Overview Products

Within the following listing you can find all products of our company. By activating a particular link you will receive detailed information and the possibility to order the article.

Further overviews about our products:

Switching

At the section “Switching ” our program offers decoders for the digital formats of Märklin-Motorola and DCC.

Turnout Decoder

  • S-DEC-4: 4-fold turnout decoder for Märklin-Motorola and DCC Digital with a self-learning decoder address. With an external power supply possibility.
  • 1-DEC-DC: 4-fold turnout decoder for LGB-Drive EPL 12010 as well as KATO-, TOMIX- and ROKUHAN-Drives for DCC Digital with a self-learning decoder address.
  • DSU: Permanent-Power-Switch-Unit as accessory for the turnout decoder S-DEC-4 and for the turntable decoder TT-DEC.

Switch Decoder

  • SA-DEC-4: 4-fold switch decoder with 4 bistable relays with each 4 Amp. switching power. With self learning decoder address and external power supply possibility.

Turnout-Decoder for motor driven turnouts

  • M-DEC: 4-fold decoder for motor driven turnouts with self-learning decoder address and external power supply possibility.

Light-Signal Decoder

4-fold Light-Signal Decoder with a self-learning decoder address and external power supply possibility for Märklin-Motorola-Format and DCC-Systems.

  • LS-DEC-DB: Light-Signal Decoder (Deutsche Bundesbahn).
  • LS-DEC-DR: Light-Signal Decoder (Deutsche Reichsbahn).
  • LS-DEC-KS: Light-Signal Decoder (Deutsche Bahn).
  • LS-DEC-OEBB: Light-Signal Decoder (Austrian Federal Railway).
  • LS-DEC-SBB: Light-Signal Decoder (Swiss Federal Railway).
  • LS-DEC-NS: Light-Signal Decoder (Nederlandse Spoorwegen).
  • LS-DEC-NMBS: Light-Signal Decoder (Nationale Maatschapping of the Belgian Spoorwegen).
  • LS-DEC-BR: Light-Signal Decoder (British Railway).
  • LS-DEC-FS: Light-Signal Decoder (Governmental Railway Corporation of Italy – Ferrovie dello Stato).
  • LS-DEC-SJ: Light-Signal Decoder (Swedish State Railway).
  • LS-DEC-SNCF: Light-Signal Decoder (Governmental Railway Corporation of French - Société Nationale des Chemins de fer Français).
  • LS-DEC-CFL: Light-Signal Decoder (National Railway Company of Luxembourg).
  • LS-DEC-USA: Light-Signal Decoder (for American Color Light Signals).
  • LS-DEC-CSD: Light-Signal Decoder (Czechoslovakian National Railway).
  • LS-DEC-8x2: Light-Signal Decoder (for eight 2-aspect Light Signals).

Adapter for Light-Signal Decoder

  • Adap-LS-A: Adapter for Light-Signal Decoder LS-DEC for light signals with incandescent lamps, light signals with incandescent lamps and light emitting diodes with common anodes.
  • Adap-LS-K: Adapter for Light-Signal Decoder LS-DEC for light signals with light emitting diodes with common cathodes.

Train Influence Module for Light-Signal Decoder

  • ZBM: 4-fold train influence module for 4 stop sections. Cuts off the driving power supply if signal is on red.

TurnTable-Decoder

  • TT-DEC-R: The Turntable-Decoder TT-DEC-R is suitable for the digital control of the Roco H0 Turntable 42615.
  • TT-DEC: The Turntable-Decoder TT-DEC is suitable for the digital control of Fleischmann-Turntables 6052, 6152, 6154, 6651, 9152, 6680 (with and without ”C”), 6652 (with 3-rail conductor), the Roco Turntable 35900 and the Märklin-Turntable 7286.
  • DSU: Permanent-Power-Switch-Unit will change the polarity of a 2-conductor turntable bridge at every 180 degree turning of the turntable if combined with the TurnTable-Decoder TT-DEC.

WatchDog-Decoder

  • WD-DEC: The WatchDog decoder WD-DEC is a watch-dog for your pc supported digital model-train-railroad. If the model railway software has lost the control about the layout, the WD-DEC will switch the tracks free of current via the connected boosters and all trains will be immediately stopped.

