SA-DEC-4
A 4-fold
switch decoder for
Märklin-Motorola
and DCC
Digital from our Digital-Professional-Series
!

SA-DEC-4 for DCC (left
hand) and Märklin-Motorola (right hand) is equipped
with 4 bistable relays for a current load of up to 4 Ampere.
- Simple and secure connection
of the voltage supply and the consumers by screw clips.
- The switching-current
for the 4 bistable relays will be supplied by the digital circuit
or by a separate input
from an alternating current output
of a model railway transformer (14 to 18Volt
~) to the decoder. Valuable digital current can be saved!
-
A ready to use finished module,
finished module in a case or a kit on a 86 x 76 mm pc-board with four
bores for mounting purposes are available (Suitable installation material can
be ordered under accessories).
- The decoder from our
Digital-Professional-Series can operate without any difficulty
on your digitall model railroad. This decoder is
100% compatible with the
Märklin-Motorola data format
or the
DCC standard.
- The SA-DEC-4 decoder is
available as a kit, as tested finished module
or as tested finished module in a case:
-
| |
kit
(-B) |
finished
module
(-F) |
finished module
in a case (-G) |
|
SA-DEC-4 |
€ 29,50 |
€ 36,90
|
€ 40,30
|
-
SA-DEC-4-MM-B (Part-No. 210311): A 4-fold switch
decoder for Märklin-Motorola
as a
kit.
-
SA-DEC-4-MM-F (Part-No. 210312): A 4-fold
switch decoder for Märklin-Motorola
as a
finished module.
-
SA-DEC-4-MM-G (Part-No. 210313): A 4-fold
switch decoder for Märklin-Motorola
as
a finished module
in a case.
-
SA-DEC-4-DC-B (Part-No. 210211): A 4-fold switch
decoder for DCC
Digital as a
kit.
-
SA-DEC-4-DC-F (Part-No. 210212): A 4-fold
switch decoder for DCC
Digital as a
finished module.
-
SA-DEC-4-DC-G (Part-No. 210213): A 4-fold
switch decoder for DCC
Digital as a
finished module in a case.
Subject to technical changes
and errors.
Märklin and Motorola are trademarks.

© 2007 by LDT