Digital-Novelties from LDT!
Digital-Novelties 2018:
Introduced to the Toy-Fair 2018:
Our Novelty-information 2018 is available for downloading here!
LS-DEC-CSD: Light-Signal Decoder for up to 4 Light signals of the Czechoslovakian National Railway (CSD).
Via the Light-Signal Decoder LS-DEC-CSD is the connection and digital control of either four CSD departure signals, home signals, advance signals as well as shunting signals possible.
Available ex warehouse.
> To product description: LS-DEC-CSD
LS-DEC-8x2: Light-Signal Decoder for eight 2-aspect light signals.
With the Light-Signal Decoder LS-DEC-8×2 is it possible to switch up to eight 2-aspect light sinals.
Available ex warehouse.
> To product description: LS-DEC-8x2
Digital-Novelties 2017:
Introduced to the Toy-Fair 2017:
Our Novelty-information 2017 is available for downloading here!
LS-DEC-CFL: Light-Signal Decoder for up to 4 Light signals of the National Railway Company of Luxembourg, CFL.
Via the Light-Signal Decoder LS-DEC-CFL is the connection and digital control of either four CFL main-, advance- or line-close signals or two combined main-/line-close signals possible.
Available ex warehouse.
> To product description: LS-DEC-CFL
LS-DEC-USA: Light-Signal Decoder for up to 4 American Color Light signals.
With the Light-Signal Decoder LS-DEC-USA is it possible to switch digital up to four 2- or 3-aspect American Color Light Signals.
Available ex warehouse.
> To product description: LS-DEC-USA
Digital-Novelties 2016:
Introduced at the Toy-Fair 2016:
Our Novelty-information 2016 is available for downloading here!
Light-DEC: Universal Layout-Light-Control for analogue and digital model railways which are operating self-sufficient with or without PC or digital command station.
Various light functions can be assigned to up to 160 light outputs and can control automatically those functions throughout the day or they can be activated or deactivated via push buttons or DCC-commands.
The Layout-Light-Control Light-DEC is modular designed and can be therefore optimal adapted to any layout size and to any individual requirement at low cost.
It consist of the new Light-DEC-Basic-Module (at the picture right) and as minimum one Light-Module (Light-Display – at the picture left - or Light-Power) which has to be plugged to the side of the Basic-Module.
Available ex warehouse.
> To product description: Light-DEC
Digital-Novelties 2015:
Our Novelty-information 2015 is available for downloading here!
Light@Night: Extension with RJ-45 sockets of the Module Light-Display and Light-Power for the layout light control to enable installation at greater distances with an interference protected patch cable.
If the Light-Module of the PC-light control Light@Night shall be assembled at a greater distance to be closer to the light sources in the past the Kabel Light@Night with the length of 0.5m, 1m and 2m has been used.
For covering in future greater distances free from interferences the light module are now equipped with RJ-45 sockets. Now is it possible to use screened interference protected Patch-Cable (computer network cable) to connect various module.
Available ex warehouse.
> To product description: Light@Night
LS-DEC-SNCF: Light-Signal Decoder for light signals of the French State Railway Company - Société Nationale des Chemins de fer Français (SNCF)
Via the Light-Signal Decoder LS-DEC-SNCF is the connection and control of either four 2- to 4-aspect signals or two up to 16-aspect SNCF-signals possible.
Available ex warehouse.
> To product description: LS-DCE-SNCF
Digital-Novelties 2014:
Be a Digital-Professional : The unique digital book for the beginner and for the advanced model rail-roader
Driving – Switching – Feedback
Author: Henning Kriebel
Sample of contents:
- Short and understandable: digital data transfer;
- No problem: two- or three-conductor systems within the digital controlled operation;
- Booster on small and bigger layouts;
- Switching of turnouts, signals and illumination;
- Control of turntables;
- Feedback reports of two- and three-conductor systems;
- Fast feedback reports via High Speed Interfaces (HSI);
- Simple solutions of reverse loop problems.