Decoder for Switchboard Lights

  • GBS-DEC: The Decoder for Switchboard Lights GBS-DEC supplies current to the light emitting diodes or to the incandescent lamps of the track switchboard panel. The GBS-DEC is available for the digital formats Märklin-Motorola and DCC as well for the s88-feedback bus. The Decoder for Switchboard Lights GBS-DEC consist of a GBS-Master Module, a GBS-Display Module and the GBS-Service Module.
  • s88-ClockMaster: As a supplement to the Switchboard Light-Decoder GBS-DEC to be used without a digital command station or without a PC with model railway software.

Feedback

For “Feedback” we offer products for the s88- and the RS-Feedback bus. For the Roco feedback module 10787 we offer suitable track occupancy module within our program.

s88-feedback bus

  • RM-88-N: 16-fold Standard-Feedback Module (switching against ground) for s88-standard connections and bus connections in accordance to s88-N.
  • RM-88-N-O: 16-fold Feedback Module with opto-coupling inputs for potential separation and for high interference protection. For s88-standard connections and bus connections in accordance to s88-N.
  • RM-GB-8-N: 8-fold Feedback Module with integrated track occupancy report for s88-standard connections and bus connections in accordance to s88-N.
  • DSW-88-N: With the Data switch DSW-88-N the s88-feedback bus can be branched into two lines at any place on the model railway. Several DSW-88-N can be used to build one ore more feedback lines. For s88-standard connections and bus connections in accordance to s88-N.

RS-feedback bus

  • RS-16-O: 16-fold feedback module with opto isolated inputs for high safety against interference and for potential separation.
  • RS-8: 8-fold feedback module with integrated occupancy detectors for a current load up to 3 Ampere (peak current 7 Ampere).

Roco-feedback bus

  • GBM-8: 8-fold track occupancy detector e.g. for extension of the Roco-feedback module 10787.

DigitalBooster

  • DB-2: The short-circuit proofed DigitalBooster DB-2 supplies 2.5 Ampere digital current. The DB-2 shall be connected to the command station via a 5-poles booster bus and amplifies the digital formats Märklin-Motorola, mfx®, M4 and DCC.
  • DB-4: The DigitalBooster DB-4 provides 2.5 or 4.5 Ampere digital current. Via the galvanic separated booster bus (5-poles-, CDE- and Roco-booster bus) is it possible to connect it to the command station and amplifies the digital formats Märklin-Motorola, mfx®, M4 and DCC.

Boosteradapter for the DigitalBooster DB-2

For the application of the low-cost DigitalBooster DB-2 on the Lenz- and Roco-Central Units we have the Adapter “Adap-CDE” and “Adap-Roco” in our program.

  • Adap-CDE: The booster adapter Adap-CDE enables to connect up to 10 low cost DigitalBooster DB-2 as well to a command station which supports the 3 poles DCC booster bus (clamp indication CDE) instead the 5 poles buster bus.
  • Adap-Roco: The booster adapter Adap-Roco enables to connect up to 10 low cost DigitalBooster DB-2 as well to a Roco-command station 10761/10764 or onto Fleischmann 680801 and multiZENTRALEpro.

Booster Keep Separate Module

  • BTM-SG: Provides a secure electrical separation of booster current circuits. Suitable for all digital formats, all command stations and boosters.

Command Stations

As Digital Command Stations we offer our DiCoStation for the direct operation of the model railway via the PC and the KeyCommander for the digital control of your layout with a switchboard panel.

  • DiCoStation: DirectCommandStation for monitoring and control of your digital model railway layout via a PC-software (e.g. Railware, TrainController, WinDigipet). For the USB-interface (1.1 / 2.0 Full-Speed) with the digital format DCC and Märklin-Motorola plus three s88-feedback lines.
  • Adap-HSI-s88-N: With the Adapter is it possible to connect s88-feedback modules in accordance to s88-N direktly to the DiCoStation.
  • KeyCom: The KeyCommander makes a digital switching by push button of turnouts and signals on analog layouts possible. Advantage: considerable less wiring required and a better circuit identification.

Reverse-Loop Module

  • KSM-SG: The short circuit protected polarity reversal of the reverse loop will be performed by sensor tracks. Suitable for digital operation (all formats).

