Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen gezeigt.

en:gbs-dec [2018/04/23 11:35] (current)
Line 1: Line 1:
 +====== GBS-DEC ======
  
 +=== Decoder for Switchboard Lights from the Digital-Professional-Series ! ===
 +
 +{{  :de:cad:gbs-demo.gif  }}
 +
 +====== Features ======
 +
 +**To track** and **influence** the events of a layout with a **switchboard** is much **more comfortable** as done with a PC-Monitor.
 +
 +Either you assemble your **own switchboard** or you combine components of available **switchboard systems**.
 +
 +But how are getting the **switchboard informations to the PC** and the **informations of turnout status and track occupancy** from the **digital system** to the **switchboard**?
 +
 +----
 +\\  For **PC-supported digital systems** with s88-feedback bus **(e.g. Märklin-Interface, Cental Station 1 and 2, ECoS, Intellibox, TWIN-CENTER, DiCoStation, High Speed Interface HSI-88(-USB))** is the transfer of the **turnout-key information** from the switchboard via **feedback modules** possible at relative low cost.
 +
 +**16 switch keys** for turnouts or other functions can be connected to one **Feedback Module [[:en:rm-88-n|RM-88-N]]**.
 +
 +{{  :de:cad:rm88n_gbs_01.gif  }}
 +
 +By using the **Dataswitch [[:en:dsw-88-n|DSW-88-N]]** it will be easy to branch to the **feedback modules** within the **switchboard**.
 +
 +{{  :de:cad:dsw-88-n-gbs_13.gif  }}
 +
 +At the **left line** there are the **feedback modules** of the **layout** located. At the **right line** are the **feedback modules** of the **switch board**. If the **existing digital system** shall be **extended** by one **switch board** the **feedback module contacts have not to be re-numbered** whenever the **dataswitch [[:en:dsw-88-n|DSW-88-N]]** will be used as shown above.
 +
 +----
 +\\  The status of **turnout positions and occupancy informations** of the **layout** shall now be **transferred to the switchboard** to enable the **illuminated indication** of the **turnout- and drive track-symbols** as on a PC-monitor.
 +
 +Just there comes the new **Decoder for Switchboard Lights GBS-DEC** into action.
 +
 +{{  :de:foto:gbs-startset-dc_ic.jpg  }}
 +
 +====== The Decoder for Switchboard Lights GBS-DEC consist of three components: ======
 +
 +===== 1. GBS-Master =====
 +
 +The **GBS-Master** module (87mm x 89mm) which is connected to the **digital-current-circuit** (e.g. J and K or red and brown at the command station or at the booster) or the **s88-Feedback bus** for "bugging" the informations.
 +
 +{{  :de:foto:gbs-master_12_01.jpg?640x480  }}
 +
 +===== 2. GBS-Display =====
 +
 +The **GBS-Display** module (110mm x 89mm) which can illuminate up to **16 turnout-** or **32 track occupancy symboles** at the switchboard. Onto each GBS-Master module can be up to **4 GBS-Display** modules connected. Each GBS-Display output can supply a current of **0,5 Ampere**. Each **GBS-Display** module can supply a **total current of 3 Ampere**. This makes it possible to employ **light emitting diodes** (with serial resistor) as well as **model railway incandescent lamps** of the switchboard.
 +
 +{{  :de:foto:light-display_18_ic.jpg?640  }}
 +
 +===== 3. GBS-Service =====
 +
 +The **GBS-Service** module (92mm x 71mm) which will be used for **programming the addresses**. After all adjustments have been settled the connection of the GBS-Service module is not longer required during the operation. It can be disconnected from the GBS-Master module and can be used for programming addresses on further GBS-Master modules.
 +
 +{{  :de:foto:gbs-service_10_01.jpg?640x480  }}
 +
 +====== Illumination of turnout symboles on the switchboard: ======
 +
 +{{  :de:cad:gbs-dec_01.gif?642x258  }}The **Decoder for Switchboard Lights GBS-DEC** can be **connected** to the **digital current circuit** as any other decoder. On this way the **GBS-DEC** receives the switch-information for the illuminated indication of turnouts from the command station or from the PC.
 +
 +As a turnout decoder (e.g. turnout decoder **[[:en:s-dec-4|S-DEC-4]]**) actually **switches a turnout** when receiving a corresponding command from the command station the **GBS-DEC** will indicate the status of the relevant turnout at the **switchboard** by switching the **illuminated indication of the turnout** at the same time.
 +
 +The **GBS-DEC** is available for the **digital format Märklin-Motorola** and **DCC**. If you control the turnouts on your layout within the Märklin Motorola format the master module **GBS-Master-MM** will be suitable. For the application of the DCC format the master module **GBS-Master-DC** has to be used.
 +
 +To avoid a **non-necessary load of the digital current circuit** for the **illuminated indication at the switch board** the **GBS-DEC** can get the power supply by a simple **light-transformer**.
 +
 +On this way can get **drive tracks** the illuminated indication via accessible **turnout addresses**. For this events turnout addresses can be used which have not been occupied for switching turnouts.
 +
 +====== Illumination of track occupancy symboles on the switchboard: ======
 +
 +If using the GBS-Master module **GBS-Master-s88** the **GBS-DEC** will be operated within the **s88-mode**. Then can the **GBS-DEC** "bug" the **s88-bus** and can **directly** switch the **illuminated indication** of the relevant track section at the switchboard when receiving an occupancy information.
 +
 +{{  :de:cad:gbs-dec_02.gif?642x254  }}If also the **turnout position** shall be **controlled via the s88-bus** the turnout symbol at the switch board will indicate the actual turnout status.
 +
 +For your information how to control turnouts via the s88-feedback bus you can download the file **"Feedback of the turnout position"** at the page **[[:en:dl_rm_88_n-o|Downloads]]** at the Internet.
