RS-16-O

Feedback module with 16 galvanic separated inputs for the RS-feedback bus as used by Lenz Digital plus!

Suitable for the feedback of 16 arbitrary contacts via the RS-feedback bus.

16-fold feedback module RS-16-O in a case.

• For the connection to the control units LZ100 or LZV100 of Lenz (up to 64 units).

• The feedback modules RS-16-O can be combined with any other RS-feedback module (LR101, RS-8).

• Easy and secure connection of the feedback contacts by screw clamps.

• The RS-16-O is equipped with opto couplers and can therefore feedback any reed contacts, push button, relay contacts etc. with digital- or direct voltage.

• It is suitable to use our turnout decoder S-DEC-4 for turnout feedback.

• Available as ready to use finished module, as finished module in a case or as a kit. It is assembled on a 86*76mm sized pc-board with four bores for assembly purposes (suitable assembly material can be found under accessories).

• Our feedback module RS-16-O from of the Digital Professional Series can be easily operated on your digital model railroad. It is 100% compatible to the RS-feedback bus. The finished module and the finished module in a case comes with a 2-years limited warranty.

• Each feedback module comes with a detailed operating- / assembly- instruction.

• Sample connections (RS16O_INFO) downloaden now!

• You can get the feedback module as a kit, as a checked finished module or as checked finished module in a case:
  

  	kit (-B)	finished module (-F)	finished module in a case (-G)
  RS-16-O	€ 44,90	€ 59,50	€ 62,90

• Order codes:

RS-16-O-B (Part-No. 310201): 16-fold feedback module with opto coupler for the RS-feedback bus as kit.

RS-16-O-F (Part-No. 310202): 16-fold feedback module with opto coupler for the RS-feedback bus as finished module.

RS-16-O-G (Part-No. 310203): 16-fold feedback module with opto coupler for the RS-feedback bus as finished module in a case .

© 2008 by LDT