Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

en:neuheiten [2012/12/03 20:37]
ldt_kahrs
en:neuheiten [2018/04/20 14:32] (current)
Line 1: Line 1:
 ====== Digital-Novelties from LDT! ====== ====== Digital-Novelties from LDT! ======
  
 +====== Digital-Novelties 2018: ======
  
-====== Digital-Novelities 2012======+Introduced to the **Toy-Fair 2018**:
  
 +Our **Novelty-information 2018** is available for downloading [[:en:dl_ldt_doc|here]]!
  
-Our Digital Novelities 2012, introduced at the Toy Fair in Nuremberg from 1till 6. February:+== LS-DEC-CSD: Light-Signal Decoder for up to 4 Light signals of the Czechoslovakian National Railway (CSD)==
  
 +{{  :de:foto:ls-dec-csd_with_loco_and_signal_ic.jpg?350}} 
 +Via the **Light-Signal Decoder LS-DEC-CSD** is the connection and digital control of either four CSD departure signals, home signals, advance signals as well as shunting signals possible. \\  \\  
  
-Our **Novelty-information 2012** (in German language only) is available for downloading [[:en:dl_ldt_doc|here]]!+Available ex warehouse.
  
 +**> To product description:** [[:en:ls-dec-csd|LS-DEC-CSD]]
  
-== DSW-88-NData switch available now for the bus connection accto s88-N ==+[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
-{{  :de:foto:dsw-88-n_10_01.jpg?350x263}}Normally the s88-feedback bus expects all connected feedback modules behind each others in one line. The data switch DSW-88-N provides the possibility to split the s88-feedback output! \\   
-The data switch DSW-88-N provides in addition three 6-poles pin bars for the s88 standard connection and as well three RJ-45 sockets for a bus connection according to s88-N. 
  
 +== LS-DEC-8x2: Light-Signal Decoder for eight 2-aspect light signals. ==
 +
 +{{  :de:foto:ls-dec-8x2-g_ic.jpg?350}} 
 +With the **Light-Signal Decoder LS-DEC-8x2** is it possible to switch up to eight 2-aspect light sinals. \\  \\  
  
 Available ex warehouse. Available ex warehouse.
  
 +**> To product description:** [[:en:ls-dec-8x2|LS-DEC-8x2]]
  
-**> To product description:** [[:en:dsw-88-n|DSW-88-N]] +[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
  
-[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]] 
  
  
-== LS-DEC-BRLight-Signal Decoder for British Railway Light-Signals ==+====== Digital-Novelties 2017======
  
 +Introduced to the **Toy-Fair 2017**:
  
-{{  :de:foto:ls-dec-br_41_01.jpg?350x263}}Via the Light-Signal-Decoder LS-DEC-BR is the connection and control of either four 2- to 4-aspect signals or two 2- to 4-aspect signals with feather possible.+Our **Novelty-information 2017** is available for downloading [[:en:dl_ldt_doc|here]]!
  
 +== LS-DEC-CFL: Light-Signal Decoder for up to 4 Light signals of the National Railway Company of Luxembourg, CFL. ==
 +
 +{{  :de:foto:ls-dec-cfl_with_loco_and_signal_ic.jpg?350}} 
 +Via the **Light-Signal Decoder LS-DEC-CFL** is the connection and digital control of either four CFL main-, advance- or line-close signals or two combined main-/line-close signals possible. \\  \\  
  
 Available ex warehouse. Available ex warehouse.
  
- +**> To product description:** [[:en:ls-dec-cfl|LS-DEC-CFL]]
-**> To product description:** [[:en:ls-dec-br|LS-DEC-BR]]  +
  
 [[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]] [[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
  
-== LS-DEC-KS: Light-Signal Decoder for Ks-Signals with up to 16 Signal-Aspects ==+== LS-DEC-USA: Light-Signal Decoder for up to 4 American Color Light signals. ==
  
 +{{  :de:foto:ls-dec-usa_with_loco_and_signal_ic.jpg?350}} 
 +With the **Light-Signal Decoder LS-DEC-USA** is it possible to switch digital up to four 2- or 3-aspect American Color Light Signals.  \\  \\  
  
-{{  :de:foto:ls-dec-ks_41_01.jpg?350x263}}Via the Light-Signal-Decoder LS-DEC-KS is the digital switching of two Ks-Signals of the Ks-Signalsystem from the Deutsche Bundesbahn possible. It is possible to connect and control Ks-Entry, Ks-Exit, Ks-Advance-Signals and as well Ks-Entry- and Ks-Exit-Multiple-Section-Signals with up to 16 Signal-Aspects.+Available ex warehouse.
  
