Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen gezeigt.
— |
en:gbs-dec [2022/07/31 05:46] (current) |
||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ====== GBS-DEC ====== | ||
+ | === Decoder for Switchboard Lights from the Digital-Professional-Series ! === | ||
+ | |||
+ | {{ :de:cad:gbs-demo.gif }} | ||
+ | |||
+ | ====== Features ====== | ||
+ | |||
+ | **To track** and **influence** the events of a layout with a **switchboard** is much **more comfortable** as done with a PC-Monitor. | ||
+ | |||
+ | Either you assemble your **own switchboard** or you combine components of available **switchboard systems**. | ||
+ | |||
+ | But how are getting the **switchboard informations to the PC** and the **informations of turnout status and track occupancy** from the **digital system** to the **switchboard**? | ||
+ | |||
+ | ---- | ||
+ | \\ For **PC-supported digital systems** with s88-feedback bus **(e.g. Märklin-Interface, Cental Station 1 and 2, ECoS, Intellibox, TWIN-CENTER, DiCoStation, High Speed Interface HSI-88(-USB))** is the transfer of the **turnout-key information** from the switchboard via **feedback modules** possible at relative low cost. | ||
+ | |||
+ | **16 switch keys** for turnouts or other functions can be connected to one **Feedback Module [[:en:rm-88-n|RM-88-N]]**. | ||
+ | |||
+ | {{ :de:cad:rm88n_gbs_01.gif }} | ||
+ | |||
+ | By using the **Dataswitch [[:en:dsw-88-n|DSW-88-N]]** it will be easy to branch to the **feedback modules** within the **switchboard**. | ||
+ | |||
+ | {{ :de:cad:dsw-88-n-gbs_13.gif }} | ||
+ | |||
+ | At the **left line** there are the **feedback modules** of the **layout** located. At the **right line** are the **feedback modules** of the **switch board**. If the **existing digital system** shall be **extended** by one **switch board** the **feedback module contacts have not to be re-numbered** whenever the **dataswitch [[:en:dsw-88-n|DSW-88-N]]** will be used as shown above. | ||
+ | |||
+ | ---- | ||
+ | \\ The status of **turnout positions and occupancy informations** of the **layout** shall now be **transferred to the switchboard** to enable the **illuminated indication** of the **turnout- and drive track-symbols** as on a PC-monitor. | ||
+ | |||
+ | Just there comes the new **Decoder for Switchboard Lights GBS-DEC** into action. | ||
+ | |||
+ | {{ :de:foto:gbs-startset-dc_ic.jpg }} | ||
+ | |||
+ | ====== The Decoder for Switchboard Lights GBS-DEC consist of three components: ====== | ||
+ | |||
+ | ===== 1. GBS-Master ===== | ||
+ | ===== The GBS-Master module is not anymore available. ===== | ||
+ | The **GBS-Master** module (87mm x 89mm) which is connected to the **digital-current-circuit** (e.g. J and K or red and brown at the command station or at the booster) or the **s88-Feedback bus** for "bugging" the informations. | ||
+ | |||
+ | {{ :de:foto:gbs-master_12_01.jpg?640x480 }} | ||
+ | |||
+ | ===== 2. GBS-Display ===== | ||
+ | |||
+ | The **GBS-Display** module (110mm x 89mm) which can illuminate up to **16 turnout-** or **32 track occupancy symboles** at the switchboard. Onto each GBS-Master module can be up to **4 GBS-Display** modules connected. Each GBS-Display output can supply a current of **0,5 Ampere**. Each **GBS-Display** module can supply a **total current of 3 Ampere**. This makes it possible to employ **light emitting diodes** (with serial resistor) as well as **model railway incandescent lamps** of the switchboard. | ||
+ | |||
+ | {{ :de:foto:light-display_18_ic.jpg?640 }} | ||
+ | |||
+ | ===== 3. GBS-Service ===== | ||
+ | |||
+ | The **GBS-Service** module (92mm x 71mm) which will be used for **programming the addresses**. After all adjustments have been settled the connection of the GBS-Service module is not longer required during the operation. It can be disconnected from the GBS-Master module and can be used for programming addresses on further GBS-Master modules. | ||
+ | |||
+ | {{ :de:foto:gbs-service_10_01.jpg?640x480 }} | ||
+ | |||
+ | ====== Illumination of turnout symboles on the switchboard: ====== | ||
+ | |||
+ | {{ :de:cad:gbs-dec_01.gif?642x258 }}The **Decoder for Switchboard Lights GBS-DEC** can be **connected** to the **digital current circuit** as any other decoder. On this way the **GBS-DEC** receives the switch-information for the illuminated indication of turnouts from the command station or from the PC. | ||
+ | |||
+ | As a turnout decoder (e.g. turnout decoder **[[:en:s-dec-4|S-DEC-4]]**) actually **switches a turnout** when receiving a corresponding command from the command station the **GBS-DEC** will indicate the status of the relevant turnout at the **switchboard** by switching the **illuminated indication of the turnout** at the same time. | ||
+ | |||
