RS-8

8-fold feedback module

with integrated

occupancy detector

for the RS-feedback bus (Lenz Digital plus) from the Digital-Professional-Series !

The feedback module RS-8 is a low priced LDT-component and is available as kit , as finished module in a case or as tested finished module.

• For the connection to the control units LZ100 or LZV100 of Lenz (up to 128 units or together with LR101 and LS110).

• Suitable for the monitoring of 8 track sections with a current load up to 3 Ampere. A peak current up to 7 Ampere are temporary acceptable. Isolated rails or track sections to be monitored for occupancy will get simply the digital current via the output clamps of the feedback module. The track sections can be isolated as 1-pole or as 2-poles.

• The 8-fold track occupancy module RS-8 is divided into two 4-fold occupancy monitors. This makes it possible to monitor tracks of two different booster lines. The devision into two 4-fold track monitors simplifies the control of reversing loops. More information about this issue can be found in the file "kehrschleife_32_engl" at the download section.

• Including voltage monitoring: is there no voltage at the tracks (e.g. after short circuit) the occupied status will be `frozen` during the interruption.

• Track voltage and feedback bus are galvanically separated by opto couplings from the power supply.

• The feedback modules RS-8 can be combined with other feedback modules (RS-16-O, LR101 oder LS110) as required.

• Avaiable as ready to use finished module, as finished module in a case or as a kit on a 110 * 96mm pc-board with 4 bores for assembly purposes (suitable enpty case as LDT-02 for kits from version 3.2 and assembly material can be found under accessories).

• Components from the Digital-Professional-Series  can be operated on your digital system without any problem. The RS-8 is compatible to the used RS-feedback bus.

• The finished modules come with a 24 month warranty.

• Each feedback module RS-8 will be supplied with a detailed operation- / assembly-instruction.

• Sample connections for the feedback module RS-8 can be found for downloading here!

• The RS-8 is available as kit, finished module or as finished module in a case.

	kit (-B)	finished module (-F)	finished module in a case (-G)
RS-8	€ 51,50	€ 65,90	€ 70,50

• Order code:

RS-8-B (Part No. 300211): 8-fold feedback module with integrated track occupancy detectors for the RS-feedback bus as kit.
RS-8-F (Part No. 300212): 8-fold feedback module with integrated track occupancy detectors for the RS-feedback bus as  finished module.
RS-8-G (Part No. 300213): 8-fold feedback module with integrated track occupancy detectors for the RS-feedback bus as  finished module in a case.

© 2011 by LDT