 +**> To product description:** [[:en:ls-dec-usa|LS-DEC-USA]]
  
-Available ex warehouse.+[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
  
-**> To product description:** [[:en:ls-dec-ks|LS-DEC-KS ]]  
  
 +====== Digital-Novelties 2016: ======
  
-[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]+Introduced at the **Toy-Fair 2016**:
  
 +Our **Novelty-information 2016** is available for downloading [[:en:dl_ldt_doc|here]]!
  
-====== Digital-Novelties 2011======+== Light-DECUniversal Layout-Light-Control for analogue and digital model railways which are operating self-sufficient with or without PC or digital command station. ==
  
 +{{  :de:foto:light-basis_light-dispaly_ic.jpg?350}} 
 +Various light functions can be assigned to up to 160 light outputs and can control automatically those functions throughout the day or they can be activated or deactivated via push buttons or DCC-commands. \\  \\  
 +The Layout-Light-Control **Light-DEC** is modular designed and can be therefore optimal adapted to any layout size and to any individual requirement at low cost.  \\  \\  
 +It consist of the new **Light-DEC-Basic-Module** (at the picture right) and as minimum one **Light-Module** (Light-Display – at the picture left - or Light-Power) which has to be plugged to the side of the Basic-Module.  \\  
  
-Our **Novelty-information 2011** (in German language only) is available for downloading [[:en:dl_ldt_doc|here]]!+Available ex warehouse.
  
 +**> To product description:** [[:en:light-dec|Light-DEC]]
  
-== BTM-SGBooster Keep Separate Module ==+[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
  
-{{  :de:foto:btm-sg_11_01.jpg?350x277}}The Booster Keep Separation Module BTM-SG provides a secure electrical separation of Booster Circuits. A switch-over track, situated between two booster circuits as separation section will receive only from one booster digital current supply depending to the travelling direction of the train. +====== Digital-Novelties 2015======
  
  
-Available ex warehouse.+Our **Novelty-information 2015** is available for downloading [[:en:dl_ldt_doc|here]]!
  
 +== Light@Night: Extension with RJ-45 sockets of the Module Light-Display and Light-Power for the layout light control to enable installation at greater distances with an interference protected patch cable. ==
  
-**> To product description:** [[:en:btm-sg|BTM-SG]] +{{  :de:foto:light-display_18_ic.jpg?350}} \\   
 +If the **Light-Module** of the **PC-light control Light@Night** shall be assembled at a greater distance to be closer to the light sources in the past the **Kabel Light@Night** with the length of 0.5m, 1m and 2m has been used. \\  \\  
  
 +For covering in future **greater distances free from interferences** the **light module** are now **equipped with RJ-45 sockets**. Now is it possible to use **screened interference protected Patch-Cable** (computer network cable) to connect various module.  \\   \\  \\  
  
-[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]+{{  :de:foto:light-power_12_ic.jpg?350}} \\  
  
  
-== RS-8-G: Now as well available as finished module in a case ==+Available ex warehouse. 
  
 +**> To product description:** [[:en:lightatnight|Light@Night]]
  
-{{  :de:foto:rs-8_32_01.jpg?350x283}}The 8-fold Feedback Module RS-8 contains integrated track occupancy sensors. This module is suitable for monitoring isolated track sections which receive digital current from the RS-8. The design of the RS-8 is suitable for the application at the RS-Feedback Bus of the Digital plus System of company Lenz. The RS-8 is now available as finished module in a case under order code RS-8-G.+[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
 +== LS-DEC-SNCF: Light-Signal Decoder for light signals of the French State Railway Company - Société Nationale des Chemins de fer Français (SNCF) ==
  
-Available ex warehouse.+{{  :de:foto:ls-dec-sncf-g_41_ic.jpg?350}}Via the Light-Signal Decoder LS-DEC-SNCF is the connection and control of either four 2- to 4-aspect signals or two up to 16-aspect SNCF-signals possible
  
  
-**> To product description:** [[:en:rs-8|RS-8]] +Available ex warehouse. 
  