High Speed Interfaces

Legal Doping: High Speed Interface for the s88-feedbackbus!
To provide feedback reports fast and without detours via the digital command station to the PC we offer the High Speed Interfaces HSI-88 for the s88-feedback bus within our program. With this option you can install up to 3 s88-feedback lines with up to 496 contacts.

  • HSI-88: High-Speed-Computer-Interface for fast report of s88-feedback modules to the PC via the COM-interface.
  • HSI-88-USB: High-Speed-Computer-Interface for fast report of s88-feedback modules to the PC via the USB-interface (1.1 / 2.0 Full-Speed).
  • Adap-HSI-s88-N: With the Adapter is it possible to connect s88-feedback modules in accordance to s88-N direktly to the interfaces.

Train-Identification

The basic for the train number identification TrainDetect is the Transponder-Technology. This is as well known as the short-cut RFID (Radio Frequency Identification).

  • COL-10: The Transponder-Reader COL-10 can read the transponder data via an external antenna.
  • SNG-10: Plug-In power supply (13,5V / 1A) for the supply of max. 10 Transponder-Reader COL-10.
  • TD-88: The interface feeds the train-number identification (transponder-data) into the s88-feedback-bus. It is possible to connect up to 31 COL-10 reading devices to the TD-88.
  • INTER-10:The interface feeds the train-number identification (transponder-data) via the serial COM-interface directly into the PC. It is possible to connect up to 99 reading devices COL-10 to the INTER-10.

Light Control

  • Light@Night: Comfortable PC-light control for analog and digital model railway layouts.
  • Light-DEC: Universal Layout-Light-Control for analogue and digital model railway layouts.
  • Light-Display: Light module for the Light Controls Light@Night and Light-DEC with 40 outputs with 0,5 Ampere each.
  • Light-Power: Light module for the Light Controls Light@Night and Light-DEC with 24 outputs with 2,5 Ampere each.

SupplyBox

  • SB-4: Practical unit for the direct current supply from switched mode mains power supply.

Accessories

Here you can find e.g. Assembly Material, Casings or Bus cable for our Components.

  • MON-SET: For fitting devices underneath the layout we supply suitable installation material consisting of four spacers each 5mm long and four 13mm screws.
  • LDT-01: The small elegant practical case for several LDT-components. Suitable for: 1-DEC-DC (from version 2), Adap-CDE, Adap-Roco, COL-10, DB-2, DSW-88-N, GBM-8, HSI-88 (-USB), KeyCom, KSM-SG, LS-DEC, M-DEC (from version 2), RM-88-N, RM-88-N-O, RS-16-O, s88-CM, S-DEC-4, SA-DEC-4, SB-4, TD-88, TT-DEC(-R), BTM-SG, WD-DEC and ZBM.
  • LDT-02: The big elegant practical case for LDT-components. Suitable for: DB-4, RM-GB-8-N and RS-8 (from version 3.2.).
  • G-1-DEC: Splash-water protected case for Turnout Decoder 1-DEC-DC up to version 1.3.
  • G-2-DEC: Splash-water protected case for Turnout Decoder 1-DEC-DC from version 2.
  • Kabel s88: Connection cable (0,5m, 1m, 2m) for s88-standard connection with two original s88-plugs plus pin-plug for bus extension.
  • Kabel Patch: Connection cable (0,5m, 1m, 2m, 3m) for s88-standard connections according to s88-N with 2 RJ-45 plugs.
  • Kabel Booster: 5-poles booster bus-cable (1m) with twisted wires and interference protected for the connection of command stations (e.g. Control Unit, Central Station 2, Intellibox, TWIN-CENTER) with boosters (e.g. 6015 / 6017, Power 3, TWIN-BOOSTER, DB-2, DB-4) and for connecting boosters to each other.
  • Kabel Roco: Roco booster bus-cable (1m) for the connection of the DigitalBooster DB-4 with Roco 10761/10764 and Fleischmann 680801, multiZENTRALEpro and z21/Z21.
  • Kabel Light@Night: Connection cable (0,5m, 1m, 2m) for Light-Display- and Light-Power-Module.
  • Ferrite pearls: For the elimination of disturbance caused by turnouts with integrated end switches.
  • Electronic articles: Electronic articles for Model-Railroader.
  • Electronic Spare Parts: Electronic Spare Parts for LDT-Components.



Subject to technical changes and errors.
© 2018 by LDT

 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki Design by Chirripó