Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen gezeigt.
en:tt-dec-r [2017/07/30 12:31] |
en:tt-dec-r [2020/05/31 04:41] (current) |
||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ====== TT-DEC-R ====== | ||
+ | === TurnTable-Decoder for the Roco H0 Turntable 42615 === | ||
+ | |||
+ | == For the digital control of Roco H0 Turntable 42615! Suitable for the digital formats Märklin-Motorola and DCC. == | ||
+ | |||
+ | {{ :de:foto:tt-dec-r_11_01.jpg }} | ||
+ | |||
+ | ====== Features of the TT-DEC-R ====== | ||
+ | |||
+ | The **TurnTable-Decoder TT-DEC-R** is suitable for the digital control of the **Roco H0 Turntable 42615**. | ||
+ | |||
+ | The **Roco H0 turntable 42615** can be equipped with **4 up to 40 track connections**.\\ | ||
+ | **Non-aligned opposite track connection** can be assembled at a **min. of 4,5 degree offset**. | ||
+ | |||
+ | {{ :de:cad:tt-dec-r_11_03_nv.gif}}The **command-set** of the **TT-DEC-R** is **compatible** to the **Märklin Turntable electronic 7686**. Therefore is a **very simple control** via any **Digital Command Station** and **Model railway software** possible, which supports the **Märklin turntable electronic 7686** with a **turntable graphic**. | ||
+ | |||
+ | The **digital format (Märklin-Motorola or DCC)** and the **location of the track connections** are **easily programmable** via any **digital command station** which is able to switch turnouts or via a **model railway software** which supports the **Märklin turntable electronic 7686**. **Any track connection** of the turntable **can be programmed as track 1 (reference track)**. | ||
+ | |||
+ | The **TT-DEC-R** permits the **step by step rotation to the right- or left side, the direct connection of pre-selected tracks** and **turning the movement direction of the turntable by 180 degree**. | ||
+ | |||
+ | The **rotation speed of the turntable** can be **individually adjusted** via a **potentiometer**. The motor of the turntable receives a **stabilized direct voltage** for a **steady turning movement** of the bridge track. | ||
+ | |||
+ | **The plug of the 8-poles flat ribbon cable of the Roco H0 turntable 42615** shall be plugged **directly** onto the **pin-plug bar** of the **TT-DEC-R**. | ||
+ | |||
+ | The **bridge track receives** the**correct polarity** from an **integrated switch-over relay**. Therefore is **no additional reverse loop module** for the bridge track required. | ||
+ | |||
+ | If the **turntable will be in the lined-up track position** this can be **reported** to the **model railway software** via the **feedback output** of the **Turntable-Decoder TT-DEC-R**. | ||
+ | |||
+ | There **no alteration required** on the **Roco H0 Turntable 42615**. There are only **two small electrical adaption** necessary. After **completion of the electrical adaption** is it **not anymore possible to control the Roco Turntable 42615** by **use of the Roco manual control unit**. | ||
+ | |||
+ | The finished module in a case comes with **24 month warranty**.\\ | ||
+ | Each **TurnTable-Decoder TT-DEC-R** will be supplied with a detailed operating-/ assembly instruction. Those instructions can be found within the next section. | ||
+ | |||
+ | The **TT-DEC-R** is available as a **kit (-B)** or as checked **finished module in a case (-G)**. Suitable **assembly material** for the kit is available under [[:en:zubehoer|Accessories]]. | ||
+ | |||
+ | ====== Downloads ====== | ||
+ | |||
+ | Instructions regarding this article can be found here: [[:en:dl_tt_dec_r|Downloads TT-DEC-R]].\\ Instructions for all LDT-Components can be found here: [[:en:downloads|Overview Downloads]]. | ||
+ | |||
+ | ====== Sample-Connections ====== | ||
+ | |||
+ | Sample-connections regarding this article can be found here: [[:en:ab_tt_dec_r_roco|Sample-Connections TT-DEC-R]].\\ | ||
+ | Sample-connections for all LDT-Components can be found here: [[:en:anschlussbeispiele|Overview Sample-Connections]].\\ | ||
+ | {{ :de:cad:page_1241.gif }} | ||
+ | |||
+ | ====== Add to Wish List / Prices ====== | ||
+ | |||
+ | **Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.** | ||
+ | |||
+ | ^{{:de:images:noticelist_m.png}} |\\ <html>Add to <b><u class="linkit" onclick="toNoticeList('010511');">Wish List</u></b></html>:**TT-DEC-R-B** (Part-No.: 010511): **TurnTable-Decoder** as a **kit** (**82,90 €***).\\ <html>Add to <b><u class="linkit" onclick="toNoticeList('010513');">Wish List</u></b></html>:**TT-DEC-R-G** (Part-No.: 010513): **TurnTable-Decoder** as a **finished module in a case** (**124,90 €***).\\ {{:de:images:blindgif.gif?580x1}} \\ ** * All prices incl. VAT, plus Shipping.** | | ||
+ | |||
+ | [[:en:tt-dec-r#tt-dec-r|{{ :de:images:zurueck_en_page.png?40x32}}]] Subject to technical changes and errors.\\ | ||
+ | © 2020 by LDT |