 +**> To product description:** [[:en:ls-dec-sncf|LS-DCE-SNCF]]
  
-[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]+[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]] 
  
  
-== TT-DEC-RTurntable-Decoder for the Roco H0 Turntable 42615 ==+====== Digital-Novelties 2014======
  
  
-{{  :de:foto:tt-dec-r_11_01.jpg?350x331}}The Turntable-Decoder TT-DEC-R is suitable for the digital drive of the Roco H0 Turntable 42615.+== Be a Digital-Professional : The unique digital book for the beginner and for the advanced model rail-roader ==
  
 +{{  :de:foto:buch_digital_profi_werden.gif?280}}
  
-Available ex warehouse.+**Driving – Switching – Feedback  **  \\ 
 +**Author: Henning Kriebel**
  
 +**Sample of contents:**
 +    * Short and understandable: digital data transfer;  \\
 +    * No problem: two- or three-conductor systems within the digital controlled operation;  \\
 +    * Booster on small and bigger layouts;  \\
 +    * Switching of turnouts, signals and illumination;  \\
 +    * Control of turntables;  \\
 +    * Feedback reports of two- and three-conductor systems;  \\
 +    * Fast feedback reports via High Speed Interfaces (HSI);  \\
 +    * Simple solutions of reverse loop problems.  \\
  
-**> To product description:** [[:en:tt-dec-r|TT-DEC-R ]] +And many more issues.\\   
 +164 pages with 171 illustrations and 10 graphics  \\ 
 +**(available in German language only!)**.\\  \\   
 +Available ex warehouse.  \\  
  
 +**> To product description:** [[:en:wissen#digital book|Be a Digital-Professional ]] 
  
 [[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]] [[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
  
-====== Digital-Novelities 2010======+== 1-DEC-DCDecoder for single coil turnouts (e.g. LGB, Piko G, Kato Unitrack, Tomix, Rokuhan) is now available as finished module in a case ==
  
 +{{  :de:foto:1-dec-dc-g_20_ic.jpg?350}}With the 1-DEC-DC is the digital control of up to 4 single coil turnout drives (e.g. LGB, Piko G, Kato Unitrack, Tomix, Rokuhan) possible.
  
-Our **Novelty-information 2010** (in German language only) is available for downloading [[:en:dl_ldt_doc|here]]!+The switching current of each output can be up to 1 Ampere. The drives will be switched with a short impulse. Therefore can be drives with or without final disconnection used.
  
 +Till now was the 1-DEC-DC as a kit and as a finished module available, **from now on is it as well as a finished module in a case available**.
  
-== Adap-HSI-s88-N: Adapter for the Interfaces HSI-88, HSI-88-USB and DiCoStation for s88-Bus-connection according to s88-N ==+Available ex warehouse.
  
 +**> To product description:** [[:en:1-DEC-DC|1-DEC-DC]]
  
-{{  :de:foto:adap-hsi-s88-n_01.jpg?350x318}}The Adapter Adap-HSI-s88-N enables to connect s88-Feedbackmodules such as [[:en:rm-88-n|RM-88-N]], [[:en:rm-88-n-o|RM-88-N-O]] and [[:en:rm-gb-8-n|RM-GB-8-N]] according to s88-N  directly to the Interfaces [[:en:hsi-88|HSI-88]], [[:en:hsi-88-usb|HSI-88-USB]] and [[:en:dicostation|DiCoStation]] via the screened [[:en:zubehoer#Connection cable for s88-connections according to s88-N|Patch-Kabel]].+[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
-Available ex warehouse. 
  