+ | The **GBS-DEC** is available for the **digital format Märklin-Motorola** and **DCC**. If you control the turnouts on your layout within the Märklin Motorola format the master module **GBS-Master-MM** will be suitable. For the application of the DCC format the master module **GBS-Master-DC** has to be used. | ||
+ | |||
+ | To avoid a **non-necessary load of the digital current circuit** for the **illuminated indication at the switch board** the **GBS-DEC** can get the power supply by a simple **light-transformer**. | ||
+ | |||
+ | On this way can get **drive tracks** the illuminated indication via accessible **turnout addresses**. For this events turnout addresses can be used which have not been occupied for switching turnouts. | ||
+ | |||
+ | ====== Illumination of track occupancy symboles on the switchboard: ====== | ||
+ | |||
+ | If using the GBS-Master module **GBS-Master-s88** the **GBS-DEC** will be operated within the **s88-mode**. Then can the **GBS-DEC** "bug" the **s88-bus** and can **directly** switch the **illuminated indication** of the relevant track section at the switchboard when receiving an occupancy information. | ||
+ | |||
+ | {{ :de:cad:gbs-dec_02.gif?642x254 }}If also the **turnout position** shall be **controlled via the s88-bus** the turnout symbol at the switch board will indicate the actual turnout status. | ||
+ | |||
+ | For your information how to control turnouts via the s88-feedback bus you can download the file **"Feedback of the turnout position"** at the page **[[:en:dl_rm_88_n-o|Downloads]]** at the Internet. | ||
+ | |||
+ | {{ :de:cad:gbs-dec_03.gif?643x253 }} | ||
+ | |||
+ | __**The following picture shows the possibilities:**__ | ||
+ | |||
+ | At the sample can be 16 turnouts switched via the switchboard. The turnout keys of the switch board will be read via the 2 right side feedback modules **[[:en:rm-88-n|RM-88-N]]**. | ||
+ | |||
+ | {{ :de:cad:dsw-88-n-gbs_20.gif }} | ||
+ | |||
+ | The feedback information (rail contacts and turnout feedback information) of the layout will be transferred from the left feedback modules **[[:en:rm-88-n-o|RM-88-N-O]]** via the control unit (here Intellibox) to the PC. | ||
+ | |||
+ | The **GBS-DEC** can evaluate the feedback information received via the s88-bus and switch the illuminated indication of the turnout symboles in accordance to the actual turnout status. Even if a turnout will be switched manually the new turnout position will be immediately indicated at the switch board. | ||
+ | |||
+ | Also the PC receives this information and the monitor switch board will be actualized. | ||
+ | |||
+ | Each **GBS-Module** will be supplied with a detailed operating-/respectively assembly-instruction. Those instructions can be found within the next section. | ||
+ | |||
+ | The components **GBS-Service** and **GBS-Display** for the Switchboard Light Decoder (GBS-DEC) are available as **kit (-B)** or as checked **finished module (-F)**. | ||
+ | ====== Downloads ====== | ||
+ | |||
+ | Instructions regarding this article can be found here: [[:en:dl_gbs_dec|Downloads GBS-DEC]].\\ | ||
+ | Instructions for all LDT-Components can be found here: [[:en:downloads|Overview Downloads]]. | ||
+ | |||
+ | ====== Sample-Connections ====== | ||
+ | |||
+ | Sample-connections regarding this article can be found here: [[:en:ab_gbs_dec|Sample-Connections GBS-DEC]].\\ | ||
+ | Sample-connections for all LDT-Components can be found here: [[:en:anschlussbeispiele|Overview Sample-Connections]].\\ | ||
+ | {{ :de:cad:page_1517.gif }} | ||
+ | |||
+ | ====== Add to Wish List / Prices ====== | ||
+ | |||
+ | **Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.** | ||
+ | |||
+ | ^{{:de:images:noticelist_m.png}} | \\ {{:de:images:blindgif.gif?500x1 }} \\ <html>Add to <b><u class="linkit" onclick="toNoticeList('050031-gbs');">Wish List</u></b></html>: **GBS-Display-B** (Part-No.: 050031): **Display-Module** for the\\ Decoder for Switchboard Lights GBS-DEC as a **kit** (**59,90 €***).\\ <html>Add to <b><u class="linkit" onclick="toNoticeList('050032-gbs');">Wish List</u></b></html>: **GBS-Display-F** (Part-No.: 050032): **Display-Module** for the\\ Decoder for Switchboard Lights GBS-DEC as a **finished module** (**79,90 €***).\\ \\ <html>Add to <b><u class="linkit" onclick="toNoticeList('050041');">Wish List</u></b></html>: **GBS-Service-B** (Part-No.: 050041): **Service-Module** for the\\ Decoder for Switchboard Lights GBS-DEC as a **kit** (**26,90 €***).\\ <html>Add to <b><u class="linkit" onclick="toNoticeList('050042');">Wish List</u></b></html>: **GBS-Service-F** (Part-No.: 050042): **Service-Module** for the\\ Decoder for Switchboard Lights GBS-DEC as a **finished module** (**39,90 €***).\\ \\ {{:de:images:blindgif.gif?580x1}} \\ ** * All prices incl. VAT, plus Shipping.** | | ||
+ | |||
+ | [[:en:gbs-dec#top|{{ :de:images:zurueck_en_page.png?40x32}}]] Subject to technical changes and errors.\\ | ||
+ | © 2022 by LDT |