Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

en:rm-dec-88 [2012/10/09 10:46]
ldt_kahrs
en:rm-dec-88 [2016/08/18 17:41] (current)
Line 1: Line 1:
 ====== RM-DEC-88 and RM-DEC-88-O ====== ====== RM-DEC-88 and RM-DEC-88-O ======
- 
  
 === 16-fold feedback modules === === 16-fold feedback modules ===
- 
  
 == 100% compatible with the s88 from our Digital-Professional-Series ! == == 100% compatible with the s88 from our Digital-Professional-Series ! ==
- 
  
 == The feedback modules RM-DEC-88 and RM-DEC-88-O are not anymore available. == == The feedback modules RM-DEC-88 and RM-DEC-88-O are not anymore available. ==
  
- +**Please select the successor modules [[:en:rm-88-n|RM-88-N]] or the [[:en:rm-88-n-o|RM-88-N-O]].**
-Please select the successor modules [[:en:rm-88-n|RM-88-N]] or the [[:en:rm-88-n-o|RM-88-N-O]]. +
  
 {{  :de:foto:rm-dec-88_20_01.jpg  }} {{  :de:foto:rm-dec-88_20_01.jpg  }}
- 
  
 ==== RM-DEC-88 Opto and RM-DEC-88 for MEMORY,  INTERFACE and Intellibox / TWIN-CENTER with 75cm connection cable. ==== ==== RM-DEC-88 Opto and RM-DEC-88 for MEMORY,  INTERFACE and Intellibox / TWIN-CENTER with 75cm connection cable. ====
- 
  
 ====== Features of the RM-DEC-88 and RM-DEC-88-O ====== ====== Features of the RM-DEC-88 and RM-DEC-88-O ======
- 
  
     * For connection to: **INTERFACE** (up to 31 modules), **MEMORY** (up to 3 modules), **Intellibox**/**TWIN-CENTER** (up to 31 modules) and our **High Speed Interface HSI-88** (up to 31 modules).     * For connection to: **INTERFACE** (up to 31 modules), **MEMORY** (up to 3 modules), **Intellibox**/**TWIN-CENTER** (up to 31 modules) and our **High Speed Interface HSI-88** (up to 31 modules).
     * The feedback modules **RM-DEC-88** and **RM-DEC-88 Opto** can be combined with the s88 feedback modules from **Märklin** and other manufacturers as required.     * The feedback modules **RM-DEC-88** and **RM-DEC-88 Opto** can be combined with the s88 feedback modules from **Märklin** and other manufacturers as required.
-    * **Simple and secure** connection of switch rails, contact rails, occupancy sensors or reed-contacts by **screw clips.**+     * **Simple and secure** connection of switch rails, contact rails, occupancy sensors or reed-contacts by **screw clips.**
     * The **RM-DEC-88 Opto** is equipped with additional **opto coupler** and therefore **extremely** protected **against interference**.     * The **RM-DEC-88 Opto** is equipped with additional **opto coupler** and therefore **extremely** protected **against interference**.
-    * Our feedback modules **RM-DEC-88** and **RM-DEC-88 Opto** from our **Digital-Professional-Series** can be operated without any difficulty from your digitally controlled model railroad as these decoders are **100% compatible** with the feedback module **s88**.+     * Our feedback modules **RM-DEC-88** and **RM-DEC-88 Opto** from our **Digital-Professional-Series** can be operated without any difficulty from your digitally controlled model railroad as these decoders are **100% compatible** with the feedback module **s88**.
     * Suitable installation material can be ordered under: [[:en:zubehoer|accessories]].     * Suitable installation material can be ordered under: [[:en:zubehoer|accessories]].
- 
  
 == From the table below you can see which feedback module may be used with the contacts of your model railroad: == == From the table below you can see which feedback module may be used with the contacts of your model railroad: ==
  
- +^Kind of contacts ^ RM-DEC-88 ^ RM-DEC-88 Opto |
-^Kind of contacts ^RM-DEC-88 ^RM-DEC-88 Opto |+
 ^**Circuit-track(3-conductor rail system) **  |  X  |  X  | ^**Circuit-track(3-conductor rail system) **  |  X  |  X  |
 ^**Contact-track (3-conductor rail system) **  |  X  |  X  | ^**Contact-track (3-conductor rail system) **  |  X  |  X  |
 ^**Reed-contact, Occupancy detector with relay output  \\ (2-conductor and 3-conductor rail system) **  |  X  |  X  | ^**Reed-contact, Occupancy detector with relay output  \\ (2-conductor and 3-conductor rail system) **  |  X  |  X  |
 ^**Track contact-switch (2-conductor rail system) **  |  X  |  | ^**Track contact-switch (2-conductor rail system) **  |  X  |  |
-^**Connection cable between contacts and feedback module  \\ more than 2 meters (2-conductor and 3-conductor rail system) **  |  X  |  +^**Connection cable between contacts and feedback module  \\ more than 2 meters (2-conductor and 3-conductor rail system) **  |  X    
-^**Occupancy detector on a 2-conductor rail system (with additional module \\  see description below) Better to use our octal feedback module with \\  integrated  occupancy detection (RM-GB-8-N). **  |  X  |  | +^**Occupancy detector on a 2-conductor rail system \\  (with additional module see description below) \\  Better to use our octal feedback module with \\  integrated  occupancy detection (RM-GB-8-N). **  |  X  |  | 
-^**Turnout-feedback (with additional module- see description below) **  |  X  |  |  \\  +^**Turnout-feedback (with additional module- \\ see description below) **  |  X  |  |  \\  
  