 +== M-DEC: Decoder for motor (turnout-) drives (e.g. Fulgurex, Hoffmann, Conrad, Tillig, BEMO) is now available as finished module in a case ==
  
-**> To product description:** [[:en:adap-hsi-s88-n|Adap-HSI-s88-N]] +{{  :de:foto:m-dec-dc-g_20_ic.jpg?350}}The Decoder M-DEC supplies on all 4 outputs the drive voltage for motor driven turnouts. 
  
 +The motor voltage will be polarized in accordance to the switching direction. The motor current can be up to 1 Ampere. 
  
-[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]] +Therefore can be motor driven turnout drives e.g. Fulgurex, Hoffmann, Conrad, Tillig and BEMO digital controlled without problems
  
 +Till now where the Decoder M-DEC-MM for the Märklin-Motorola-data format and M-DEC-DC for the DCC-data format available as a kit and as a finished module. **From now on are those Decoders available as well as a finished module in a case**.
  
-== DB-4: DigitalBooster with 2,5 or 4,5 Ampere plus additional features ==+Available ex warehouse.
  
 +**> To product description:** [[:en:M-DEC|M-DEC]]
  
-{{  :de:foto:db-4_13_01.jpg?350x278}}The DigitalBooster DB-4 provides 2,5 or 4,5 Ampere digital current and supports the digital formats Märklin-Motorola and DCC. With the galvanic separated booster bus connection (5-poles-, CDE- and Roco-booster bus) is it possible to use it on several command stations.+[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
  
-Available ex warehouse.+== SupplyBox SB-4: Practical unit for the direct current supply from switched mode mains power supply ==
  
 +{{  :de:foto:sb-4-g_10_ic.jpg?350}}Nowadays the classical model railway transformer will not be used anymore. As a replacement will now be switched mode power supply units used. 
  
-**> To product description:** [[:en:db-4|DB-4]] +The switched mode power supplies have a connected plug which shall probably not to be removed.  
 + 
 +The alternative will be the SupplyBox SB-4
  
 +Available ex warehouse. 
 +
 +**> To product description:** [[:en:sb-4|SB-4]]
  
 [[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]] [[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
-== LI-LAN: LAN-Interface (PC-Netzwork) for Light-Control Light-at-Night == 
  
 +====== Digital-Novelties 2013: ======
  
-{{  :de:foto:li-lan_10_01.jpg?350x263}}The Light-Interface LI-LAN is a PC-Network-Interface for the Model Railway Layout- and Ambient-Room Light-Control Light@Night. 
  
 +== s88-ClockMaster: As a supplement to the Switch Board Light Decoder GBS-DEC-s88 to be used for operation without a digital command station. ==
  
 +{{  :de:foto:s88-clockmaster-g_11_ic.jpg?350}}If the lights of the track elements of a Switch Board Light Panel shall be controlled by the Switch Board Light-Decoder GBS-DEC-s88 without connection to a digital command station or without a PC with Model Railway Software a timing generator for the s88 Feedback bus will be required. This task will be provided by the new s88-ClockMaster.
  
 Available ex warehouse. Available ex warehouse.
  
  
-**> To product description:** [[:en:lightatnight|LI-LAN]] +**> To product description:** [[:en:s88-clockmaster|s88-ClockMaster]] 
  
  
 [[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]] [[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
 +== KeyCommander: Functional extension for up to 16 drive ways ==
  
-== LDT-02: Enpty Case for the DigitalBooster DB-4 and the Feedback-Module RM-GB-8-N == 
  
 +{{  :de:foto:keycom-dc-g_11_ic.jpg?350}}With the KeyCommander (KeyCom), available by us for several years, is it now possible to benefit from the advantage of the simple and reduced wiring of a digital layout even on your analogue layouts. Previously was it possible to program up to 8 drive ways. After the functional extension is it now possible to program max. 16 drive ways with up to 16 switch commands on each Rail-Road.
  
-{{  :de:foto:ldt-02_01.jpg?350x275}}Empty case for the DigitalBooster DB-4 and the 8-fold Feedback-Module RM-GB-8-N. 
  
 Available ex warehouse. Available ex warehouse.
  