And many more issues.
164 pages with 171 illustrations and 10 graphics
(available in German language only!).
Available ex warehouse.
> To product description: Be a Digital-Professional
1-DEC-DC: Decoder for single coil turnouts (e.g. LGB, Piko G, Kato Unitrack, Tomix, Rokuhan) is now available as finished module in a case
With the 1-DEC-DC is the digital control of up to 4 single coil turnout drives (e.g. LGB, Piko G, Kato Unitrack, Tomix, Rokuhan) possible.
The switching current of each output can be up to 1 Ampere. The drives will be switched with a short impulse. Therefore can be drives with or without final disconnection used.
Till now was the 1-DEC-DC as a kit and as a finished module available, from now on is it as well as a finished module in a case available.
Available ex warehouse.
> To product description: 1-DEC-DC
M-DEC: Decoder for motor (turnout-) drives (e.g. Fulgurex, Hoffmann, Conrad, Tillig, BEMO) is now available as finished module in a case
The Decoder M-DEC supplies on all 4 outputs the drive voltage for motor driven turnouts.
The motor voltage will be polarized in accordance to the switching direction. The motor current can be up to 1 Ampere.
Therefore can be motor driven turnout drives e.g. Fulgurex, Hoffmann, Conrad, Tillig and BEMO digital controlled without problems.
Till now where the Decoder M-DEC-MM for the Märklin-Motorola-data format and M-DEC-DC for the DCC-data format available as a kit and as a finished module. From now on are those Decoders available as well as a finished module in a case.
Available ex warehouse.
> To product description: M-DEC
SupplyBox SB-4: Practical unit for the direct current supply from switched mode mains power supply
Nowadays the classical model railway transformer will not be used anymore. As a replacement will now be switched mode power supply units used.
The switched mode power supplies have a connected plug which shall probably not to be removed.
The alternative will be the SupplyBox SB-4.
Available ex warehouse.
> To product description: SB-4
Digital-Novelties 2013:
s88-ClockMaster: As a supplement to the Switch Board Light Decoder GBS-DEC-s88 to be used for operation without a digital command station.
If the lights of the track elements of a Switch Board Light Panel shall be controlled by the Switch Board Light-Decoder GBS-DEC-s88 without connection to a digital command station or without a PC with Model Railway Software a timing generator for the s88 Feedback bus will be required. This task will be provided by the new s88-ClockMaster.
Available ex warehouse.
> To product description: s88-ClockMaster
KeyCommander: Functional extension for up to 16 drive ways
With the KeyCommander (KeyCom), available by us for several years, is it now possible to benefit from the advantage of the simple and reduced wiring of a digital layout even on your analogue layouts. Previously was it possible to program up to 8 drive ways. After the functional extension is it now possible to program max. 16 drive ways with up to 16 switch commands on each Rail-Road.
The KeyCommander is not anymore available.
> To product description: KeyCommander
LS-DEC-FS: Light-Signal Decoder for light signals of the Governmental Railway Corporation of Italy – Ferrovie dello Stato (FS)
With the Light-Signal Decoder LS-DEC-FS is the digital switching of up to four 3- to 4- aspect signals or up to two 11-aspect signals of the company Essemme S.r.l. (Mailand, Italien) possible.
Available ex warehouse.
> To product description: LS-DEC-FS
LS-DEC-SJ: Light-Signal Decoder for light signals of the Swedish State Railway (SJ)
With the Light-Signal Decoder LS-DEC-SJ is the digital switching of up to four Hsi2- or Hsi3-Light Signals with 2- or 3- signal aspects or up to two Fsi2-, Fsi3-, Hsi4- or Hsi5- Light Signals with 2- to 7- signal aspects possible.
Available ex warehouse.
> To product description: LS-DEC-SJ
Digital-Novelties 2012:
DSW-88-N: Data switch available now for the bus connection acc. to s88-N
Normally the s88-feedback bus expects all connected feedback modules behind each others in one line. The data switch DSW-88-N provides the possibility to split the s88-feedback output!