 +
 +{{  :de:cad:gbs-dec_03.gif?643x253  }}
 +
 +__**The following picture shows the possibilities:**__
 +
 +At the sample can be 16 turnouts switched via the switchboard. The turnout keys of the switch board will be read via the 2 right side feedback modules **[[:en:rm-88-n|RM-88-N]]**.
 +
 +{{  :de:cad:dsw-88-n-gbs_20.gif  }}
 +
 +The feedback information (rail contacts and turnout feedback information) of the layout will be transferred from the left feedback modules **[[:en:rm-88-n-o|RM-88-N-O]]** via the control unit (here Intellibox) to the PC.
 +
 +The **GBS-DEC** can evaluate the feedback information received via the s88-bus and switch the illuminated indication of the turnout symboles in accordance to the actual turnout status. Even if a turnout will be switched manually the new turnout position will be immediately indicated at the switch board.
 +
 +Also the PC receives this information and the monitor switch board will be actualized.
 +
 +Each **GBS-Module** will be supplied with a detailed operating-/respectively assembly-instruction. Those instructions can be found within the next section.
 +
 +The components **GBS-Service** and **GBS-Display** for the Switchboard Light Decoder (GBS-DEC) are available as **kit (-B)** or as checked **finished module (-F)**. **GBS-Master Modules** are available as **finished module (-F)**.
 +====== Downloads ======
 +
 +Instructions regarding this article can be found here: [[:en:dl_gbs_dec|Downloads GBS-DEC]].\\
 +Instructions for all LDT-Components can be found here: [[:en:downloads|Overview Downloads]].
 +
 +====== Sample-Connections ======
 +
 +Sample-connections regarding this article can be found here:  [[:en:ab_gbs_dec|Sample-Connections GBS-DEC]].\\
 +Sample-connections for all LDT-Components can be found here: [[:en:anschlussbeispiele|Overview Sample-Connections]].\\
 +{{  :de:cad:page_1517.gif  }}
 +
 +====== Add to Wish List / Prices ======
 +
 +**Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.** 
 +
 +^{{:de:images:noticelist_m.png}} | \\  {{:de:images:blindgif.gif?500x1  }} \\ <html>Add to <b><u class="linkit" onclick="toNoticeList('050322');">Wish List</u></b></html>: **GBS-Master-MM-F** (Part-No.: 050322): **Master-Module** for the\\ Decoder for Switchboard Lights GBS-DEC for **Märklin-Motorola** as a **finished module** (**75,90 €***).\\  \\ <html>Add to <b><u class="linkit" onclick="toNoticeList('050222');">Wish List</u></b></html>: **GBS-Master-DC-F** (Part-No.: 050222): **Master-Module** for the\\ Decoder for Switchboard Lights GBS-DEC for **DCC** as a **finished module** (**75,90 €***).\\  \\ <html>Add to <b><u class="linkit" onclick="toNoticeList('050122');">Wish List</u></b></html>: **GBS-Master-s88-F** (Part-No.: 050122): **Master-Module** for the\\ Decoder for Switchboard Lights GBS-DEC for the **s88-Mode** as a **finished module** (**75,90 €***).\\  \\ <html>Add to <b><u class="linkit" onclick="toNoticeList('050031-gbs');">Wish List</u></b></html>: **GBS-Display-B** (Part-No.: 050031): **Display-Module** for the\\ Decoder for Switchboard Lights GBS-DEC as a **kit** (**59,90 €***).\\ <html>Add to <b><u class="linkit" onclick="toNoticeList('050032-gbs');">Wish List</u></b></html>: **GBS-Display-F** (Part-No.: 050032): **Display-Module** for the\\ Decoder for Switchboard Lights GBS-DEC as a **finished module** (**79,90 €***).\\  \\ <html>Add to <b><u class="linkit" onclick="toNoticeList('050041');">Wish List</u></b></html>: **GBS-Service-B** (Part-No.: 050041): **Service-Module** for the\\ Decoder for Switchboard Lights GBS-DEC as a **kit** (**26,90 €***).\\ <html>Add to <b><u class="linkit" onclick="toNoticeList('050042');">Wish List</u></b></html>: **GBS-Service-F** (Part-No.: 050042): **Service-Module** for the\\ Decoder for Switchboard Lights GBS-DEC as a **finished module** (**39,90 €***).\\  \\  \\  **Startsets consisting of: 1 piece GBS-Master, 1 piece GBS-Display and 1 piece GBS-Service.**  \\  \\ <html>Add to <b><u class="linkit" onclick="toNoticeList('050352');">Wish List</u></b></html>: **GBS-Startset-MM-F** (Part-No.: 050352): **Decoder for Switchboard Lights Startset**  \\ for **Märklin-Motorola** as a **finished module** (**184,90 €***).\\  \\ <html>Add to <b><u class="linkit" onclick="toNoticeList('050252');">Wish List</u></b></html>: **GBS-Startset-DC-F** (Part-No.: 050252): **Decoder for Switchboard Lights Startset**\\ for **DCC** as a **finished module** (**184,90 €***).\\  \\ <html>Add to <b><u class="linkit" onclick="toNoticeList('050152');">Wish List</u></b></html>: **GBS-Startset-s88-F** (Part-No.: 050152): **Decoder for Switchboard Lights Startset**\\ for the **s88-Mode** as a **finished module** (**184,90 €***).\\ {{:de:images:blindgif.gif?580x1}} \\  ** * All prices incl. VAT, plus Shipping.**  |
 +
 +[[:en:gbs-dec#gbs-dec|{{  :de:images:zurueck_en_page.png?40x32}}]] Subject to technical changes and errors.\\
 +© 2018 by LDT
 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki Design by Chirripó