• If you want to use our low-cost DigitalBooster DB-2 as well on a Roco- or Fleischmann command stations (Roco Part-No. 10761 and 10764 / Fleischmann Part-No. 680801) or multiZENTRALEpro you can apply now the Adapters Adap-Roco.
• Up to 10 DigitalBoosters DB-2 can be connected to each Adapter Adap-Roco.
• Opto-couplers at the Adapter Adap-Roco will provide a galvanical separation between booster and command station 10761/10764 and will therefore assure a safe electrical operation.
• Each Booster Adapter Adap-Roco will be supplied with a detailed operating- /respectively assembly instruction. Those instructions can be found within the next section.
• The finished module comes with 24 month warranty.
• The Adapter Adap-Roco will be supplied as tested finished module in a case (-G).

Each Adapter Adap-Roco will be supplied together with a cable for the connection to the command station 10761/10764.

Instructions regarding this not anymore available article can be found here: Downloads Adap-Roco.
Instructions for all LDT-Components can be found here: Overview Downloads.

Sample-connections regarding this not anymore available article can be found here: Sample-Connections Adap-Roco.
Sample-connections for all LDT-Components can be found here: Overview Sample-Connections.

Subject to technical changes and errors.
© 2022 by LDT