-    * **Track occupancy detection at two-rail 2-conductor systems:**   Contrary to the Märklin 3-conductor rail-system can the occupancy of direct-current rails only be reliably realized with electronic circuitry which measure the current at the track section. For this application is it **recommended to use our 8-fold feedback module with integrated track occupancy monitor**   ([[:en:rm-gb-8-n|RM-GB-8-N]] ). In case you integrated already some occupancy circuits you can combine those with our **feedback modules RM-DEC-88-Opto** provided that the occupancy circuits have no potential-free outputs. Four of such modules can be connected directly to a feedback module **RM-DEC-88-Opto** and report the occupancy situation of 16 track sections to the control unit. If the occupancy monitor has potential-free report outputs (e.g. relay contacts) you can apply our feedback module **RM-DEC-88**.                  +    * **Track occupancy detection at two-rail 2-conductor systems:** Contrary to the Märklin 3-conductor rail-system can the occupancy of direct-current rails only be reliably realized with electronic circuitry which measure the current at the track section. For this application is it **recommended to use our 8-fold feedback module with integrated track occupancy monitor** ([[:en:rm-gb-8-n|RM-GB-8-N]] ). In case you integrated already some occupancy circuits you can combine those with our **feedback modules RM-DEC-88-Opto** provided that the occupancy circuits have no potential-free outputs. Four of such modules can be connected directly to a feedback module **RM-DEC-88-Opto** and report the occupancy situation of 16 track sections to the control unit. If the occupancy monitor has potential-free report outputs (e.g. relay contacts) you can apply our feedback module **RM-DEC-88**.
-    * **Feedback from turnouts:** If you require the feedback of the actual turnout position to the control unit (or personal computer) you can apply our feedback module **RM-DEC-88-Opto**. For further information please attend to our description under [[:en:dl_ldt_old|Feedback of the turnout position]]. +
-    * **Extended connection cable:**  All LDT feedback modules will be supplied ex factory together with a 75 cm interference protected, twisted s88-bus cable.+
  
 +    * **Feedback from turnouts:** If you require the feedback of the actual turnout position to the control unit (or personal computer) you can apply our feedback module **RM-DEC-88-Opto**. For further information please attend to our description under [[:en:dl_rm-dec-88-o_nml|Feedback of the turnout position]].
 +
 +    * **Extended connection cable:** All LDT feedback modules will be supplied ex factory together with a 75 cm interference protected, twisted s88-bus cable.
  
 == Additionally we offer connection cables at low cost: == == Additionally we offer connection cables at low cost: ==
  
-^**ss88-standard connection with 2 original s88-plugs, \\  +^**s88-standard connection with 2 original s88-plugs, \\ gray cable, twisted, round. Plus pin bar for bus extension.**  |
-gray cable, twisted, round. Plus pin bar for bus extension.**  |+
 |[[:en:zubehoer#Extended connection cable for the s88-feedback bus|Kabel s88 0,5m]]  | |[[:en:zubehoer#Extended connection cable for the s88-feedback bus|Kabel s88 0,5m]]  |
 |[[:en:zubehoer#Extended connection cable for the s88-feedback bus|Kabel s88 1m]]  | |[[:en:zubehoer#Extended connection cable for the s88-feedback bus|Kabel s88 1m]]  |
 |[[:en:zubehoer#Extended connection cable for the s88-feedback bus|Kabel s88 2m]]  | |[[:en:zubehoer#Extended connection cable for the s88-feedback bus|Kabel s88 2m]]  |
- 
  
 ====== Downloads ====== ====== Downloads ======
- 
  
 Instructions regarding this not anymore available article can be found here: [[:en:dl_ldt_old|Downloads RM-DEC-88 and RM-DEC-88-O]].\\  Instructions for all LDT-Components can be found here: [[:en:downloads|Übersicht Downloads]]. Instructions regarding this not anymore available article can be found here: [[:en:dl_ldt_old|Downloads RM-DEC-88 and RM-DEC-88-O]].\\  Instructions for all LDT-Components can be found here: [[:en:downloads|Übersicht Downloads]].
- 
  
 ====== Sample-Connections ====== ====== Sample-Connections ======
- 
  
 Sample-connections regarding this not anymore available article can be found here:\\   [[:en:ab_nml|Sample-Connections RM-DEC-88 and RM-DEC-88-O]]. \\  Sample-connections for all LDT-Components can be found here: [[:en:anschlussbeispiele|Overview Sample-Connections]]. Sample-connections regarding this not anymore available article can be found here:\\   [[:en:ab_nml|Sample-Connections RM-DEC-88 and RM-DEC-88-O]]. \\  Sample-connections for all LDT-Components can be found here: [[:en:anschlussbeispiele|Overview Sample-Connections]].
  
- +Subject to technical changes and errors. \\  © 2016 by LDT \\  [[:en:rm-dec-88#rm-dec-88_and_rm-dec-88-o|{{  :de:images:zurueck_en_page.png?40x32}}]] 
-Subject to technical changes and errors. \\  © 2012 by LDT \\  [[:en:rm-dec-88#rm-dec-88_and_rm-dec-88-o|{{  :de:images:zurueck_en_page.png?40x32}}]]  +
  
 \\ \\
- 
 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki Design by Chirripó