Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

en:rfid-home [2014/11/15 08:59] (current)
Line 1: Line 1:
 +====== Components for the Transponder Technology (RFID) ======
  
 +== For EM-4102 (125 kHz) compatible transponder (RFID-Tag) ==
 +
 +{{  :de:foto:col-10_14_01.jpg?450x338  }}
 +
 +==== Transponder-Reader (COL-10) with durable external antenna (70 x 51 mm and only 1,6mm thick) together with a transponder integrated at a key tag. ====
 +
 +{{  :de:foto:inter-10_15_01.jpg  }}
 +
 +==== RS232 Interface INTER-10 for up to 99 Transponder-Reader COL-10. ====
 +
 +=== Features of the Components for the Transponder Technology (RFID) ===
 +
 +====== 1. General Information  ======
 +
 +The **Transponder-Reader COL-10** contains a **rugged external printed board antenna** and is suitable **for the reading** of **125 kHz transponder in accordance to EM-4102**.
 +
 +In accordance to the mode of application is it possible that the **once laser programmed serial number** e.g. red from a **glas pipe** - or **disc-transponder** or from a **transponder integrated within a key tag** or from a **ISO chipcard**.
 +
 +The **programmed serial number** of the transponder will be **solitary recorded by the Transponder-Reader COL-10** and transmitted via an RS485 interface.
 +
 +===== 1.1. Sample Connection 1 (transponder system with arbitrary evaluation unit): =====
 +
 +Up to **99 Reader COL-10** can transmit the **transponder data** via the **RS485 interface** to any available **evaluation unit**.
 +
 +{{  :de:cad:rfid-01.gif  }}
 +
 +===== 1.2. Sample Connection 2 (transponder system with PC-connection (COM)): =====
 +
 +If you want to transmit the **transponder information** to a **PC-program** you can implement the **Interface INTER-10** which will transmit the **data** via the **serial COM-Port (RS232)** to the **PC**.
 +
 +{{  :de:cad:rfid-02.gif  }}
 +
 +===== 1.3. Sample Connection 3 (transponder system with PC-connection (USB)): =====
 +
 +If the **transponder information** will be transmitted via the **Interface TD-88** is it possible to transmit the data via the **High Speed Interface HSI-88-USB** and via the **USB-interface** to the PC. Each **Interface TD-88** is able to process the **transponder data** of **max. 31 Transponder-Reader COL-10**. Onto each **HSI-88-USB** can be up to **31 Interfaces TD-88** connected.
 +
 +{{  :de:cad:rfid-03.gif  }}
 +
 +====== 2. Operation Area ======
 +
 +    * **access control**
 +    * **time control**
 +    * **product tracing**
 +    * **quality assurance**
 +    * **access right**
 +    * **object identification**
 +
 +====== 3. Transponder-Reader COL-10 for EM-4102 (125 kHz) compatible Transponder (RFID-Tag) ======
 +
 +{{  :de:foto:col-10_14_01.jpg  }}
 +
 +The **Transponder-Reader COL-10** contains a **rugget external printed board antenna**.
 +
 +In accordance to the respective application is the the reading of the **programmed serial number** possible from a **glas-pipe-** or **disc-transponder** or from a **transponder integrated at a key-tag** (shown at the picture) or from an **ISO chip-card**.
 +
 +====== 4. Plug-In Power Supply SNG-10 ======
 +
 +{{  :de:foto:sng-10_01.jpg  }}
 +
 +For a **reading distance** of **up to 10cm (depending to the type of transponder)** shall get the **Transponder-Reader COL-10** a **supply** of **direct current of 13,6 Volt** from the **Plug-In Power Supply SNG-10**.
 +
 +The **black cable** at the **output** of the **plug-in power supply device** is of **negative polarity** and has to be connected to the **input "brown"** of the of the **supply clamp KL2** of the **Reader COL-10**. The **black cable with a white mark** is of **positive polarity** and has to be connected to the **input "yellow"** of the **Readers COL-10**.
 +
 +Each **plug-in power supply device SNG-10** can **supply** up to **10 Transponder Reader COL-10**.
 +
 +====== 5. RS232 Interface INTER-10 for up to 99 Transponder-Reader COL-10 ======
 +
 +{{  :de:foto:inter-10_15_01.jpg  }}
 +
 +Via the **Interface INTER-10** is it possible to transmit the data of up to **99 Transponder Reader COL-10** via the **serial interface RS232** e.g. to a PC.
 +
 +The interface **INTER-10** is connected to the **Transponder Reader COL-10** with a **2-wire RS485 interface**.
 +
 +====== 6. Sample application for the object identification: Transponder Technology for the Train Identification within model railway layouts ======
 +
 +With the **train identification** via **transponder** is it possible to identify automatically every train.