 +**> To product description:** [[:en:keycom|KeyCommander]] 
  
-**> To product description:** [[:en:zubehoer#case_ldt-02|LDT-02]] +[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
  
-[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]] +== LS-DEC-FSLight-Signal Decoder for light signals of the Governmental Railway Corporation of Italy – Ferrovie dello Stato (FS) ==
  
  
-== RM-GB-8-N-G: The 8-fold Feedback-Module with integrated track occupancy report is now available as finished module in a case ==+{{  :de:foto:ls-dec-fs-g_41_ic.jpg?350}}With the Light-Signal Decoder LS-DEC-FS is the digital switching of up to four 3- to 4- aspect signals or up to two 11-aspect signals of the company **Essemme S.r.l. (Mailand, Italien)** possible.
  
 +Available ex warehouse.
  
-{{  :de:foto:rm-gb-8-n_11_01.jpg?350x263}}The 8-fold Feedback-Module with integrated track occupancy report (novelty 2009) is now available as finished module in a case LDT-02.+**> To product description:** [[:en:ls-dec-fs|LS-DEC-FS ]] 
  
 +[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
-Available ex warehouse.+== LS-DEC-SJ: Light-Signal Decoder for light signals of the Swedish State Railway (SJ) ==
  
  
-**> To product description:** [[:en:rm-gb-8-n|RM-GB-8-N]] +{{  :de:foto:ls-dec-sj-g_41_ic.jpg?350}}With the Light-Signal Decoder LS-DEC-SJ is the digital switching of up to four Hsi2- or Hsi3-Light Signals with 2- or 3- signal aspects or up to two Fsi2-, Fsi3-, Hsi4- or Hsi5- Light Signals with 2- to 7- signal aspects possible. 
  
 +Available ex warehouse.
 +
 +**> To product description:** [[:en:ls-dec-sj|LS-DEC-SJ ]] 
  
 [[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]] [[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
  
-====== Digital-Novelties 2009: ======+====== Digital-Novelties 2012: ======
  
  
-== KSM-SG: Reverse-Loop Module for digital operation (all formats) ==+== DSW-88-N: Data switch available now for the bus connection acc. to s88-N ==
  
 +{{  :de:foto:dsw-88-n_10_01.jpg?350x263}}Normally the s88-feedback bus expects all connected feedback modules behind each others in one line. The data switch DSW-88-N provides the possibility to split the s88-feedback output! \\  
  
-{{  :de:foto:ksm-sg_10_01.jpg?350x276}}Reverse-Loop Module with short circuit protected polar reversal via 2 sensor tracks. With reason to an external power supply possibility is a simple combination with feedback module with integrated track occupancy report (e.g. RM-GB-8(-N) and RS-8) possible for the control of the reverse-loop. +The data switch DSW-88-N provides in addition three 6-poles pin bars for the s88 standard connection and as well three RJ-45 sockets for a bus connection according to s88-N.
  
 Available ex warehouse. Available ex warehouse.
  
  
-**> To product description:** [[:en:ksm-sg|KSM-SG ]] +**> To product description:** [[:en:dsw-88-n|DSW-88-N]] 
  
  
-[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]] +[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
 +== LS-DEC-BR: Light-Signal Decoder for British Railway Light-Signals ==
  
-== RM-88-N: 16-fold Standard-Feedback Module for the s88-feedback bus for s88-standard connections and s88-N == 
  
- +{{  :de:foto:ls-dec-br_41_01.jpg?350x263}}Via the Light-Signal-Decoder LS-DEC-BR is the connection and control of either four 2to 4-aspect signals or two 2to 4-aspect signals with feather possible.
-{{  :de:foto:rm-88-n_10_01.jpg?350x278}}16-fold Standard-Feedback Module (switching against ground) for s88-standard connections via 6-poles s88-pin bars or s88-N via RJ-45 sockets.+
  
  
 Available ex warehouse. Available ex warehouse.
  
