Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

en:db-2 [2014/11/15 06:29] (current)
Line 1: Line 1:
 +====== DB-2 ======
  
 +=== DigitalBooster from the Digital-Professional-Series! ===
 +
 +== Amplification of the data formats Märklin-Motorola, mfx®, M4 and DCC. ==
 +
 +{{  :de:foto:db-2-g_24_ic.jpg  }}
 +
 +The **D**igital**B**ooster **DB-2** is a **short circuit protected Power-Amplifier (Booster)** for digital model railway layouts. It supplies a **digital current** of **2.5 Ampere**.
 +
 +{{  :de:cad:db-2_03.gif  }}{{  :de:cad:db-2_05.gif  }}
 +
 +==== The DB-2 shall be connected to the command station (e.g. Control Unit, Central Station 1 and 2, ECoS, Intellibox 1 and 2, TWIN-CENTER, Commander, EasyControl) or to another booster (e.g. DB-2, DB-4, 6015, 6017, Power 2, Power 3) with the supplied 5-poles booster-bus cable. The first booster shall be always directly connected to the command station via the 5-poles cable. The second booster shall be connected to the first booster etc. ====
 +
 +====== Features of the DB-2 ======
 +
 +    * The **DigitalBooster DB-2** amplifies the **data formats Märklin-Motorola, mfx®, M4** and **DCC**.
 +    * The **DB-2** can be connected to **any command station** which supports the **5-poles booster bus**: **Control Unit, Central Station 1 and 2, Intellibox 1 and 2, EasyControl, ECoS 1 and 2, Commander, DiCoStation, KeyCommander and TWIN-CENTER**.
 +    * Each **Power-Amplifier DB-2** will be supplied with a **5-poles boosterbus-cable (1m length)**.
 +    * For the **supply** of the **DigitalBooster DB-2** are **model railway transformers** suitable with a **capacity of min. 50VA** and an **alternating current of 16 to 18 Volt** (e.g. from **Conrad Electronic Part No. 404288** with **52VA / 18V**).
 +    * If you want to use the **DigitalBooster DB-2** on a command station which does not supports the 5-poles booster bus but only the 3-poles **DCC-Boosterbus (clamp marking DCE)** (e.g. **Lenz Digital plus, IB-Basic and IB-COM**) you can use the Booster-Adapter [[:en:adap-cde|Adap-CDE]].
 +    * If you want to use our **low cost DigitalBooster DB-2** as well on **Roco- or Fleischmann command stations (Roco Part No. 10761 and 10764 / Fleischmann Part No. 680901)and multiZENTRALEpro** you can use the Booster-Adapter [[:en:adap-roco|Adap-Roco]].
 +    * LDT-Components from the **Digital-Professional-Series** can operate on your digital layout without any problems.
 +    * The finished module in a case comes with a **24 month warranty**.
 +    * Each **DigitalBooster DB-2** will be supplied with a detailed **operating-/respectively assembly-instruction**. Those instructions can be found within the next section.
 +    * You can purchase the **DigitalBooster DB-2** as a **kit (-B)**  or as a tested **finished module in a case (-G)**. Suitable **assembly material** is available under [[:en:zubehoer|Accessories]].
 +
 +====== Downloads ======
 +
 +Instructions regarding this article can be found here: [[:en:dl_boo_db2|Downloads DB-2]].\\
 +Instructions for all LDT-Components can be found here: [[:en:downloads|Overview Downloads]].
 +
 +====== Sample-Connections ======
 +
 +Sample-connections regarding this article can be found here: [[:en:ab_db_2|Sample-Connections DB-2]].\\
 +Sample-connections for all LDT-Components can be found here: [[:en:anschlussbeispiele|Overview Sample-Connections]].\\
 +{{  :de:cad:page_365.gif  }}
 +
 +====== Add to Wish List / Prices ======
 +
 +**Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.** 
 +
 +^{{:de:images:noticelist_m.png}} |{{:de:images:blindgif.gif?500x1}}  \\ <html>Add to <b><u class="linkit" onclick="toNoticeList('080061');">Wish List</u></b></html>: **DB-2-B** (Part-No.: 080061): **Short circuit protected DigitalBooster (2.5 Ampere)** as a **kit** (**49,90 €***). \\ <html>Add to <b><u class="linkit" onclick="toNoticeList('080063');">Wish List</u></b></html>: **DB-2-G** (Part-No.: 080063): **Short circuit protected DigitalBooster (2.5 Ampere)** as a \\ **finished module in a case** (**75,90 €***).\\ {{:de:images:blindgif.gif?580x1}} \\  ** * All prices incl. VAT, plus Shipping.**  |
 +
 +[[:en:db-2#db-2|{{  :de:images:zurueck_en_page.png?40x32}}]] Subject to technical changes and errors.\\
 +© 2014 by LDT
 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki Design by Chirripó