 +
 +The **trains** have to be **equipped** with **transponders** and on strategic convenient **identification locations (e.g. location where new trains will be appointed)** a **transponder reader COL-10** has to be assembled. The **reader COL-10** has a **flat external antenna of 1,6mm thickness**. These has to be assembled **near the track**. The **maximum reading distance** is **40mm**, provided that the **Reader COL-10** will get a ac voltage supply of **14 to 16 Volt** from a **model railway transformer**. The **reading distance** will **increase** by about **50%** if the transponder reader will get the supply of **13,5 Volt DC** from the **plug-in power supply device SNG-10**.
 +
 +The **unique laser programmed serial number** of the **transponder** assembled to the train will be red by the **Reader-Unit COL-10** and transmitted via the **interfaces INTER-10** or **TD-88** to the **PC-model railway software**. Within the PC-software are the **transponder data** stored together with **train name** or **train number** and will be indicated at the PC-screen within the **monitor command panel**.
 +
 +Whenever a **train** has been indicated by the train identification of the **model railway software** the model railway software will realize the further **train-tracing** and **controling** via the **standard feedback modules** such as [[en:rm-88-n|RM-88-N]], [[en:rm-88-n-o|RM-88-N-O]], RM-DEC-88, RM-DEC-88-O or [[en:rm-gb-8-n|RM-GB-8-N]] for the s88-feedback bus or [[en:rs-16-o|RS-16-O]] respectively [[en:rs-8|RS-8]] for the **RS-feedback bus**.
 +
 +{{  :de:cad:td-88_12.gif  }}
 +
 +The **transponder data for the train identification** will be transmitted from the **transponder reader COL-10** e.g. via the **interface TD-88** and over the **s88-feedback** bus and the **HSI-88(-USB)** to the **PC** respectively to the **model railway software**. The interface **TD-88** can be integrated within one of the **three bus lines** between the **feedback modules** as required.
 +
 +----
 +
 +{{  :de:cad:inter-10_12_13.gif  }}
 +
 +The **transponder data for the train identification** will be transmitted from the **transponder reader COL-10** e.g. via the **interface INTER-10** over the serial **COM-interface** to the **PC** respectively to the **model railway software**.
 +
 +----
 +
 +===== Samples for the assembly of antennas and transponders: =====
 +
 +{{  :de:foto:trans-2_01.jpg?640x497  }}
 +
 +The reader antenna has been assembled at a tunnel section. The **disc-transponder (TRANS-2)** has to be simply glued onto every loc body. This is possible on loc bodies made of plastic. The antenna will "float" about 2 cm above the locs.
 +
 +----
 +
 +{{  :de:foto:trans-1_01.jpg  }}
 +
 +A **glass-tube transponder (TRANS-1)** has been attached between the buffers of a loc. The transponder has been attached to a toothpick which lays accross the buffers to assure that the metal buffers will not reduce the reading sensitivity. The transponder and the support can be visually concealed by use of a little black paint. The antenna has been assembled at a distance of 2,5cm from the HO-track center for example at the entrance of a tunnel.
 +
 +----
 +
 +{{  :de:foto:trans-1_02.jpg  }}
 +
 +**Glass-tube transponders (TRANS-1)** have to be attached below the goods of a freight waggon or inside a passenger waggon. The distance of the antenna from the center of the HO-track shall be 2,5cm (e.g. at tunnel entrances).
 +
 +----
 +
 +{{  :de:foto:trans-2_02.jpg  }}
 +
 +**Disc-transponders (TRANS-2)** have to be attached at the center of freight or passenger cars or glued onto the inside of one side wall. The distance of the antenna from the center of the HO-track shall be 2,5cm (e.g. at tunnel entrances).
 +
 +====== 7. Design of Components for the Transponder Technology ======
 +
 +===== 7.1. Transponder-Reader COL-10 =====
 +
 +    * Each **Transponder-Reader COL-10** will be supplied with a detailed **operating- /assembly-instruction**. Those instructions can be found within the next section.
 +    * The finished module in a case comes with **24 month warranty**.
 +    * The **Transponder-Reader COL-10** can be purchased as **kit (-B)** or as checked **finished module in a case (-G)**. Suitable **assembly material** is available under [[en:zubehoer|Accessories]].
 +
 +== Downloads ==
 +
 +Instructions regarding this article can be found here: [[:en:dl_rfid|Downloads COL-10]].\\
 +Instructions for all LDT-Components can be found here: [[:en:downloads|Overview Downloads]].
 +
 +== Add to Wish List ==
 +
 +**Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.**
 +
 +^{{:de:images:noticelist_m.png}} |{{:de:images:blindgif.gif?500x1}}  \\ <html>Add to <b><u class="linkit" onclick="toNoticeList('070051');">Wish List</u></b></html>: **COL-10-B** (Part-No.: 070051): **Transponder-reader** as a **kit** (**69,90 €***).\\ <html>Add to <b><u class="linkit" onclick="toNoticeList('070053');">Wish List</u></b></html>: **COL-10-G** (Part-No.: 070053): **Transponder-reader** as a **finished module in a case** (**88,90 €***).\\ {{:de:images:blindgif.gif?580x1}} \\  ** * All prices incl. VAT, plus Shipping.**  |
 +
 +===== 7.2. Plug-In Power Supply Device  SNG-10 =====
 +
 +    * Each **Plug-In Power Supply Devise SNG-10** will be supplied with a detailed **operating- /assembly-instruction**. Those instructions can be found within the next section.