- +**> To product description:** [[:en:ls-dec-br|LS-DEC-BR]] 
-**> To product description:** [[:en:rm-88-n|RM-88-N]]  +
  
 [[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]] [[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
  
-== RM-88-N-O16-fold Feedback Module with Opto-Coupling inputs for the s88-feedback bus for s88-standard connections and s88-==+== LS-DEC-KSLight-Signal Decoder for Ks-Signals with up to 16 Signal-Aspects ==
  
  
-{{  :de:foto:rm-88-n-o_10_01.jpg?350x268}}16-fold Feedback Module with opto-coupling inputs for potential separation and for high interference protection +{{  :de:foto:ls-dec-ks_41_01.jpg?350x263}}Via the Light-Signal-Decoder LS-DEC-KS is the digital switching of two Ks-Signals of the Ks-Signalsystem from the Deutsche Bahn possibleIt is possible to connect and control Ks-Entry, Ks-Exit, Ks-Advance-Signals and as well Ks-Entry- and Ks-Exit-Multiple-Section-Signals with up to 16 Signal-Aspects.
-For s88-standard connections via 6-poles s88-pin bars or s88-N via RJ-45 sockets.+
  
 Available ex warehouse. Available ex warehouse.
  
 +**> To product description:** [[:en:ls-dec-ks|LS-DEC-KS ]] 
  
-**> To product description:** [[:en:rm-88-n-o|RM-88-N-O]] +[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
 +====== Digital-Novelties 2011: ======
  
-[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]] 
  
 +== BTM-SG: Booster Keep Separate Module ==
  
-== RM-GB-8-N: 8-fold Feedback Module with integrated track occupancy report for the s88-feedback bus for s88-standard connections and s88-N ==+{{  :de:foto:btm-sg_11_01.jpg?350x277}}The Booster Keep Separation Module BTM-SG provides a secure electrical separation of Booster Circuits. A switch-over track, situated between two booster circuits as separation section will receive only from one booster digital current supply depending to the travelling direction of the train. 
  
 +Available ex warehouse.
  
-{{  :de:foto:rm-gb-8-n-f_10_01.jpg?350x338}}8-fold Feedback Module with integrated track occupancy report for s88-standard connections via 6-poles s88-pin bars or s88-N via RJ-45 sockets.+**> To product description:** [[:en:btm-sg|BTM-SG]] 
  
 +[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
 +== RS-8-G: Now as well available as finished module in a case ==
 +
 +{{  :de:foto:rs-8_32_01.jpg?350x283}}The 8-fold Feedback Module RS-8 contains integrated track occupancy sensors. This module is suitable for monitoring isolated track sections which receive digital current from the RS-8. The design of the RS-8 is suitable for the application at the RS-Feedback Bus of the Digital plus System of company Lenz. The RS-8 is now available as finished module in a case under order code RS-8-G.
  
 Available ex warehouse. Available ex warehouse.
  
 +**> To product description:** [[:en:rs-8|RS-8]] 
  
-**> To product description:** [[:en:rm-gb-8-n|RM-GB-8-N]] +[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
 +== TT-DEC-R: Turntable-Decoder for the Roco H0 Turntable 42615 ==
  
-[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]+{{  :de:foto:tt-dec-r_11_01.jpg?350x331}}The Turntable-Decoder TT-DEC-R is suitable for the digital drive of the Roco H0 Turntable 42615.
  
 +Available ex warehouse.
  
-====== Digital-Novelties 2008======+**> To product description:** [[:en:tt-dec-r|TT-DEC-R ]] 
  
 +[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
-== HSI-88-USB: High Speed Interface for the USB-Port == 
  
 +====== Digital-Novelties 2010: ======
  
-{{  :de:foto:hsi-88-usb_10_01.jpg?350x263}}High Speed Interface for the s88-Feedback bus! Transmits the Feedback-Information from the s88-Feedback-bus without any detours directly via the command station and the USB-Interface to the PC.+ 
 +== Adap-HSI-s88-N: Adapter for the Interfaces HSI-88, HSI-88-USB and DiCoStation for s88-Bus-connection according to s88-N == 
 + 
 +{{  :de:foto:adap-hsi-s88-n_01.jpg?350x318}}The Adapter Adap-HSI-s88-N enables to connect s88-Feedbackmodules such as [[:en:rm-88-n|RM-88-N]], [[:en:rm-88-n-o|RM-88-N-O]] and [[:en:rm-gb-8-n|RM-GB-8-N]] according to s88-N  directly to the Interfaces [[:en:hsi-88|HSI-88]], [[:en:hsi-88-usb|HSI-88-USB]] and [[:en:dicostation|DiCoStation]] via the screened [[:en:zubehoer#Connection cable for s88-connections according to s88-N|Patch-Kabel]].
  
