KSM-SG

Reverse-Loop Module with short-circuit protected reversal polarity via Sensor Tracks for digital operation (all formats) from the Digital-Professional-Series !

Features of the KSM-SG

  • The polarity reversal of the Reverse-Loop will be carried out without short circuit via 2 sensor tracks at the entrance and at the exit of the Reverse-Loop.

  • Both rails of the sensor tracks (A1/B1 and A2/B2) and the Reverse-Loop (AK/BK) will be completely isolated and connected to the respective marked clamps at the Reverse-Loop Module KSM-SG.
  • The optimal length of the sensor tracks will be 5 to 20cm.
  • The minimum length of the reverse-loop track has to be as long as the longest train on the layout.
  • The Reverse-Loop Module KSM-SG can switch up to 8 Ampere digital current.
  • With reason to an external power supply possibility is a simple control of the reverse-loop with track occupancy module (e.g. RM-GB-8-N or RS-8) possible. The sensor tracks will be controlled as well.

The Reverse-Loop Module KSM-SG from the Digital-Professional-Series can be operated without any problem on your digital controlled layout.

The finished module and the finished module in a case comes with a 24 month warranty.

Each Reverse-Loop Module KSM-SG will be supplied with a detailed operating-/respectively assembly-instruction. Those instructions can be found within the next section.

You can purchase the KSM-SG as a kit (-B), as tested finished module (-F) or as tested finished module in a case (-G).

Downloads

Instructions regarding this article can be found here: Downloads KSM-SG.
Instructions for all LDT-Components can be found here: Overview Downloads.

Sample-Connections

Sample-connections regarding this article can be found here: Sample-Connections KSM-SG.
Sample-connections for all LDT-Components can be found here: Overview Sample-Connections.

Add to Wish List / Prices

Attention: Products can only be added to the Wish List, if you are registered as customer at the LDT WebShop or if you are initially registered by interest of our products.


Add to Wish List: KSM-SG-B (Part-No.: 700501): Reverse-Loop Module as a kit (41,50 €*).
Add to Wish List: KSM-SG-F (Part-No.: 700502): Reverse-Loop Module as a finished module (54,90 €*).
Add to Wish List: KSM-SG-G (Part-No.: 700503): Reverse-Loop Module as a finished module in a case (58,50 €*).

* All prices incl. VAT, plus Shipping.

Subject to technical changes and errors.
© 2017 by LDT
Märklin and Motorola are registered trade marks.

 
Recent changes RSS feed Creative Commons License Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki Design by Chirripó