TurnTable-Decoder (TT-DEC) 

For a digital control of turntables without any alteration at the turntable!

For the digital formats Märklin-Motorola and DCC.

The TurnTable-Decoder TT-DEC is suitable for the digital control of Fleischmann and Märklin-Turntables:

The command of the TT-DEC is compatible to the Märklin Turntable-Decoder 7286. Therefore is an immediate start of the TT-DEC on any  digital central unit or model railway software possible which is supporting the Märklin Turntable-Decoder 7286.

The digital format (Märklin-Motorola or DCC) and the location of  the  pit track connections are easily programmable via any digital central unit which is able to switch turnouts or via a model railway software which supports the Märklin turntable 7286. Any pit track connection of the turntable can be programmed as track 1 (reference track).

Turntables with 48 or 24 track connections can be directly digital controlled by the TT-DEC.

The TT-DEC permits the step by step rotation to the right- or left side, the direct connection with pre-selected tracks and turning the movement direction of the turntable by 180 degree.

The rotation speed of the turntable can be individually adjusted via a potentiometer. The motor of the turntable receives a stabilised direct voltage for a steady turning movement of the bridge track.

The Turntable-Decoder TT-DEC is as well able of a digital  operation of Märklin- und Fleischmann-turntables with a refit of a Bell-type armature motor supplied by sb modellbau.

The plug of the 6-poles ribbon cable of the Märklin-Turntable 7286 can be directly plugged onto the pin plug bar of the TT-DEC.

If the Turntable-Decoder TT-DEC will be extended by a PermanentPowerSwitch Unit DSU is always a correct polarity connection of the bridge track on the 2-conductor-Fleischmann turntables possible. Therefore is no reversing loop module for the bridge track required.

If the turntable will be in the line-up track position this can be reported to the model railway software via the feedback output of the Turntable-Decoder TT-DEC.

Sample Connections for the TT-DEC for downloading can be found here! 

 

Each TurnTable-Decoder TT-DEC will be supplied together with a detailed Operation- or Assembly Instruction.

• You can purchase the turntable-decoder TT-DEC as a kit, as tested finished module or as tested finished module in a case for the data format Märklin-Motorola and DCC:
  

  	kit (-B)	finished module (-F)	finished module in a case (-G)
  TT-DEC	€ 64,90	€ 85,50	€ 88,90

• Order Code:

TT-DEC-B (Part-No. 010501): Turntabel-Decoder as a kit.

TT-DEC-F (Part-No. 010502): Turntable-Decoder as a finished module.

TT-DEC-G (Part-No. 010503): Drehscheiben-Decoder as a finished module in a case.

Available ex warehouse.

Subject to technical changes and errors.

© 2008 by LDT