 Available ex warehouse. Available ex warehouse.
  
 +**> To product description:** [[:en:adap-hsi-s88-n|Adap-HSI-s88-N]] 
  
-**> To product description:** [[:en:hsi-88-usb|HSI-88-USB]] +[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]] 
  
 +== DB-4: DigitalBooster with 2,5 or 4,5 Ampere plus additional features ==
  
-[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]+{{  :de:foto:db-4-g_14_ic.jpg?350}}The DigitalBooster DB-4 provides 2,5 or 4,5 Ampere digital current and supports the digital formats Märklin-Motorola and DCC. With the galvanic separated booster bus connection (5-poles-, CDE- and Roco-booster bus) is it possible to use it on several command stations.
  
 +Available ex warehouse.
  
-== TT-DECTurnTable-Decoder ==+**> To product description:** [[:en:db-4|DB-4]] 
  
 +[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
-{{  :de:foto:tt-dec_12_01.jpg?350x329}}The Turntable-Decoder TT-DEC is suitable for the digital control of Fleischmann-Turntable 6052, 6152, 6154, 6651, 9152, 6680 (each with and without "C"), 6652 (with 3-rail conductor), the Roco-Turntable 35900 and the Märklin-Turntable 7286. Mechanical alterations at the turntable are not required!+== LI-LANLAN-Interface (PC-Netzworkfor Light-Control Light-at-Night ==
  
 +{{  :de:foto:li-lan_10_01.jpg?350x263}}The Light-Interface LI-LAN is a PC-Network-Interface for the Model Railway Layout- and Ambient-Room Light-Control Light@Night.
  
 Available ex warehouse. Available ex warehouse.
  
- +**> To product description:** [[:en:lightatnight|LI-LAN]] 
-**> To product description:** [[:en:tt-dec|TT-DEC]]  +
  
 [[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]] [[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]]
  
 +== LDT-02: Enpty Case for the DigitalBooster DB-4 and the Feedback-Module RM-GB-8-N ==
  
-== LS-DEC-NMBSLight-Signal Decoder for Belgian NMBS-Lightsignals ==+{{  :de:foto:ldt-02_01.jpg?350x275}}Empty case for the DigitalBooster DB-4 and the 8-fold Feedback-Module RM-GB-8-N.
  
 +Available ex warehouse.
  
-{{  :de:foto:ls-dec-nmbs_41_01.jpg?350x263}}Lightsignal-Decoder for Home Signals with 4 or 5 lamps and Shunting Signals of the National Maatschapping of the Belgian Spoorwegen  (NMBS).+**> To product description:** [[:en:zubehoer#case_ldt-02|LDT-02]] 
  
-Available ex warehouse.+[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]] 
  
 +== RM-GB-8-N-G: The 8-fold Feedback-Module with integrated track occupancy report is now available as finished module in a case ==
  
-**> To product description:** [[:en:ls-dec-nmbs|LS-DEC-NMBS]] +{{  :de:foto:rm-gb-8-n_11_01.jpg?350x263}}The 8-fold Feedback-Module with integrated track occupancy report (novelty 2009) is now available as finished module in a case LDT-02.
  
 +Available ex warehouse.
  
-[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]] Subject to technical changes and errors.\\  © 2012 by LDT+**> To product description:** [[:en:rm-gb-8-n|RM-GB-8-N]] 
  
 +[[:en:neuheiten#Digital-Novelties_from_ldt|{{:de:images:zurueck_en_page3_650x36.png}}]] Subject to technical changes and errors.\\  © 2018 by LDT
 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki Design by Chirripó