S-DEC-4

4-fold turnout decoder for Märklin-Motorola and DCC Digital
from our Digital-Professional-Series !

Turnout decoder S-DEC-4 for digital formats DCC and Märklin-Motorola.

Functional extension: The S-DEC-4-DC compatible to the NMRA DCC data format can now shift turnouts with the function keys F1 to F4 of  loc-addresses (e.g. Lokmaus 2® or R3® from Roco)! 

• For digital control of:

  up to 4 twin-coil magnetic accessories (e.g. turnouts or signals)

  up to 8 single-coil magnetic accessories (e.g. uncoupling tracks)

  Up to four permanent power switch units (DSU) (e.g. for turnout-/ and road lights)

• The switching current is supplied to the decoder either from the digital circuitry or through a separate input directly from the alternating current (AC) output of a model railroad transformer (14 to 18V~). Valuable digital current can be saved !

• Simple and secure connection of turnouts, signals and uncoupling tracks by screw clips.

• S-DEC-4 is a 4-fold turnout decoder like the S4, k87N, k83 or LS110  with self learning decoder address:

  The decoder address can just be set by pushing the S-DEC-4 programming key and then a key on the turnout-switchboard, or by a switch command through a PC with connected INTERFACE.

   

  The decoder address will be permanently stored, but can always be changed by pressing the programming key again. It’s as simple as that !

• Available as ready to use finished module, as finished module in a case or as kit on a 86*76 mm pc-board with four bores for mounting purposes. (Suitable installation material can be found under accessories).

• Each of the 4 decoder outputs can be loaded with current up to 1 Ampere. This allows also the shifting of jammed turnouts. It is possible to switch 2 turnouts-/ or 1 turnout and one signal simultaneous.

• If you require a feedback of the turnout position please load the description of turnout_feedback.zip (size: 173 kb) to your pc.

• The decoder from our Digital-Professional-Series can be operated without any difficulty from your digital controlled model railway. This decoder is 100% compatible to the Märklin-Motorola data format or the DCC standard.

• The finished module and the finished module in a case comes with a 24 month limited warranty.

• Each S-DEC-4 decoder will be supplied with a detailed operating-/ assembly instruction.

• The S-DEC-4 is available as a kit, as checked finished module or as checked finished module in a case:

   

  	kit (-B)	finished module (-F)	finished module in a case (-G)
  S-DEC-4-MM	€ 21,90	€ 29,50	€ 32,90
  S-DEC-4-DC	€ 21,90	€ 29,50	€ 32,90

• Order codes:

S-DEC-4-MM-B (Part-No. 910311):  4-fold turnout decoder for Märklin-Motorola as a kit.

S-DEC-4-MM-F (Part-No. 910312):  4-fold turnout decoder for Märklin-Motorola as a finished module.

S-DEC-4-MM-G (Part-No. 910313):  4-fold turnout decoder for Märklin-Motorola as a finished module in a case.

 

S-DEC-4-DC-B (Part-No. 910211):  4-fold turnout decoder for DCC Digital as a kit.

S-DEC-4-DC-F (Part-No. 910212):  4-fold turnout decoder for DCC Digital as a finished module.

S-DEC-4-DC-G (Part-No. 910213):  4-fold turnout decoder for DCC Digital as a finished module in a case.

 

Subject to technical changes and errors.
^* ) Märklin is a trademark of Gebr. Märklin & Cie. GmbH, Göppingen.
^{* *} ) Motorola is a trademark of Motorola Inc., Tempe-Phoenix / Arizona (USA).

© 2007 by LDT