SX-GB-8 

8-fold feedback module with track occupancy detector for the Sx-Bus (Selectrix®) from the Digital-Professional-Series !

The SX-GB-8 is a 8-fold feedback module with integrated track-occupancy-detector for the Sx-bus.

Therefore can it operate as track occupancy monitor with any Selectrix® or compatible digital central unit which support the Sx-bus via 5-poles diode plug

The SX-GB-8 can be tied in into the Sx-bus as any other feedback module.

An automatic fuse on each of the 8 outputs makes the SX-GB-8 short-circuit protected.

 

Each output can be loaded up to 1 Ampere.

 

The feedback address can be programmed via the Sx-bus from 0 bis 103.

 

The release-delay-time of the track occupancy monitoring can be set via the Sx-bus from 0 to 2,48 seconds.

 

The SX-GB-8 is available as tested and ready to use finished module or as kit on a 110*96mm pc-board with 4 bores for mounting purposes.(Suitable installation material can be ordered under accessories).

 

Each feedback module SX-GB-8 will be supplied together with a 1,5m Sx-bus cable and a detailed operating- /assembly instruction.

 

The SX-GB-8 is available as low-cost kit or as tested finished module:

 

	kit (-B)	finished module
SX-GB-8	€ 48,90	€ 62,90

 

• Order code:

SX-GB-8-B (Part No. 320041): 8-fold feedback module with track occupancy detector for the Sx-bus as kit.

 

SX-GB-8 (Part No. 320042): 8-fold feedback module with track occupancy detector for the Sx-bus as finished module.

Subject to technical changes and errors.

© 2007 by LDT