 +    * The **Plug-In Power Supply Devise SNG-10** can be purchased as **finished module in a case**.
 +
 +== Downloads ==
 +
 +Instructions regarding this article can be found here:  [[:en:dl_rfid|Downloads SNG-10]].\\
 +Instructions for all LDT-Components can be found here: [[:en:downloads|Overview Downloads]].
 +
 +== Add to Wish List ==
 +
 +**Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.**
 +
 +^{{:de:images:noticelist_m.png}} |{{:de:images:blindgif.gif?500x1}}  \\ <html>Add to <b><u class="linkit" onclick="toNoticeList('000127');">Wish List</u></b></html>: **SNG-10** (Part-No.: 000127): **Plug-In Power Supply Device** as a **finished module in a case** (**29,90 €***).\\ {{:de:images:blindgif.gif?580x1}} \\  ** * All prices incl. VAT, plus Shipping.**  |
 +
 +===== 7.3. Serial RS232 Interface INTER-10 =====
 +
 +    * Each **serial interface INTER-10** will be supplied with a detailed **operating- /assembly-instruction**. Those instructions can be found within the next section.
 +    * The finished module in a case comes with **24 month warranty**.
 +    * The **serial interface INTER-10** can be purchased as tested **finished module in a case (-G)**. Suitable **assembly material** is available under [[en:zubehoer|Accessories]].
 +
 +== Downloads ==
 +
 +Instructions regarding this article can be found here:  [[:en:dl_rfid|Downloads Inter-10]].\\
 +Instructions for all LDT-Components can be found here: [[:en:downloads|Overview Downloads]].
 +
 +== Add to Wish List ==
 +
 +**Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.**
 +
 +^{{:de:images:noticelist_m.png}} |{{:de:images:blindgif.gif?500x1}}  \\ <html>Add to <b><u class="linkit" onclick="toNoticeList('060823');">Wish List</u></b></html>: **INTER-10-G** (Part-No.: 060823): **Serial (RS232) Interface** as a **finished module in a case** (**144,90 €***).\\ {{:de:images:blindgif.gif?580x1}} \\  ** * All prices incl. VAT, plus Shipping.**  |
 +
 +===== 7.4. Interface for the s88-feedback bus TD-88 =====
 +
 +    * Each **Interface TD-88** will be supplied with a detailed **operating- /assembly-instruction**. Those instructions can be found within the next section.
 +    * The finished module in a case comes with **24 month warranty**.
 +    * The **Interface TD-88 **can be purchased as **kit (-B)** or as checked **finished module in a case (-G)**. Suitable **assembly material** is available under [[en:zubehoer|Accessories]].
 +
 +== Downloads ==
 +
 +Instructions regarding this article can be found here:  [[:en:dl_rfid|Downloads TD-88]].\\
 +Instructions for all LDT-Components can be found here: [[:en:downloads|Overview Downloads]].
 +
 +== Add to Wish List ==
 +
 +**Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.**
 +
 +^{{:de:images:noticelist_m.png}} |{{:de:images:blindgif.gif?500x1}}  \\ <html>Add to <b><u class="linkit" onclick="toNoticeList('060021');">Wish List</u></b></html>: **TD-88-B** (Part-No.: 060021): **TrainDetect-88** as a **kit** (**69,90 €***).\\ <html>Add to <b><u class="linkit" onclick="toNoticeList('060023');">Wish List</u></b></html>: **TD-88-G** (Part-No.: 060023): **TrainDetect-88** as a **finished module in a case** (**94,50 €***).\\ {{:de:images:blindgif.gif?580x1}} \\  ** * All prices incl. VAT, plus Shipping.**  |
 +
 +===== 7.5. Transponder according to EM-4102 (125kHz) =====
 +
 +{{  :de:cad:trans1.gif  }}
 +
 +== Add to Wish List ==
 +
 +**Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.**
 +
 +^{{:de:images:noticelist_m.png}} |{{:de:images:blindgif.gif?500x1}}  \\ <html>Add to <b><u class="linkit" onclick="toNoticeList('000124');">Wish List</u></b></html>: **TRANS-1** (Part-No.: 000124): **Glass-tube transponder (3.1 x 13.3mm)** (**37,50 €***).\\ <html>Add to <b><u class="linkit" onclick="toNoticeList('000125');">Wish List</u></b></html>: **TRANS-2** (Part-No.: 000125): **Disc-transponder (1 mm thick, diameter 20 mm)** (**40,00 €***).\\ {{:de:images:blindgif.gif?580x1}} \\  ** * All prices incl. VAT, plus Shipping.**  |
 +
 +[[:en:rfid-home#Components_for_the_Transponder_Technology_RFID|{{  :de:images:zurueck_en_page.png?40x32}}]] Subject to technical changes and errors.\\
 +© 2014 by LDT
 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki Design by Chirripó