mm printed circuit board with four fastening bores. (an empty case LDT-01 for kits and suitable assembly material can be found under Accessory).

• The feedback module RM-88-N-O from the Digital-Professional-Series can be operated without any problem on your digital controlled layout because it is 100% compatible to the s88-feedback bus. The finished module and the finished module in a case comes with a 24 month warranty.

• Each feedback module will be supplied with a detailed operating-/ assembly instruction.

• Sample connections for RM-88-N-O can be found here and at the file RM88_INFO_engl!

• The feedback module are available as kit as tested finished module or as tested finished module in a case.
   

  	kit (-B)	finished module (-F)	finished module in a case  (-G)
  RM-88-N-O	€ 39,90	€ 49,90	€ 53,30

   

  • Order Codes:

    RM-88-N-O-B (Part No. 310101): 16-fold Feedback Module with opto-coupling-inputs as kit.

    RM-88-N-O-F (Part No. 310102): 16-fold Feedback Module with opto-coupling-inputs as finished module.

    RM-88-N-O-G (Part No. 310103): 16-fold Feedback Module with opto-coupling-inputs as finished module in a case.

    Available ex warehouse.

    ---

  To assure a good connection:

  s88-Bus Cable!

  • The feedback module RM-88-N-O will be supplied without s88-bus cable. Please select a suitable bus cable (length and style) at the following table. For the s88-standard connection we supply an interference protected, twisted s88-bus cable with original s88-plugs at length of 0,5m, 1m and 2m. s88-standard connections are always required for the connection of the first feedback module to the command station or interface.
  • We offer for s88-bus connections in accordance to a blue screened patch cable with RJ-45 plugs at four different length of 0,5 to 3m.
  • The feedback module RM-88-N, RM-88-N-O and RM-GB-8-N can be connected between each other either via s88-standard connection "Kabel s88" or via "Kabel Patch" according to.

   

  s88-standard connection with 2 original s88-plugs, gray cable, twisted, round. Plus pin bar for bus extension.
  Kabel s88 0,5m	€ 5,50
  Kabel s88 1m	€ 7,50
  Kabel s88 2m	€ 9,50
  s88-connection according to with 2 RJ-45 plugs, blue cable, screened.
  Kabel Patch 0,5m	€ 2,50
  Kabel Patch 1m	€ 3,40
  Kabel Patch 2m	€ 4,80
  Kabel Patch 3m	€ 6,80

   

• Order Codes:

  Kabel s88 0,5m (Part No. 000102): With original s88-plugs,gray cable, twisted, round.

  Kabel s88 1m (Part No. 000106): With original s88-plugs,gray cable, twisted, round.
  Kabel s88 2m (Part No. 000101): With original s88-plugs,gray cable, twisted, round.
   

  Kabel Patch 0,5m (Part No. 000130): With RJ-45 plugs, blue cable, screened.

  Kabel Patch 1m (Part No. 000131): With RJ-45 plugs, blue cable, screened.

  Kabel Patch 2m (Part No. 000132): With RJ-45 plugs, blue cable, screened.

  Kabel Patch 3m (Part No. 000133): With RJ-45 plugs, blue cable, screened.

  Available ex warehouse.

Subject to technical changes and errors.
Märklin and Arnold are registered trade marks.

© 2011 by LDT