The data switch DSW-88-N provides in addition three 6-poles pin bars for the s88 standard connection and as well three RJ-45 sockets for a bus connection according to s88-N.
Available ex warehouse.
> To product description: DSW-88-N
LS-DEC-BR: Light-Signal Decoder for British Railway Light-Signals
Via the Light-Signal-Decoder LS-DEC-BR is the connection and control of either four 2- to 4-aspect signals or two 2- to 4-aspect signals with feather possible.
Available ex warehouse.
> To product description: LS-DEC-BR
LS-DEC-KS: Light-Signal Decoder for Ks-Signals with up to 16 Signal-Aspects
Via the Light-Signal-Decoder LS-DEC-KS is the digital switching of two Ks-Signals of the Ks-Signalsystem from the Deutsche Bahn possible. It is possible to connect and control Ks-Entry, Ks-Exit, Ks-Advance-Signals and as well Ks-Entry- and Ks-Exit-Multiple-Section-Signals with up to 16 Signal-Aspects.
Available ex warehouse.
> To product description: LS-DEC-KS
Digital-Novelties 2011:
BTM-SG: Booster Keep Separate Module
The Booster Keep Separation Module BTM-SG provides a secure electrical separation of Booster Circuits. A switch-over track, situated between two booster circuits as separation section will receive only from one booster digital current supply depending to the travelling direction of the train.
Available ex warehouse.
> To product description: BTM-SG
RS-8-G: Now as well available as finished module in a case
The 8-fold Feedback Module RS-8 contains integrated track occupancy sensors. This module is suitable for monitoring isolated track sections which receive digital current from the RS-8. The design of the RS-8 is suitable for the application at the RS-Feedback Bus of the Digital plus System of company Lenz. The RS-8 is now available as finished module in a case under order code RS-8-G.
Available ex warehouse.
> To product description: RS-8
TT-DEC-R: Turntable-Decoder for the Roco H0 Turntable 42615
The Turntable-Decoder TT-DEC-R is suitable for the digital drive of the Roco H0 Turntable 42615.
Available ex warehouse.
> To product description: TT-DEC-R
Digital-Novelties 2010:
Adap-HSI-s88-N: Adapter for the Interfaces HSI-88, HSI-88-USB and DiCoStation for s88-Bus-connection according to s88-N
The Adapter Adap-HSI-s88-N enables to connect s88-Feedbackmodules such as RM-88-N, RM-88-N-O and RM-GB-8-N according to s88-N directly to the Interfaces HSI-88, HSI-88-USB and DiCoStation via the screened Patch-Kabel.
Available ex warehouse.
> To product description: Adap-HSI-s88-N
DB-4: DigitalBooster with 2,5 or 4,5 Ampere plus additional features
The DigitalBooster DB-4 provides 2,5 or 4,5 Ampere digital current and supports the digital formats Märklin-Motorola and DCC. With the galvanic separated booster bus connection (5-poles-, CDE- and Roco-booster bus) is it possible to use it on several command stations.
Available ex warehouse.
> To product description: DB-4
LI-LAN: LAN-Interface (PC-Netzwork) for Light-Control Light-at-Night
The Light-Interface LI-LAN is a PC-Network-Interface for the Model Railway Layout- and Ambient-Room Light-Control Light@Night.
Available ex warehouse.
> To product description: LI-LAN
LDT-02: Enpty Case for the DigitalBooster DB-4 and the Feedback-Module RM-GB-8-N
Empty case for the DigitalBooster DB-4 and the 8-fold Feedback-Module RM-GB-8-N.
Available ex warehouse.
> To product description: LDT-02
RM-GB-8-N-G: The 8-fold Feedback-Module with integrated track occupancy report is now available as finished module in a case
The 8-fold Feedback-Module with integrated track occupancy report (novelty 2009) is now available as finished module in a case LDT-02.
Available ex warehouse.
> To product description: RM-GB-8-N